From: Hans de Goede Date: Sat, 22 Feb 2014 15:53:37 +0000 (+0100) Subject: ahci-imx: Port to library-ised ahci_platform X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=90870d79d4f2;p=linux-beck.git ahci-imx: Port to library-ised ahci_platform This avoids the ugliness of creating a nested platform device from probe. While moving it around anyways, move the mk6q phy init code from probe to imx_sata_enable, as the phy needs to be re-initialized on resume too, otherwise the drive won't be recognized after resume. Tested on a wandboard i.mx6 quad. Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo --- diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 499bfed81054..d86e85403657 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -5,8 +5,9 @@ Each SATA controller should have its own node. Required properties: - compatible : compatible list, one of "snps,spear-ahci", - "snps,exynos5440-ahci", "ibm,476gtr-ahci", or - "allwinner,sun4i-a10-ahci" + "snps,exynos5440-ahci", "ibm,476gtr-ahci", + "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci" or + "fsl,imx6q-ahci" - interrupts : - reg : @@ -15,6 +16,10 @@ Optional properties: - clocks : a list of phandle + clock specifier pairs - target-supply : regulator for SATA target power +"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties: +- clocks : must contain the sata, sata_ref and ahb clocks +- clock-names : must contain "ahb" for the ahb clock + Examples: sata@ffe08000 { compatible = "snps,spear-ahci"; diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c index dd4d6f74d7bd..3cb5d69581f1 100644 --- a/drivers/ata/ahci_imx.c +++ b/drivers/ata/ahci_imx.c @@ -42,13 +42,7 @@ enum ahci_imx_type { struct imx_ahci_priv { struct platform_device *ahci_pdev; enum ahci_imx_type type; - - /* i.MX53 clock */ - struct clk *sata_gate_clk; - /* Common clock */ - struct clk *sata_ref_clk; struct clk *ahb_clk; - struct regmap *gpr; bool no_device; bool first_time; @@ -58,28 +52,52 @@ static int ahci_imx_hotplug; module_param_named(hotplug, ahci_imx_hotplug, int, 0644); MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)"); -static int imx_sata_clock_enable(struct device *dev) +static void ahci_imx_host_stop(struct ata_host *host); + +static int imx_sata_enable(struct ahci_host_priv *hpriv) { - struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); + struct imx_ahci_priv *imxpriv = hpriv->plat_data; int ret; - if (imxpriv->type == AHCI_IMX53) { - ret = clk_prepare_enable(imxpriv->sata_gate_clk); - if (ret < 0) { - dev_err(dev, "prepare-enable sata_gate clock err:%d\n", - ret); + if (imxpriv->no_device) + return 0; + + if (hpriv->target_pwr) { + ret = regulator_enable(hpriv->target_pwr); + if (ret) return ret; - } } - ret = clk_prepare_enable(imxpriv->sata_ref_clk); - if (ret < 0) { - dev_err(dev, "prepare-enable sata_ref clock err:%d\n", - ret); - goto clk_err; - } + ret = ahci_platform_enable_clks(hpriv); + if (ret < 0) + goto disable_regulator; if (imxpriv->type == AHCI_IMX6Q) { + /* + * set PHY Paremeters, two steps to configure the GPR13, + * one write for rest of parameters, mask of first write + * is 0x07ffffff, and the other one write for setting + * the mpll_clk_en. + */ + regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, + IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK | + IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK | + IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK | + IMX6Q_GPR13_SATA_SPD_MODE_MASK | + IMX6Q_GPR13_SATA_MPLL_SS_EN | + IMX6Q_GPR13_SATA_TX_ATTEN_MASK | + IMX6Q_GPR13_SATA_TX_BOOST_MASK | + IMX6Q_GPR13_SATA_TX_LVL_MASK | + IMX6Q_GPR13_SATA_MPLL_CLK_EN | + IMX6Q_GPR13_SATA_TX_EDGE_RATE, + IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB | + IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M | + IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F | + IMX6Q_GPR13_SATA_SPD_MODE_3P0G | + IMX6Q_GPR13_SATA_MPLL_SS_EN | + IMX6Q_GPR13_SATA_TX_ATTEN_9_16 | + IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB | + IMX6Q_GPR13_SATA_TX_LVL_1_025_V); regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, IMX6Q_GPR13_SATA_MPLL_CLK_EN, IMX6Q_GPR13_SATA_MPLL_CLK_EN); @@ -89,15 +107,19 @@ static int imx_sata_clock_enable(struct device *dev) return 0; -clk_err: - if (imxpriv->type == AHCI_IMX53) - clk_disable_unprepare(imxpriv->sata_gate_clk); +disable_regulator: + if (hpriv->target_pwr) + regulator_disable(hpriv->target_pwr); + return ret; } -static void imx_sata_clock_disable(struct device *dev) +static void imx_sata_disable(struct ahci_host_priv *hpriv) { - struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); + struct imx_ahci_priv *imxpriv = hpriv->plat_data; + + if (imxpriv->no_device) + return; if (imxpriv->type == AHCI_IMX6Q) { regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, @@ -105,10 +127,10 @@ static void imx_sata_clock_disable(struct device *dev) !IMX6Q_GPR13_SATA_MPLL_CLK_EN); } - clk_disable_unprepare(imxpriv->sata_ref_clk); + ahci_platform_disable_clks(hpriv); - if (imxpriv->type == AHCI_IMX53) - clk_disable_unprepare(imxpriv->sata_gate_clk); + if (hpriv->target_pwr) + regulator_disable(hpriv->target_pwr); } static void ahci_imx_error_handler(struct ata_port *ap) @@ -118,7 +140,7 @@ static void ahci_imx_error_handler(struct ata_port *ap) struct ata_host *host = dev_get_drvdata(ap->dev); struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = hpriv->mmio; - struct imx_ahci_priv *imxpriv = dev_get_drvdata(ap->dev->parent); + struct imx_ahci_priv *imxpriv = hpriv->plat_data; ahci_error_handler(ap); @@ -136,7 +158,7 @@ static void ahci_imx_error_handler(struct ata_port *ap) */ reg_val = readl(mmio + PORT_PHY_CTL); writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL); - imx_sata_clock_disable(ap->dev); + imx_sata_disable(hpriv); imxpriv->no_device = true; } @@ -144,7 +166,9 @@ static int ahci_imx_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { struct ata_port *ap = link->ap; - struct imx_ahci_priv *imxpriv = dev_get_drvdata(ap->dev->parent); + struct ata_host *host = dev_get_drvdata(ap->dev); + struct ahci_host_priv *hpriv = host->private_data; + struct imx_ahci_priv *imxpriv = hpriv->plat_data; int ret = -EIO; if (imxpriv->type == AHCI_IMX53) @@ -156,7 +180,8 @@ static int ahci_imx_softreset(struct ata_link *link, unsigned int *class, } static struct ata_port_operations ahci_imx_ops = { - .inherits = &ahci_platform_ops, + .inherits = &ahci_ops, + .host_stop = ahci_imx_host_stop, .error_handler = ahci_imx_error_handler, .softreset = ahci_imx_softreset, }; @@ -168,79 +193,6 @@ static const struct ata_port_info ahci_imx_port_info = { .port_ops = &ahci_imx_ops, }; -static int imx_sata_init(struct device *dev, void __iomem *mmio) -{ - int ret = 0; - unsigned int reg_val; - struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); - - ret = imx_sata_clock_enable(dev); - if (ret < 0) - return ret; - - /* - * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, - * and IP vendor specific register HOST_TIMER1MS. - * Configure CAP_SSS (support stagered spin up). - * Implement the port0. - * Get the ahb clock rate, and configure the TIMER1MS register. - */ - reg_val = readl(mmio + HOST_CAP); - if (!(reg_val & HOST_CAP_SSS)) { - reg_val |= HOST_CAP_SSS; - writel(reg_val, mmio + HOST_CAP); - } - reg_val = readl(mmio + HOST_PORTS_IMPL); - if (!