From: Ben Dooks Date: Thu, 27 May 2010 08:25:46 +0000 (+0900) Subject: ARM: S5PC100: Change to using s3c_gpio_cfgrange_nopull() X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8f89d5b3b14ba588f744ba394b6c7f00f4dcd49a;p=linux-beck.git ARM: S5PC100: Change to using s3c_gpio_cfgrange_nopull() Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: Ben Dooks Signed-off-by: Kukjin Kim --- diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c index a8d22a7b1581..03c02d04c68c 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c @@ -33,12 +33,10 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) num = width - 2; /* Set all the necessary GPG0/GPG1 pins to special-function 0 */ - s3c_gpio_cfgall_range(S5PC100_GPG0(0), 2 + num, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2)); if (width == 8) - s3c_gpio_cfgall_range(S5PC100_GPG1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP); @@ -51,8 +49,7 @@ void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; /* Set all the necessary GPG2 pins to special-function 2 */ - s3c_gpio_cfgall_range(S5PC100_GPG2(0), 2 + width, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP); @@ -65,8 +62,7 @@ void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; /* Set all the necessary GPG3 pins to special-function 2 */ - s3c_gpio_cfgall_range(S5PC100_GPG3(0), 2 + width, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);