From: Tejun Heo <htejun@gmail.com>
Date: Sun, 2 Apr 2006 08:54:46 +0000 (+0900)
Subject: [PATCH] libata: use SATA speed down in ata_drive_probe_reset()
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=90dac02c08dabd471927f151b8393eb51e3e020e;p=mv-sheeva.git

[PATCH] libata: use SATA speed down in ata_drive_probe_reset()

Make ata_drive_probe_reset() use SATA SPD configuration.  Hardreset
will be force if speed renegotiation is necessary.  Also, if a
hardreset fails, PHY speed is stepped down and hardreset is retried
until the lowest speed is reached.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 63488673765..4fd24075afd 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2578,7 +2578,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
 	if (probeinit)
 		probeinit(ap);
 
-	if (softreset) {
+	if (softreset && !ata_set_sata_spd_needed(ap)) {
 		rc = ata_do_reset(ap, softreset, postreset, 0, classes);
 		if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
 			goto done;
@@ -2587,9 +2587,17 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
 	if (!hardreset)
 		goto done;
 
-	rc = ata_do_reset(ap, hardreset, postreset, 0, classes);
-	if (rc || classes[0] != ATA_DEV_UNKNOWN)
-		goto done;
+	while (1) {
+		rc = ata_do_reset(ap, hardreset, postreset, 0, classes);
+		if (rc == 0) {
+			if (classes[0] != ATA_DEV_UNKNOWN)
+				goto done;
+			break;
+		}
+
+		if (ata_down_sata_spd_limit(ap))
+			goto done;
+	}
 
 	if (softreset)
 		rc = ata_do_reset(ap, softreset, postreset, 0, classes);