From: Ville Syrjälä Date: Wed, 9 Apr 2014 10:29:05 +0000 (+0300) Subject: drm/i915/chv: Try to program the PHY used clock channel overrides X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9197c88bf946cf792ad5124f00bd51a0bc18f8c2;p=linux-beck.git drm/i915/chv: Try to program the PHY used clock channel overrides These should make it possible to feed port C from pipe A or port B from pipe B. Didn't quite seem to work though. Signed-off-by: Ville Syrjälä Reviewed-by: Mika Kuoppala Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 53db3a2db3df..fd541fc7d70d 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -771,6 +771,8 @@ enum punit_power_well { #define _VLV_PCS_DW8_CH0 0x8220 #define _VLV_PCS_DW8_CH1 0x8420 +#define CHV_PCS_USEDCLKCHANNEL_OVRRIDE (1 << 20) +#define CHV_PCS_USEDCLKCHANNEL (1 << 21) #define VLV_PCS_DW8(ch) _PORT(ch, _VLV_PCS_DW8_CH0, _VLV_PCS_DW8_CH1) #define _VLV_PCS01_DW8_CH0 0x0220 @@ -895,6 +897,11 @@ enum punit_power_well { #define DPIO_DCLKP_EN (1 << 13) #define CHV_CMN_DW14(ch) _PIPE(ch, _CHV_CMN_DW14_CH0, _CHV_CMN_DW1_CH1) +#define _CHV_CMN_DW19_CH0 0x814c +#define _CHV_CMN_DW6_CH1 0x8098 +#define CHV_CMN_USEDCLKCHANNEL (1 << 13) +#define CHV_CMN_DW19(ch) _PIPE(ch, _CHV_CMN_DW19_CH0, _CHV_CMN_DW6_CH1) + #define CHV_CMN_DW30 0x8178 #define DPIO_LRC_BYPASS (1 << 3) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 82edfbceb1ff..709f049114dd 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2119,6 +2119,51 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder) vlv_wait_port_ready(dev_priv, dport); } +static void chv_dp_pre_pll_enable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel ch = vlv_dport_to_channel(dport); + enum pipe pipe = intel_crtc->pipe; + u32 val; + + mutex_lock(&dev_priv->dpio_lock); + + /* program clock channel usage */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch)); + val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE; + if (pipe != PIPE_B) + val &= ~CHV_PCS_USEDCLKCHANNEL; + else + val |= CHV_PCS_USEDCLKCHANNEL; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch)); + val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE; + if (pipe != PIPE_B) + val &= ~CHV_PCS_USEDCLKCHANNEL; + else + val |= CHV_PCS_USEDCLKCHANNEL; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val); + + /* + * This a a bit weird since generally CL + * matches the pipe, but here we need to + * pick the CL based on the port. + */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch)); + if (pipe != PIPE_B) + val &= ~CHV_CMN_USEDCLKCHANNEL; + else + val |= CHV_CMN_USEDCLKCHANNEL; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val); + + mutex_unlock(&dev_priv->dpio_lock); +} + /* * Native read with retry for link status and receiver capability reads for * cases where the sink may still be asleep. @@ -4335,6 +4380,7 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_encoder->get_hw_state = intel_dp_get_hw_state; intel_encoder->get_config = intel_dp_get_config; if (IS_CHERRYVIEW(dev)) { + intel_encoder->pre_pll_enable = chv_dp_pre_pll_enable; intel_encoder->pre_enable = chv_pre_enable_dp; intel_encoder->enable = vlv_enable_dp; intel_encoder->post_disable = chv_post_disable_dp; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index eee2bbec2958..8da29d158315 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1229,6 +1229,51 @@ static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder) mutex_unlock(&dev_priv->dpio_lock); } +static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel ch = vlv_dport_to_channel(dport); + enum pipe pipe = intel_crtc->pipe; + u32 val; + + mutex_lock(&dev_priv->dpio_lock); + + /* program clock channel usage */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch)); + val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE; + if (pipe != PIPE_B) + val &= ~CHV_PCS_USEDCLKCHANNEL; + else + val |= CHV_PCS_USEDCLKCHANNEL; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch)); + val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE; + if (pipe != PIPE_B) + val &= ~CHV_PCS_USEDCLKCHANNEL; + else + val |= CHV_PCS_USEDCLKCHANNEL; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val); + + /* + * This a a bit weird since generally CL + * matches the pipe, but here we need to + * pick the CL based on the port. + */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch)); + if (pipe != PIPE_B) + val &= ~CHV_CMN_USEDCLKCHANNEL; + else + val |= CHV_CMN_USEDCLKCHANNEL; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val); + + mutex_unlock(&dev_priv->dpio_lock); +} + static void vlv_hdmi_post_disable(struct intel_encoder *encoder) { struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); @@ -1528,6 +1573,7 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port) intel_encoder->get_hw_state = intel_hdmi_get_hw_state; intel_encoder->get_config = intel_hdmi_get_config; if (IS_CHERRYVIEW(dev)) { + intel_encoder->pre_pll_enable = chv_hdmi_pre_pll_enable; intel_encoder->pre_enable = chv_hdmi_pre_enable; intel_encoder->enable = vlv_enable_hdmi; intel_encoder->post_disable = chv_hdmi_post_disable;