From: Alexander Shiyan Date: Sat, 17 Nov 2012 13:57:17 +0000 (+0400) Subject: ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=90383e0ac2ae3df283f2b56997040f71f6d1df08;p=linux-beck.git ARM: clps711x: autcpu12: Special driver for handling NAND memory is removed This patch provide migration to using "gpio-nand" and "basic-mmio-gpio" drivers instead of using special driver for handling NAND memory. Signed-off-by: Alexander Shiyan Signed-off-by: Olof Johansson --- diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 3de19554d800..3fbf43f72589 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -23,9 +23,13 @@ #include #include #include +#include #include #include +#include +#include #include +#include #include #include @@ -43,6 +47,15 @@ #define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) #define AUTCPU12_CS8900_IRQ (IRQ_EINT3) +#define AUTCPU12_SMC_BASE (CS1_PHYS_BASE + 0x06000000) +#define AUTCPU12_SMC_SEL_BASE (AUTCPU12_SMC_BASE + 0x10) + +#define AUTCPU12_MMGPIO_BASE (CLPS711X_NR_GPIO) +#define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ +#define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) +#define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) +#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 3) + static struct resource autcpu12_cs8900_resource[] __initdata = { DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K), DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ), @@ -59,14 +72,98 @@ static struct platform_device autcpu12_nvram_pdev __initdata = { .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), }; +static struct resource autcpu12_nand_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16), +}; + +static struct mtd_partition autcpu12_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_8M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata, + size_t sz) +{ + switch (sz) { + case SZ_16M: + case SZ_32M: + break; + case SZ_64M: + case SZ_128M: + pdata->parts[0].size = SZ_16M; + break; + default: + pr_warn("Unsupported SmartMedia device size %u\n", sz); + break; + } +} + +static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = { + .gpio_rdy = AUTCPU12_SMC_RDY, + .gpio_nce = AUTCPU12_SMC_NCE, + .gpio_ale = AUTCPU12_SMC_ALE, + .gpio_cle = AUTCPU12_SMC_CLE, + .gpio_nwp = -1, + .chip_delay = 20, + .parts = autcpu12_nand_parts, + .num_parts = ARRAY_SIZE(autcpu12_nand_parts), + .adjust_parts = autcpu12_adjust_parts, +}; + +static struct platform_device autcpu12_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = autcpu12_nand_resource, + .num_resources = ARRAY_SIZE(autcpu12_nand_resource), + .dev = { + .platform_data = &autcpu12_nand_pdata, + }, +}; + +static struct resource autcpu12_mmgpio_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"), +}; + +static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = { + .base = AUTCPU12_MMGPIO_BASE, + .ngpio = 8, +}; + +static struct platform_device autcpu12_mmgpio_pdev __initdata = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = autcpu12_mmgpio_resource, + .num_resources = ARRAY_SIZE(autcpu12_mmgpio_resource), + .dev = { + .platform_data = &autcpu12_mmgpio_pdata, + }, +}; + static void __init autcpu12_init(void) { platform_device_register_simple("video-clps711x", 0, NULL, 0); platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, ARRAY_SIZE(autcpu12_cs8900_resource)); + platform_device_register(&autcpu12_mmgpio_pdev); platform_device_register(&autcpu12_nvram_pdev); } +static void __init autcpu12_init_late(void) +{ + if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) { + /* We are need both drivers to handle NAND */ + platform_device_register(&autcpu12_nand_pdev); + } +} + MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ .atag_offset = 0x20000, @@ -75,6 +172,7 @@ MACHINE_START(AUTCPU12, "autronix autcpu12") .init_irq = clps711x_init_irq, .timer = &clps711x_timer, .init_machine = autcpu12_init, + .init_late = autcpu12_init_late, .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h index b077abd8a475..0452f5f3f034 100644 --- a/arch/arm/mach-clps711x/include/mach/autcpu12.h +++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h @@ -40,8 +40,6 @@ #define AUTCPU12_PHYS_CSAUX1 CS1_PHYS_BASE +0x04000000 /* physical */ -#define AUTCPU12_PHYS_SMC CS1_PHYS_BASE +0x06000000 /* physical */ - #define AUTCPU12_PHYS_CAN CS1_PHYS_BASE +0x08000000 /* physical */ #define AUTCPU12_PHYS_TOUCH CS1_PHYS_BASE +0x0A000000 /* physical */ @@ -50,14 +48,6 @@ #define AUTCPU12_PHYS_LPT CS1_PHYS_BASE +0x0E000000 /* physical */ -/* -* defines for smartmedia card access -*/ -#define AUTCPU12_SMC_RDY (1<<2) -#define AUTCPU12_SMC_ALE (1<<3) -#define AUTCPU12_SMC_CLE (1<<4) -#define AUTCPU12_SMC_PORT_OFFSET PBDR -#define AUTCPU12_SMC_SELECT_OFFSET 0x10 /* * defines for lcd contrast */ diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 4883139460be..e6e0a82cbaaf 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -49,13 +49,6 @@ config MTD_NAND_MUSEUM_IDS NAND chips (page size 256 byte, erase size 4-8KiB). The IDs of these chips were reused by later, larger chips. -config MTD_NAND_AUTCPU12 - tristate "SmartMediaCard on autronix autcpu12 board" - depends on ARCH_AUTCPU12 - help - This enables the driver for the autronix autcpu12 board to - access the SmartMediaCard. - config MTD_NAND_DENALI depends on PCI tristate "Support Denali NAND controller on Intel Moorestown" diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 2cbd0916b733..0b1fca24866c 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_MTD_SM_COMMON) += sm_common.o obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o obj-$(CONFIG_MTD_NAND_SPIA) += spia.o obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o -obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o obj-$(CONFIG_MTD_NAND_DENALI) += denali.