From: Phoebe Buckheister Date: Mon, 17 Feb 2014 10:34:06 +0000 (+0100) Subject: ieee802154: add basic support for RF212 to at86rf230 driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=8fad346f366a7;p=linux-beck.git ieee802154: add basic support for RF212 to at86rf230 driver Since the AT86RF2xy chips are mostly compatible, this is only a small change to the actual driver code. The at86rf230 driver already supports the RF212 in most places, only three small adjustments are required: * force the initial state after P_ON to FORCE_TRX_OFF to work around a documented erratum * channels_supported depends on the frequency of the transceiver, and thus is_rf212 * do early detection of chip version select an appropriate _ops struct based on the chip version. Signed-off-by: Phoebe Buckheister Signed-off-by: David S. Miller --- diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index ab31544bc254..6dd97829ff08 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -37,7 +37,6 @@ struct at86rf230_local { struct spi_device *spi; - int rstn, slp_tr, dig2; u8 part; u8 vers; @@ -55,6 +54,11 @@ struct at86rf230_local { bool is_tx; }; +static inline int is_rf212(struct at86rf230_local *local) +{ + return local->part == 7; +} + #define RG_TRX_STATUS (0x01) #define SR_TRX_STATUS 0x01, 0x1f, 0 #define SR_RESERVED_01_3 0x01, 0x20, 5 @@ -100,7 +104,9 @@ struct at86rf230_local { #define SR_SFD_VALUE 0x0b, 0xff, 0 #define RG_TRX_CTRL_2 (0x0c) #define SR_OQPSK_DATA_RATE 0x0c, 0x03, 0 -#define SR_RESERVED_0c_2 0x0c, 0x7c, 2 +#define SR_SUB_MODE 0x0c, 0x04, 2 +#define SR_BPSK_QPSK 0x0c, 0x08, 3 +#define SR_RESERVED_0c_4 0x0c, 0x70, 4 #define SR_RX_SAFE_MODE 0x0c, 0x80, 7 #define RG_ANT_DIV (0x0d) #define SR_ANT_CTRL 0x0d, 0x03, 0 @@ -243,6 +249,57 @@ struct at86rf230_local { #define STATE_BUSY_RX_AACK_NOCLK 0x1E #define STATE_TRANSITION_IN_PROGRESS 0x1F +static int +__at86rf230_detect_device(struct spi_device *spi, u16 *man_id, u8 *part, + u8 *version) +{ + u8 data[4]; + u8 *buf = kmalloc(2, GFP_KERNEL); + int status; + struct spi_message msg; + struct spi_transfer xfer = { + .len = 2, + .tx_buf = buf, + .rx_buf = buf, + }; + u8 reg; + + if (!buf) + return -ENOMEM; + + for (reg = RG_PART_NUM; reg <= RG_MAN_ID_1; reg++) { + buf[0] = (reg & CMD_REG_MASK) | CMD_REG; + buf[1] = 0xff; + dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]); + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + status = spi_sync(spi, &msg); + dev_vdbg(&spi->dev, "status = %d\n", status); + if (msg.status) + status = msg.status; + + dev_vdbg(&spi->dev, "status = %d\n", status); + dev_vdbg(&spi->dev, "buf[0] = %02x\n", buf[0]); + dev_vdbg(&spi->dev, "buf[1] = %02x\n", buf[1]); + + if (status == 0) + data[reg - RG_PART_NUM] = buf[1]; + else + break; + } + + if (status == 0) { + *part = data[0]; + *version = data[1]; + *man_id = (data[3] << 8) | data[2]; + } + + kfree(buf); + + return status; +} + static int __at86rf230_write(struct at86rf230_local *lp, u8 addr, u8 data) { @@ -519,6 +576,27 @@ at86rf230_stop(struct ieee802154_dev *dev) at86rf230_state(dev, STATE_FORCE_TRX_OFF); } +static int +at86rf230_set_channel(struct at86rf230_local *lp, int page, int channel) +{ + return at86rf230_write_subreg(lp, SR_CHANNEL, channel); +} + +static int +at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel) +{ + int rc; + + if (channel == 0) + rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 0); + else + rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 1); + if (rc < 0) + return rc; + + return at86rf230_write_subreg(lp, SR_CHANNEL, channel); +} + static int at86rf230_channel(struct ieee802154_dev *dev, int page, int channel) { @@ -527,12 +605,19 @@ at86rf230_channel(struct ieee802154_dev *dev, int page, int channel) might_sleep(); - if (page != 0 || channel < 11 || channel > 26) { + if (page < 0 || page > 31 || + !