(reg_val & 0x1)) { - reg_val |= 0x1; - writel(reg_val, mmio + HOST_PORTS_IMPL); - } - - reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; - writel(reg_val, mmio + HOST_TIMER1MS); - - return 0; -} - -static void imx_sata_exit(struct device *dev) -{ - imx_sata_clock_disable(dev); -} - -static int imx_ahci_suspend(struct device *dev) -{ - struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); - - /* - * If no_device is set, The CLKs had been gated off in the - * initialization so don't do it again here. - */ - if (!imxpriv->no_device) - imx_sata_clock_disable(dev); - - return 0; -} - -static int imx_ahci_resume(struct device *dev) -{ - struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent); - int ret = 0; - - if (!imxpriv->no_device) - ret = imx_sata_clock_enable(dev); - - return ret; -} - -static struct ahci_platform_data imx_sata_pdata = { - .init = imx_sata_init, - .exit = imx_sata_exit, - .ata_port_info = &ahci_imx_port_info, - .suspend = imx_ahci_suspend, - .resume = imx_ahci_resume, - -}; - static const struct of_device_id imx_ahci_of_match[] = { { .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 }, { .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q }, @@ -251,151 +203,122 @@ MODULE_DEVICE_TABLE(of, imx_ahci_of_match); static int imx_ahci_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *mem, *irq, res[2]; const struct of_device_id *of_id; - enum ahci_imx_type type; - const struct ahci_platform_data *pdata = NULL; + struct ahci_host_priv *hpriv; struct imx_ahci_priv *imxpriv; - struct device *ahci_dev; - struct platform_device *ahci_pdev; + unsigned int reg_val; int ret; of_id = of_match_device(imx_ahci_of_match, dev); if (!of_id) return -EINVAL; - type = (enum ahci_imx_type)of_id->data; - pdata = &imx_sata_pdata; - imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL); - if (!imxpriv) { - dev_err(dev, "can't alloc ahci_host_priv\n"); + if (!imxpriv) return -ENOMEM; - } - - ahci_pdev = platform_device_alloc("ahci", -1); - if (!ahci_pdev) - return -ENODEV; - - ahci_dev = &ahci_pdev->dev; - ahci_dev->parent = dev; imxpriv->no_device = false; imxpriv->first_time = true; - imxpriv->type = type; - + imxpriv->type = (enum ahci_imx_type)of_id->data; imxpriv->ahb_clk = devm_clk_get(dev, "ahb"); if (IS_ERR(imxpriv->ahb_clk)) { dev_err(dev, "can't get ahb clock.\n"); - ret = PTR_ERR(imxpriv->ahb_clk); - goto err_out; + return PTR_ERR(imxpriv->ahb_clk); } - if (type == AHCI_IMX53) { - imxpriv->sata_gate_clk = devm_clk_get(dev, "sata_gate"); - if (IS_ERR(imxpriv->sata_gate_clk)) { - dev_err(dev, "can't get sata_gate clock.\n"); - ret = PTR_ERR(imxpriv->sata_gate_clk); - goto err_out; + if (imxpriv->type == AHCI_IMX6Q) { + imxpriv->gpr = syscon_regmap_lookup_by_compatible( + "fsl,imx6q-iomuxc-gpr"); + if (IS_ERR(imxpriv->gpr)) { + dev_err(dev, + "failed to find fsl,imx6q-iomux-gpr regmap\n"); + return PTR_ERR(imxpriv->gpr); } } - imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref"); - if (IS_ERR(imxpriv->sata_ref_clk)) { - dev_err(dev, "can't get sata_ref clock.\n"); - ret = PTR_ERR(imxpriv->sata_ref_clk); - goto err_out; - } + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + hpriv->plat_data = imxpriv; - imxpriv->ahci_pdev = ahci_pdev; - platform_set_drvdata(pdev, imxpriv); + ret = imx_sata_enable(hpriv); + if (ret) + return ret; - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!mem || !irq) { - dev_err(dev, "no mmio/irq resource\n"); - ret = -ENOMEM; - goto err_out; + /* + * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL, + * and IP vendor specific register HOST_TIMER1MS. + * Configure CAP_SSS (support stagered spin up). + * Implement the port0. + * Get the ahb clock rate, and configure the TIMER1MS register. + */ + reg_val = readl(hpriv->mmio + HOST_CAP); + if (!