From: James Smart Date: Sun, 15 Jun 2008 02:52:38 +0000 (-0400) Subject: [SCSI] lpfc 8.2.7 : Change device reset behavior X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=915caaaf622172bd3451e7b76ba9cfcea80e87c7;p=linux-beck.git [SCSI] lpfc 8.2.7 : Change device reset behavior Prior handler was only waiting for I/O on one lun to finish before returning completion. Now, wait for all LUNs on the target. Also performed some rudimentary cleanup while in this code. Signed-off-by: James Smart Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 0910a9ab76a5..3926affaf727 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -849,14 +849,15 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport, struct lpfc_iocbq *iocbq; struct lpfc_iocbq *iocbqrsp; int ret; + int status; if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode)) return FAILED; lpfc_cmd->rdata = rdata; - ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun, + status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun, FCP_TARGET_RESET); - if (!ret) + if (!status) return FAILED; iocbq = &lpfc_cmd->cur_iocbq; @@ -869,12 +870,15 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport, lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, "0702 Issue Target Reset to TGT %d Data: x%x x%x\n", tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag); - ret = lpfc_sli_issue_iocb_wait(phba, + status = lpfc_sli_issue_iocb_wait(phba, &phba->sli.ring[phba->sli.fcp_ring], iocbq, iocbqrsp, lpfc_cmd->timeout); - if (ret != IOCB_SUCCESS) { - if (ret == IOCB_TIMEDOUT) + if (status != IOCB_SUCCESS) { + if (status == IOCB_TIMEDOUT) { iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl; + ret = TIMEOUT_ERROR; + } else + ret = FAILED; lpfc_cmd->status = IOSTAT_DRIVER_REJECT; } else { ret = SUCCESS; @@ -1142,121 +1146,96 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) struct lpfc_iocbq *iocbq, *iocbqrsp; struct lpfc_rport_data *rdata = cmnd->device->hostdata; struct lpfc_nodelist *pnode = rdata->pnode; - uint32_t cmd_result = 0, cmd_status = 0; - int ret = FAILED; - int iocb_status = IOCB_SUCCESS; - int cnt, loopcnt; + unsigned long later; + int ret = SUCCESS; + int status; + int cnt; lpfc_block_error_handler(cmnd); - loopcnt = 0; /* * If target is not in a MAPPED state, delay the reset until * target is rediscovered or devloss timeout expires. */ - while (1) { + later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies; + while (time_after(later, jiffies)) { if (!pnode || !NLP_CHK_NODE_ACT(pnode)) - goto out; - - if (pnode->nlp_state != NLP_STE_MAPPED_NODE) { - schedule_timeout_uninterruptible(msecs_to_jiffies(500)); - loopcnt++; - rdata = cmnd->device->hostdata; - if (!rdata || - (loopcnt > ((vport->cfg_devloss_tmo * 2) + 1))){ - lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, - "0721 LUN Reset rport " - "failure: cnt x%x rdata x%p\n", - loopcnt, rdata); - goto out; - } - pnode = rdata->pnode; - if (!pnode || !NLP_CHK_NODE_ACT(pnode)) - goto out; - } + return FAILED; if (pnode->nlp_state == NLP_STE_MAPPED_NODE) break; + schedule_timeout_uninterruptible(msecs_to_jiffies(500)); + rdata = cmnd->device->hostdata; + if (!rdata) + break; + pnode = rdata->pnode; + } + if (!rdata || pnode->nlp_state != NLP_STE_MAPPED_NODE) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "0721 LUN Reset rport " + "failure: msec x%x rdata x%p\n", + jiffies_to_msecs(jiffies - later), rdata); + return FAILED; } - lpfc_cmd = lpfc_get_scsi_buf(phba); if (lpfc_cmd == NULL) - goto out; - + return FAILED; lpfc_cmd->timeout = 60; lpfc_cmd->rdata = rdata; - ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, cmnd->device->lun, - FCP_TARGET_RESET); - if (!ret) - goto out_free_scsi_buf; - + status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, + cmnd->device->lun, + FCP_TARGET_RESET); + if (!status) { + lpfc_release_scsi_buf(phba, lpfc_cmd); + return FAILED; + } iocbq = &lpfc_cmd->cur_iocbq; /* get a buffer for this IOCB command response */ iocbqrsp = lpfc_sli_get_iocbq(phba); - if (iocbqrsp == NULL) - goto out_free_scsi_buf; - + if (iocbqrsp == NULL) { + lpfc_release_scsi_buf(phba, lpfc_cmd); + return FAILED; + } lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, "0703 Issue target reset to TGT %d LUN %d " "rpi x%x nlp_flag x%x\n", cmnd->device->id, cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag); - iocb_status = lpfc_sli_issue_iocb_wait(phba, - &phba->sli.ring[phba->sli.fcp_ring], - iocbq, iocbqrsp, lpfc_cmd->timeout); - - if (iocb_status == IOCB_TIMEDOUT) + status = lpfc_sli_issue_iocb_wait(phba, + &phba->sli.ring[phba->sli.fcp_ring], + iocbq, iocbqrsp, lpfc_cmd->timeout); + if (status == IOCB_TIMEDOUT) { iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl; - - if (iocb_status == IOCB_SUCCESS) - ret = SUCCESS; - else - ret = iocb_status; - - cmd_result = iocbqrsp->iocb.un.ulpWord[4]; - cmd_status = iocbqrsp->iocb.ulpStatus; - + ret = TIMEOUT_ERROR; + } else { + if (status != IOCB_SUCCESS) + ret = FAILED; + lpfc_release_scsi_buf(phba, lpfc_cmd); + } + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "0713 SCSI layer issued device reset (%d, %d) " + "return x%x status x%x result x%x\n", + cmnd->device->id, cmnd->device->lun, ret, + iocbqrsp->iocb.ulpStatus, + iocbqrsp->iocb.un.ulpWord[4]); lpfc_sli_release_iocbq(phba, iocbqrsp); - - /* - * All outstanding txcmplq I/Os should have been aborted by the device. - * Unfortunately, some targets do not abide by this forcing the driver - * to double check. - */ cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun, - LPFC_CTX_LUN); + LPFC_CTX_TGT); if (cnt) lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], cmnd->device->id, cmnd->device->lun, - LPFC_CTX_LUN); - loopcnt = 0; - while(cnt) { - schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ); - - if (++loopcnt - > (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT) - break; - + LPFC_CTX_TGT); + later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies; + while (time_after(later, jiffies) && cnt) { + schedule_timeout_uninterruptible(msecs_to_jiffies(20)); cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, - cmnd->device->lun, LPFC_CTX_LUN); + cmnd->device->lun, LPFC_CTX_TGT); } - if (cnt) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "0719 device reset I/O flush failure: " "cnt x%x\n", cnt); ret = FAILED; } - -out_free_scsi_buf: - if (iocb_status != IOCB_TIMEDOUT) { - lpfc_release_scsi_buf(phba, lpfc_cmd); - } - lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, - "0713 SCSI layer issued device reset (%d, %d) " - "return x%x status x%x result x%x\n", - cmnd->device->id, cmnd->device->lun, ret, - cmd_status, cmd_result); -out: return ret; } @@ -1268,19 +1247,12 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) struct lpfc_hba *phba = vport->phba; struct lpfc_nodelist *ndlp = NULL; int match; - int ret = FAILED, i, err_count = 0; - int cnt, loopcnt; + int ret = SUCCESS, status, i; + int cnt; struct lpfc_scsi_buf * lpfc_cmd; + unsigned long later; lpfc_block_error_handler(cmnd); - - lpfc_cmd = lpfc_get_scsi_buf(phba); - if (lpfc_cmd == NULL) - goto out; - - /* The lpfc_cmd storage is reused. Set all loop invariants. */ - lpfc_cmd->timeout = 60; - /* * Since the driver manages a single bus device, reset all * targets known to the driver. Should any target reset @@ -1294,7 +1266,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) if (!NLP_CHK_NODE_ACT(ndlp)) continue; if (ndlp->nlp_state == NLP_STE_MAPPED_NODE && - i == ndlp->nlp_sid && + ndlp->nlp_sid == i && ndlp->rport) { match = 1; break; @@ -1303,27 +1275,22 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) spin_unlock_irq(shost->host_lock); if (!match) continue; - - ret = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i, - cmnd->device->lun, - ndlp->rport->dd_data); - if (ret != SUCCESS) { + lpfc_cmd = lpfc_get_scsi_buf(phba); + if (lpfc_cmd) { + lpfc_cmd->timeout = 60; + status = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i, + cmnd->device->lun, + ndlp->rport->dd_data); + if (status != TIMEOUT_ERROR) + lpfc_release_scsi_buf(phba, lpfc_cmd); + } + if (!lpfc_cmd || status != SUCCESS) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "0700 Bus Reset on target %d failed\n", i); - err_count++; - break; + ret = FAILED; } } - - if (ret != IOCB_TIMEDOUT) - lpfc_release_scsi_buf(phba, lpfc_cmd); - - if (err_count == 0) - ret = SUCCESS; - else - ret = FAILED; - /* * All outstanding txcmplq I/Os should have been aborted by * the targets. Unfortunately, some targets do not abide by @@ -1333,27 +1300,19 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) if (cnt) lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], 0, 0, LPFC_CTX_HOST); - loopcnt = 0; - while(cnt) { - schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ); - - if (++loopcnt - > (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT) - break; - + later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies; + while (time_after(later, jiffies) && cnt) { + schedule_timeout_uninterruptible(msecs_to_jiffies(20)); cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST); } - if (cnt) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "0715 Bus Reset I/O flush failure: " "cnt x%x left x%x\n", cnt, i); ret = FAILED; } - lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "0714 SCSI layer issued Bus Reset Data: x%x\n", ret); -out: return ret; }