(lp->dev->phy->channels_supported[page] & BIT(channel))) { WARN_ON(1); return -EINVAL; } - rc = at86rf230_write_subreg(lp, SR_CHANNEL, channel); + if (is_rf212(lp)) + rc = at86rf212_set_channel(lp, page, channel); + else + rc = at86rf230_set_channel(lp, page, channel); + if (rc < 0) + return rc; + msleep(1); /* Wait for PLL */ dev->phy->current_channel = channel; @@ -678,6 +763,16 @@ static struct ieee802154_ops at86rf230_ops = { .set_hw_addr_filt = at86rf230_set_hw_addr_filt, }; +static struct ieee802154_ops at86rf212_ops = { + .owner = THIS_MODULE, + .xmit = at86rf230_xmit, + .ed = at86rf230_ed, + .set_channel = at86rf230_channel, + .start = at86rf230_start, + .stop = at86rf230_stop, + .set_hw_addr_filt = at86rf230_set_hw_addr_filt, +}; + static void at86rf230_irqwork(struct work_struct *work) { struct at86rf230_local *lp = @@ -759,7 +854,8 @@ static int at86rf230_hw_init(struct at86rf230_local *lp) dev_info(&lp->spi->dev, "Status: %02x\n", status); if (status == STATE_P_ON) { - rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TRX_OFF); + rc = at86rf230_write_subreg(lp, SR_TRX_CMD, + STATE_FORCE_TRX_OFF); if (rc) return rc; msleep(1); @@ -824,26 +920,18 @@ static int at86rf230_hw_init(struct at86rf230_local *lp) return 0; } -static void at86rf230_fill_data(struct spi_device *spi) -{ - struct at86rf230_local *lp = spi_get_drvdata(spi); - struct at86rf230_platform_data *pdata = spi->dev.platform_data; - - lp->rstn = pdata->rstn; - lp->slp_tr = pdata->slp_tr; - lp->dig2 = pdata->dig2; -} - static int at86rf230_probe(struct spi_device *spi) { struct at86rf230_platform_data *pdata; struct ieee802154_dev *dev; struct at86rf230_local *lp; - u8 man_id_0, man_id_1, status; + u16 man_id = 0; + u8 part = 0, version = 0, status; irq_handler_t irq_handler; work_func_t irq_worker; - int rc, supported = 0; + int rc; const char *chip; + struct ieee802154_ops *ops = NULL; if (!spi->irq) { dev_err(&spi->dev, "no IRQ specified\n"); @@ -856,116 +944,115 @@ static int at86rf230_probe(struct spi_device *spi) return -EINVAL; } - dev = ieee802154_alloc_device(sizeof(*lp), &at86rf230_ops); - if (!dev) - return -ENOMEM; - - lp = dev->priv; - lp->dev = dev; - - lp->spi = spi; - - dev->parent = &spi->dev; - dev->extra_tx_headroom = 0; - /* We do support only 2.4 Ghz */ - dev->phy->channels_supported[0] = 0x7FFF800; - dev->flags = IEEE802154_HW_OMIT_CKSUM; - - if (pdata->irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { - irq_worker = at86rf230_irqwork; - irq_handler = at86rf230_isr; - } else { - irq_worker = at86rf230_irqwork_level; - irq_handler = at86rf230_isr_level; - } - - mutex_init(&lp->bmux); - INIT_WORK(&lp->irqwork, irq_worker); - spin_lock_init(&lp->lock); - init_completion(&lp->tx_complete); - - spi_set_drvdata(spi, lp); - - at86rf230_fill_data(spi); - - rc = gpio_request(lp->rstn, "rstn"); + rc = gpio_request(pdata->rstn, "rstn"); if (rc) - goto err_rstn; + return rc; - if (gpio_is_valid(lp->slp_tr)) { - rc = gpio_request(lp->slp_tr, "slp_tr"); + if (gpio_is_valid(pdata->slp_tr)) { + rc = gpio_request(pdata->slp_tr, "slp_tr"); if (rc) goto err_slp_tr; } - rc = gpio_direction_output(lp->rstn, 1); + rc = gpio_direction_output(pdata->rstn, 1); if (rc) goto err_gpio_dir; - if (gpio_is_valid(lp->slp_tr)) { - rc = gpio_direction_output(lp->slp_tr, 0); + if (gpio_is_valid(pdata->slp_tr)) { + rc = gpio_direction_output(pdata->slp_tr, 