From: Jisheng Zhang Date: Fri, 11 Dec 2015 13:36:29 +0000 (+0800) Subject: mmc: sdhci: restore behavior when setting VDD via external regulator X-Git-Tag: v4.5-rc1~155^2~8 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=918f4cbd4340;p=karo-tx-linux.git mmc: sdhci: restore behavior when setting VDD via external regulator After commit 52221610dd84 ("mmc: sdhci: Improve external VDD regulator support"), for the VDD is supplied via external regulators, we ignore the code to convert a VDD voltage request into one of the standard SDHCI voltage levels, then program it in the SDHCI_POWER_CONTROL. This brings two issues: 1. SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON quirk isn't handled properly any more. 2. What's more, once SDHCI_POWER_ON bit is set, some controllers such as the sdhci-pxav3 used in marvell berlin SoCs require the voltage levels programming in the SDHCI_POWER_CONTROL register, even the VDD is supplied by external regulator. So the host in marvell berlin SoCs still works fine after the commit. However, commit 3cbc6123a93d ("mmc: sdhci: Set SDHCI_POWER_ON with external vmmc") sets the SDHCI_POWER_ON bit, this would make the host in marvell berlin SoCs won't work any more with external vmmc. This patch restores the behavior when setting VDD through external regulator by moving the call of mmc_regulator_set_ocr() to the end of sdhci_set_power() function. After this patch, the sdcard on Marvell Berlin SoC boards work again. Signed-off-by: Jisheng Zhang Fixes: 52221610dd84 ("mmc: sdhci: Improve external VDD ...") Reviewed-by: Ludovic Desroches Tested-by: Ludovic Desroches Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 2753b722d1c9..d622435d1bcc 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1275,19 +1275,6 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, struct mmc_host *mmc = host->mmc; u8 pwr = 0; - if (!IS_ERR(mmc->supply.vmmc)) { - spin_unlock_irq(&host->lock); - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); - spin_lock_irq(&host->lock); - - if (mode != MMC_POWER_OFF) - sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL); - else - sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); - - return; - } - if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: @@ -1348,6 +1335,12 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) mdelay(10); } + + if (!IS_ERR(mmc->supply.vmmc)) { + spin_unlock_irq(&host->lock); + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); + spin_lock_irq(&host->lock); + } } /*****************************************************************************\