From: Richard Kuo Date: Fri, 22 Mar 2013 21:05:40 +0000 (-0500) Subject: Hexagon: add support for ARCH_PFN_OFFSET X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8f5a0b9dffeb3cb94f2b0622b6fe0717512ef54b;p=linux-beck.git Hexagon: add support for ARCH_PFN_OFFSET Add support for loading the kernel at a physical offset. The offset should still be 4M aligned. Signed-off-by: Richard Kuo --- diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig index e4decc6b8947..dd89a7245ac4 100644 --- a/arch/hexagon/Kconfig +++ b/arch/hexagon/Kconfig @@ -33,6 +33,7 @@ config HEXAGON Qualcomm Hexagon is a processor architecture designed for high performance and low power across a wide variety of applications. + config HEXAGON_ARCH_V1 bool @@ -45,6 +46,11 @@ config HEXAGON_ARCH_V3 config HEXAGON_ARCH_V4 bool +config HEXAGON_PHYS_OFFSET + def_bool y + ---help--- + Platforms that don't load the kernel at zero set this. + config FRAME_POINTER def_bool y diff --git a/arch/hexagon/include/asm/hexagon_vm.h b/arch/hexagon/include/asm/hexagon_vm.h index c144bee6cabe..6b81e4d5ecb1 100644 --- a/arch/hexagon/include/asm/hexagon_vm.h +++ b/arch/hexagon/include/asm/hexagon_vm.h @@ -31,10 +31,26 @@ * for tracing/debugging. */ -/* - * Lets make this stuff visible only if configured, - * so we can unconditionally include the file. - */ +#define HVM_TRAP1_VMVERSION 0 +#define HVM_TRAP1_VMRTE 1 +#define HVM_TRAP1_VMSETVEC 2 +#define HVM_TRAP1_VMSETIE 3 +#define HVM_TRAP1_VMGETIE 4 +#define HVM_TRAP1_VMINTOP 5 +#define HVM_TRAP1_VMCLRMAP 10 +#define HVM_TRAP1_VMNEWMAP 11 +#define HVM_TRAP1_FORMERLY_VMWIRE 12 +#define HVM_TRAP1_VMCACHE 13 +#define HVM_TRAP1_VMGETTIME 14 +#define HVM_TRAP1_VMSETTIME 15 +#define HVM_TRAP1_VMWAIT 16 +#define HVM_TRAP1_VMYIELD 17 +#define HVM_TRAP1_VMSTART 18 +#define HVM_TRAP1_VMSTOP 19 +#define HVM_TRAP1_VMVPID 20 +#define HVM_TRAP1_VMSETREGS 21 +#define HVM_TRAP1_VMGETREGS 22 +#define HVM_TRAP1_VMTIMEROP 24 #ifndef __ASSEMBLY__ @@ -175,25 +191,6 @@ static inline long __vmintop_clear(long i) #else /* Only assembly code should reference these */ -#define HVM_TRAP1_VMRTE 1 -#define HVM_TRAP1_VMSETVEC 2 -#define HVM_TRAP1_VMSETIE 3 -#define HVM_TRAP1_VMGETIE 4 -#define HVM_TRAP1_VMINTOP 5 -#define HVM_TRAP1_VMCLRMAP 10 -#define HVM_TRAP1_VMNEWMAP 11 -#define HVM_TRAP1_FORMERLY_VMWIRE 12 -#define HVM_TRAP1_VMCACHE 13 -#define HVM_TRAP1_VMGETTIME 14 -#define HVM_TRAP1_VMSETTIME 15 -#define HVM_TRAP1_VMWAIT 16 -#define HVM_TRAP1_VMYIELD 17 -#define HVM_TRAP1_VMSTART 18 -#define HVM_TRAP1_VMSTOP 19 -#define HVM_TRAP1_VMVPID 20 -#define HVM_TRAP1_VMSETREGS 21 -#define HVM_TRAP1_VMGETREGS 22 - #endif /* __ASSEMBLY__ */ /* @@ -224,6 +221,8 @@ static inline long __vmintop_clear(long i) #define HVM_VMEST_UM_MSK 1 #define HVM_VMEST_IE_SFT 30 #define HVM_VMEST_IE_MSK 1 +#define HVM_VMEST_SS_SFT 29 +#define HVM_VMEST_SS_MSK 1 #define HVM_VMEST_EVENTNUM_SFT 16 #define HVM_VMEST_EVENTNUM_MSK 0xff #define HVM_VMEST_CAUSE_SFT 0 @@ -260,6 +259,8 @@ static inline long __vmintop_clear(long i) #define HVM_GE_C_INVI 0x15 #define HVM_GE_C_PRIVI 0x1B #define HVM_GE_C_XMAL 0x1C +#define HVM_GE_C_WREG 0x1D +#define HVM_GE_C_PCAL 0x1E #define HVM_GE_C_RMAL 0x20 #define HVM_GE_C_WMAL 0x21 #define HVM_GE_C_RPROT 0x22 diff --git a/arch/hexagon/include/asm/mem-layout.h b/arch/hexagon/include/asm/mem-layout.h index af16e977c55e..1426cd71a1d3 100644 --- a/arch/hexagon/include/asm/mem-layout.h +++ b/arch/hexagon/include/asm/mem-layout.h @@ -32,16 +32,25 @@ #define PAGE_OFFSET _AC(0xc0000000, UL) /* - * LOAD_ADDRESS is the physical/linear address of where in memory - * the kernel gets loaded. The 12 least significant bits must be zero (0) - * due to limitations on setting the EVB - * + * Compiling for a