0); if (rc) goto err_gpio_dir; } /* Reset */ msleep(1); - gpio_set_value(lp->rstn, 0); + gpio_set_value(pdata->rstn, 0); msleep(1); - gpio_set_value(lp->rstn, 1); + gpio_set_value(pdata->rstn, 1); msleep(1); - rc = at86rf230_read_subreg(lp, SR_MAN_ID_0, &man_id_0); - if (rc) - goto err_gpio_dir; - rc = at86rf230_read_subreg(lp, SR_MAN_ID_1, &man_id_1); - if (rc) + rc = __at86rf230_detect_device(spi, &man_id, &part, &version); + if (rc < 0) goto err_gpio_dir; - if (man_id_1 != 0x00 || man_id_0 != 0x1f) { + if (man_id != 0x001f) { dev_err(&spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n", - man_id_1, man_id_0); + man_id >> 8, man_id & 0xFF); rc = -EINVAL; goto err_gpio_dir; } - rc = at86rf230_read_subreg(lp, SR_PART_NUM, &lp->part); - if (rc) - goto err_gpio_dir; - - rc = at86rf230_read_subreg(lp, SR_VERSION_NUM, &lp->vers); - if (rc) - goto err_gpio_dir; - - switch (lp->part) { + switch (part) { case 2: chip = "at86rf230"; - /* supported = 1; FIXME: should be easy to support; */ + /* FIXME: should be easy to support; */ break; case 3: chip = "at86rf231"; - supported = 1; + ops = &at86rf230_ops; + break; + case 7: + chip = "at86rf212"; + if (version == 1) + ops = &at86rf212_ops; break; default: chip = "UNKNOWN"; break; } - dev_info(&spi->dev, "Detected %s chip version %d\n", chip, lp->vers); - if (!supported) { + dev_info(&spi->dev, "Detected %s chip version %d\n", chip, version); + if (!ops) { rc = -ENOTSUPP; goto err_gpio_dir; } + dev = ieee802154_alloc_device(sizeof(*lp), ops); + if (!dev) { + rc = -ENOMEM; + goto err_gpio_dir; + } + + lp = dev->priv; + lp->dev = dev; + lp->part = part; + lp->vers = version; + + lp->spi = spi; + + dev->parent = &spi->dev; + dev->extra_tx_headroom = 0; + dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK; + + if (pdata->irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { + irq_worker = at86rf230_irqwork; + irq_handler = at86rf230_isr; + } else { + irq_worker = at86rf230_irqwork_level; + irq_handler = at86rf230_isr_level; + } + + mutex_init(&lp->bmux); + INIT_WORK(&lp->irqwork, irq_worker); + spin_lock_init(&lp->lock); + init_completion(&lp->tx_complete); + + spi_set_drvdata(spi, lp); + + if (is_rf212(lp)) + dev->phy->channels_supported[0] = 0x00007FF; + else + dev->phy->channels_supported[0] = 0x7FFF800; + rc = at86rf230_hw_init(lp); if (rc) - goto err_gpio_dir; + goto err_hw_init; rc = request_irq(spi->irq, irq_handler, IRQF_SHARED | pdata->irq_type, dev_name(&spi->dev), lp); if (rc) - goto err_gpio_dir; + goto err_hw_init; /* Read irq status register to reset irq line */ rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status); @@ -980,30 +1067,33 @@ static int at86rf230_probe(struct spi_device *spi) err_irq: free_irq(spi->irq, lp); +err_hw_init: flush_work(&lp->irqwork); -err_gpio_dir: - if (gpio_is_valid(lp->slp_tr)) - gpio_free(lp->slp_tr); -err_slp_tr: - gpio_free(lp->rstn); -err_rstn: + spi_set_drvdata(spi, NULL); mutex_destroy(&lp->bmux); ieee802154_free_device(lp->dev); + +err_gpio_dir: + if (gpio_is_valid(pdata->slp_tr)) + gpio_free(pdata->slp_tr); +err_slp_tr: + gpio_free(pdata->rstn); return rc; } static int at86rf230_remove(struct spi_device *spi) { struct at86rf230_local *lp = spi_get_drvdata(spi); + struct at86rf230_platform_data *pdata = spi->dev.platform_data; ieee802154_unregister_device(lp->dev); free_irq(spi->irq, lp); flush_work(&lp->irqwork); - if (gpio_is_valid(lp->slp_tr)) - gpio_free(lp->slp_tr); - gpio_free(lp->rstn); + if (gpio_is_valid(pdata->slp_tr)) + gpio_free(pdata->slp_tr); + gpio_free(pdata->rstn); mutex_destroy(&lp->bmux); ieee802154_free_device(lp->dev);