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c deleted file mode 100644 index 04769a49a7cb..000000000000 --- a/drivers/mtd/nand/autcpu12.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * drivers/mtd/autcpu12.c - * - * Copyright (c) 2002 Thomas Gleixner - * - * Derived from drivers/mtd/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the NAND flash device found on the - * autronix autcpu12 board, which is a SmartMediaCard. It supports - * 16MiB, 32MiB and 64MiB cards. - * - * - * 02-12-2002 TG Cleanup of module params - * - * 02-20-2002 TG adjusted for different rd/wr address support - * added support for read device ready/busy line - * added page_cache - * - * 10-06-2002 TG 128K card support added - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * MTD structure for AUTCPU12 board - */ -static struct mtd_info *autcpu12_mtd = NULL; -static void __iomem *autcpu12_fio_base; - -/* - * Define partitions for flash devices - */ -static struct mtd_partition partition_info16k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 8 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 8 * SZ_1M, - .size = 8 * SZ_1M }, -}; - -static struct mtd_partition partition_info32k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 8 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 8 * SZ_1M, - .size = 24 * SZ_1M }, -}; - -static struct mtd_partition partition_info64k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 16 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 16 * SZ_1M, - .size = 48 * SZ_1M }, -}; - -static struct mtd_partition partition_info128k[] = { - { .name = "AUTCPU12 flash partition 1", - .offset = 0, - .size = 16 * SZ_1M }, - { .name = "AUTCPU12 flash partition 2", - .offset = 16 * SZ_1M, - .size = 112 * SZ_1M }, -}; - -#define NUM_PARTITIONS16K 2 -#define NUM_PARTITIONS32K 2 -#define NUM_PARTITIONS64K 2 -#define NUM_PARTITIONS128K 2 -/* - * hardware specific access to control-lines - * - * ALE bit 4 autcpu12_pedr - * CLE bit 5 autcpu12_pedr - * NCE bit 0 fio_ctrl - * - */ -static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr; - unsigned char bits; - - bits = clps_readb(AUTCPU12_SMC_PORT_OFFSET) & ~0x30; - bits |= (ctrl & NAND_CLE) << 4; - bits |= (ctrl & NAND_ALE) << 2; - clps_writeb(bits, AUTCPU12_SMC_PORT_OFFSET); - - addr = autcpu12_fio_base + AUTCPU12_SMC_SELECT_OFFSET; - writeb((readb(addr) & ~0x1) | (ctrl & NAND_NCE), addr); - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -/* - * read device ready pin - */ -int autcpu12_device_ready(struct mtd_info *mtd) -{ - return clps_readb(AUTCPU12_SMC_PORT_OFFSET) & AUTCPU12_SMC_RDY; -} - -/* - * Main initialization routine - */ -static int __init autcpu12_init(void) -{ - struct nand_chip *this; - int err = 0; - - /* Allocate memory for MTD device structure and private data */ - autcpu12_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), - GFP_KERNEL); - if (!autcpu12_mtd) { - printk("Unable to allocate AUTCPU12 NAND MTD device structure.\n"); - err = -ENOMEM; - goto out; - } - - /* map physical address */ - autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K); - if (!autcpu12_fio_base) { - printk("Ioremap autcpu12 SmartMedia Card failed\n"); - err = -EIO; - goto out_mtd; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&autcpu12_mtd[1]); - - /* Initialize structures */ - memset(autcpu12_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - autcpu12_mtd->priv = this; - autcpu12_mtd->owner = THIS_MODULE; - - /* Set address of NAND IO lines */ - this->IO_ADDR_R = autcpu12_fio_base; - this->IO_ADDR_W = autcpu12_fio_base; - this->cmd_ctrl = autcpu12_hwcontrol; - this->dev_ready = autcpu12_device_ready; - /* 20 us command delay time */ - this->chip_delay = 20; - this->ecc.mode = NAND_ECC_SOFT; - - /* Enable the following for a flash based bad block table */ - /* - this->bbt_options = NAND_BBT_USE_FLASH; - */ - this->bbt_options = NAND_BBT_USE_FLASH; - - /* Scan to find existence of the device */ - if (nand_scan(autcpu12_mtd, 1)) { - err = -ENXIO; - goto out_ior; - } - - /* Register the partitions */ - switch (autcpu12_mtd->size) { - case SZ_16M: - mtd_device_register(autcpu12_mtd, partition_info16k, - NUM_PARTITIONS16K); - break; - case SZ_32M: - mtd_device_register(autcpu12_mtd, partition_info32k, - NUM_PARTITIONS32K); - break; - case SZ_64M: - mtd_device_register(autcpu12_mtd, partition_info64k, - NUM_PARTITIONS64K); - break; - case SZ_128M: - mtd_device_register(autcpu12_mtd, partition_info128k, - NUM_PARTITIONS128K); - break; - default: - printk("Unsupported SmartMedia device\n"); - err = -ENXIO; - goto out_ior; - } - goto out; - - out_ior: - iounmap(autcpu12_fio_base); - out_mtd: - kfree(autcpu12_mtd); - out: - return err; -} - -module_init(autcpu12_init); - -/* - * Clean up routine - */ -static void __exit autcpu12_cleanup(void) -{ - /* Release resources, unregister device */ - nand_release(autcpu12_mtd); - - /* unmap physical address */ - iounmap(autcpu12_fio_base); - - /* Free the MTD device structure */ - kfree(autcpu12_mtd); -} - -module_exit(autcpu12_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Thomas Gleixner "); -MODULE_DESCRIPTION("Glue layer for SmartMediaCard on autronix autcpu12");