platform that needs a crazy physical offset + * (like if the memory starts at 1GB and up) means we need + * an actual PHYS_OFFSET. Should be set up in head.S. */ -#ifndef LOAD_ADDRESS -#define LOAD_ADDRESS 0x00000000 +#ifdef CONFIG_HEXAGON_PHYS_OFFSET +#ifndef __ASSEMBLY__ +extern unsigned long __phys_offset; +#endif +#define PHYS_OFFSET __phys_offset +#endif + +#ifndef PHYS_OFFSET +#define PHYS_OFFSET 0 #endif +#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) +#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET + #define TASK_SIZE (PAGE_OFFSET) /* not sure how these are used yet */ diff --git a/arch/hexagon/include/asm/page.h b/arch/hexagon/include/asm/page.h index 692adc213429..de1b2871d09c 100644 --- a/arch/hexagon/include/asm/page.h +++ b/arch/hexagon/include/asm/page.h @@ -96,8 +96,8 @@ typedef struct page *pgtable_t; * MIPS says they're only used during mem_init. * also, check if we need a PHYS_OFFSET. */ -#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET) -#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET)) +#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET) +#define __va(x) ((void *)((unsigned long)(x) - PHYS_OFFSET + PAGE_OFFSET)) /* The "page frame" descriptor is defined in linux/mm.h */ struct page; @@ -147,6 +147,7 @@ static inline void clear_page(void *page) */ #define kern_addr_valid(addr) (1) +#include #include /* XXX Todo: implement assembly-optimized version of getorder. */ #include diff --git a/arch/hexagon/kernel/head.S b/arch/hexagon/kernel/head.S index d859402c73ba..477320c455f7 100644 --- a/arch/hexagon/kernel/head.S +++ b/arch/hexagon/kernel/head.S @@ -43,14 +43,21 @@ ENTRY(stext) * Symbol is kernel segment address, but we need * the logical/physical address. */ - r24 = asl(r24, #2) - r24 = lsr(r24, #2) + r25 = pc; + r2.h = #0xffc0; + r2.l = #0x0000; + r25 = and(r2,r25); /* R25 holds PHYS_OFFSET now */ + r1.h = #HI(PAGE_OFFSET); + r1.l = #LO(PAGE_OFFSET); + r24 = sub(r24,r1); /* swapper_pg_dir - PAGE_OFFSET */ + r24 = add(r24,r25); /* + PHYS_OFFSET */ - r0 = r24 + r0 = r24; /* aka __pa(swapper_pg_dir) */ /* - * Initialize a 16MB PTE to make the virtual and physical + * Initialize page dir to make the virtual and physical * addresses where the kernel was loaded be identical. + * Done in 4MB chunks. */ #define PTE_BITS ( __HVM_PTE_R | __HVM_PTE_W | __HVM_PTE_X \ | __HEXAGON_C_WB_L2 << 6 \ @@ -143,6 +150,13 @@ __head_s_vaddr_target: r2 = sub(r2,r0); call memset; + /* Set PHYS_OFFSET; should still be in R25 */ +#ifdef CONFIG_HEXAGON_PHYS_OFFSET + r0.l = #LO(__phys_offset); + r0.h = #HI(__phys_offset); + memw(r0) = r25; +#endif + /* Time to make the doughnuts. */ call start_kernel diff --git a/arch/hexagon/kernel/setup.c b/arch/hexagon/kernel/setup.c index 94a387835008..2e2304f7b7ee 100644 --- a/arch/hexagon/kernel/setup.c +++ b/arch/hexagon/kernel/setup.c @@ -68,6 +68,8 @@ void __init setup_arch(char **cmdline_p) */ __vmsetvec(_K_VM_event_vector); + printk(KERN_INFO "PHYS_OFFSET=0x%08x\n", PHYS_OFFSET); + /* * Simulator has a few differences from the hardware. * For now, check uninitialized-but-mapped memory diff --git a/arch/hexagon/kernel/vmlinux.lds.S b/arch/hexagon/kernel/vmlinux.lds.S index 14e793f6abbf..fafb886511e3 100644 --- a/arch/hexagon/kernel/vmlinux.lds.S +++ b/arch/hexagon/kernel/vmlinux.lds.S @@ -18,8 +18,6 @@ * 02110-1301, USA. */ -#define LOAD_OFFSET PAGE_OFFSET - #include #include /* Most of the kernel defines are here */ #include /* except for page_offset */ @@ -36,13 +34,9 @@ See asm-generic/sections.h for seemingly required labels. #define PAGE_SIZE _PAGE_SIZE -/* This LOAD_OFFSET is temporary for debugging on the simulator; it may change - for hypervisor pseudo-physical memory. */ - - SECTIONS { - . = PAGE_OFFSET + LOAD_ADDRESS; + . = PAGE_OFFSET; __init_begin = .; HEAD_TEXT_SECTION @@ -52,7 +46,7 @@ SECTIONS . = ALIGN(_PAGE_SIZE); _stext = .; - .text : AT(ADDR(.text) - LOAD_OFFSET) { + .text : AT(ADDR(.text)) { _text = .; TEXT_TEXT SCHED_TEXT diff --git a/arch/hexagon/mm/init.c b/arch/hexagon/mm/init.c index 69ffcfd28794..8e803a6e3402 100644 --- a/arch/hexagon/mm/init.c +++ b/arch/hexagon/mm/init.c @@ -31,9 +31,10 @@ * Define a startpg just past the end of the kernel image and a lastpg * that corresponds to the end of real or simulated platform memory. */ -#define bootmem_startpg (PFN_UP(((unsigned long) _end) - PAGE_OFFSET)) +#define bootmem_startpg (PFN_UP(((unsigned long) _end) - PAGE_OFFSET + PHYS_OFFSET)) -unsigned long bootmem_lastpg; /* Should be set by platform code */ +unsigned long bootmem_lastpg; /* Should be set by platform code */ +unsigned long __phys_offset; /* physical kernel offset >> 12 */ /* Set as variable to limit PMD copies */ int max_kernel_seg = 0x303; @@ -44,7 +45,6 @@ unsigned long zero_page_mask; /* indicate pfn's of high memory */ unsigned long highstart_pfn, highend_pfn; -/* struct mmu_gather defined in asm-generic.h; */ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); /* Default cache attribute for newly created page tables */ @@ -71,7 +71,7 @@ void __init mem_init(void) { /* No idea where this is actually declared. Seems to evade LXR. */ totalram_pages += free_all_bootmem(); - num_physpages = bootmem_lastpg; /* seriously, what? */ + num_physpages = bootmem_lastpg-ARCH_PFN_OFFSET; printk(KERN_INFO "totalram_pages = %ld\n", totalram_pages); @@ -193,6 +193,9 @@ void __init setup_arch_memory(void) * This needs to change for highmem setups. */ + /* Prior to this, bootmem_lastpg is actually mem size */ + bootmem_lastpg += ARCH_PFN_OFFSET; + /* Memory size needs to be a multiple of 16M */ bootmem_lastpg = PFN_DOWN((bootmem_lastpg << PAGE_SHIFT) & ~((BIG_KERNEL_PAGE_SIZE) - 1)); @@ -201,12 +204,15 @@ void __init setup_arch_memory(void) * Reserve the top DMA_RESERVE bytes of RAM for DMA (uncached) * memory allocation */ - bootmap_size = init_bootmem(bootmem_startpg, bootmem_lastpg - - PFN_DOWN(DMA_RESERVED_BYTES)); + + max_low_pfn = bootmem_lastpg - PFN_DOWN(DMA_RESERVED_BYTES); + min_low_pfn = ARCH_PFN_OFFSET; + bootmap_size = init_bootmem_node(NODE_DATA(0), bootmem_startpg, min_low_pfn, max_low_pfn); printk(KERN_INFO "bootmem_startpg: 0x%08lx\n", bootmem_startpg); printk(KERN_INFO "bootmem_lastpg: 0x%08lx\n", bootmem_lastpg); printk(KERN_INFO "bootmap_size: %d\n", bootmap_size); + printk(KERN_INFO "min_low_pfn: 0x%08lx\n", min_low_pfn); printk(KERN_INFO "max_low_pfn: 0x%08lx\n", max_low_pfn); /* @@ -221,14 +227,17 @@ void __init setup_arch_memory(void) /* this actually only goes to the end of the first gig */ segtable_end = segtable + (1<<(30-22)); - /* Move forward to the start of empty pages */ - segtable += bootmem_lastpg >> (22-PAGE_SHIFT); + /* + * Move forward to the start of empty pages; take into account + * phys_offset shift. + */ + segtable += (bootmem_lastpg-ARCH_PFN_OFFSET)>>(22-PAGE_SHIFT); { - int i; + int i; - for (i = 1 ; i <= DMA_RESERVE ; i++) - segtable[-i] = ((segtable[-i] & __HVM_PTE_PGMASK_4MB) + for (i = 1 ; i <= DMA_RESERVE ; i++) + segtable[-i] = ((segtable[-i] & __HVM_PTE_PGMASK_4MB) | __HVM_PTE_R | __HVM_PTE_W | __HVM_PTE_X | __HEXAGON_C_UNC << 6 | __HVM_PDE_S_4MB); @@ -256,7 +265,7 @@ void __init setup_arch_memory(void) * Free all the memory that wasn't taken up by the bootmap, the DMA * reserve, or kernel itself. */ - free_bootmem(PFN_PHYS(bootmem_startpg)+bootmap_size, + free_bootmem(PFN_PHYS(bootmem_startpg) + bootmap_size, PFN_PHYS(bootmem_lastpg - bootmem_startpg) - bootmap_size - DMA_RESERVED_BYTES);