(reg_val & HOST_CAP_SSS)) { + reg_val |= HOST_CAP_SSS; + writel(reg_val, hpriv->mmio + HOST_CAP); + } + reg_val = readl(hpriv->mmio + HOST_PORTS_IMPL); + if (!(reg_val & 0x1)) { + reg_val |= 0x1; + writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL); } - res[0] = *mem; - res[1] = *irq; + reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000; + writel(reg_val, hpriv->mmio + HOST_TIMER1MS); - ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32); - ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask; - ahci_dev->of_node = dev->of_node; + ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0); + if (ret) + imx_sata_disable(hpriv); - if (type == AHCI_IMX6Q) { - imxpriv->gpr = syscon_regmap_lookup_by_compatible( - "fsl,imx6q-iomuxc-gpr"); - if (IS_ERR(imxpriv->gpr)) { - dev_err(dev, - "failed to find fsl,imx6q-iomux-gpr regmap\n"); - ret = PTR_ERR(imxpriv->gpr); - goto err_out; - } + return ret; +} - /* - * Set PHY Paremeters, two steps to configure the GPR13, - * one write for rest of parameters, mask of first write - * is 0x07fffffe, and the other one write for setting - * the mpll_clk_en happens in imx_sata_clock_enable(). - */ - regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13, - IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK | - IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK | - IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK | - IMX6Q_GPR13_SATA_SPD_MODE_MASK | - IMX6Q_GPR13_SATA_MPLL_SS_EN | - IMX6Q_GPR13_SATA_TX_ATTEN_MASK | - IMX6Q_GPR13_SATA_TX_BOOST_MASK | - IMX6Q_GPR13_SATA_TX_LVL_MASK | - IMX6Q_GPR13_SATA_MPLL_CLK_EN | - IMX6Q_GPR13_SATA_TX_EDGE_RATE, - IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB | - IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M | - IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F | - IMX6Q_GPR13_SATA_SPD_MODE_3P0G | - IMX6Q_GPR13_SATA_MPLL_SS_EN | - IMX6Q_GPR13_SATA_TX_ATTEN_9_16 | - IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB | - IMX6Q_GPR13_SATA_TX_LVL_1_025_V); - } +static void ahci_imx_host_stop(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; - ret = platform_device_add_resources(ahci_pdev, res, 2); - if (ret) - goto err_out; + imx_sata_disable(hpriv); +} - ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata)); - if (ret) - goto err_out; +static int imx_ahci_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int ret; - ret = platform_device_add(ahci_pdev); - if (ret) { -err_out: - platform_device_put(ahci_pdev); + ret = ahci_platform_suspend_host(dev); + if (ret) return ret; - } + + imx_sata_disable(hpriv); return 0; } -static int imx_ahci_remove(struct platform_device *pdev) +static int imx_ahci_resume(struct device *dev) { - struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev); - struct platform_device *ahci_pdev = imxpriv->ahci_pdev; + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + int ret; - platform_device_unregister(ahci_pdev); - return 0; + ret = imx_sata_enable(hpriv); + if (ret) + return ret; + + return ahci_platform_resume_host(dev); } +static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume); + static struct platform_driver imx_ahci_driver = { .probe = imx_ahci_probe, - .remove = imx_ahci_remove, + .remove = ata_platform_remove_one, .driver = { .name = "ahci-imx", .owner = THIS_MODULE, .of_match_table = imx_ahci_of_match, + .pm = &ahci_imx_pm_ops, }, }; module_platform_driver(imx_ahci_driver);