From: Amaury Decrême Date: Tue, 29 Jan 2013 20:22:26 +0000 (+0100) Subject: i2c: sis630: checkpatch cleanup X-Git-Tag: next-20130218~82^2~5 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=91991f34d71d4dd1d6333710d1e159db2f95e6e3;p=karo-tx-linux.git i2c: sis630: checkpatch cleanup This patch corrects checkpatch errors. The changes has also been removed as it has less meaning with version control tools. Signed-off-by: Amaury Decrême Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 424545b50970..36a9556d7cfa 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -16,25 +16,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* - Changes: - 24.08.2002 - Fixed the typo in sis630_access (Thanks to Mark M. Hoffman) - Changed sis630_transaction.(Thanks to Mark M. Hoffman) - 18.09.2002 - Added SIS730 as supported. - 21.09.2002 - Added high_clock module option.If this option is set - used Host Master Clock 56KHz (default 14KHz).For now we save old Host - Master Clock and after transaction completed restore (otherwise - it's confuse BIOS and hung Machine). - 24.09.2002 - Fixed typo in sis630_access - Fixed logical error by restoring of Host Master Clock - 31.07.2003 - Added block data read/write support. -*/ - /* Status: beta @@ -150,9 +131,10 @@ static inline void sis630_write(u8 reg, u8 data) outb(data, smbus_base + reg); } -static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldclock) +static int sis630_transaction_start(struct i2c_adapter *adap, int size, + u8 *oldclock) { - int temp; + int temp; /* Make sure the SMBus host is ready to start transmitting. */ temp = sis630_read(SMB_CNT); @@ -165,17 +147,18 @@ static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldc if (temp & (SMB_PROBE | SMB_HOSTBUSY)) { dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); return -EBUSY; - } else { + } else { dev_dbg(&adap->dev, "Successful!\n"); } - } + } /* save old clock, so we can prevent machine for hung */ *oldclock = sis630_read(SMB_CNT); dev_dbg(&adap->dev, "saved clock 0x%02x\n", *oldclock); - /* disable timeout interrupt , set Host Master Clock to 56KHz if requested */ + /* disable timeout interrupt, + * set Host Master Clock to 56KHz if requested */ if (high_clock) sis630_write(SMB_CNT, SMBCLK_SEL); else @@ -228,7 +211,8 @@ static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock) /* clear all status "sticky" bits */ sis630_write(SMB_STS, 0xFF); - dev_dbg(&adap->dev, "SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT)); + dev_dbg(&adap->dev, + "SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT)); /* * restore old Host Master Clock if high_clock is set @@ -237,7 +221,8 @@ static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock) if (high_clock && !(oldclock & SMBCLK_SEL)) sis630_write(SMB_CNT, sis630_read(SMB_CNT) & ~SMBCLK_SEL); - dev_dbg(&adap->dev, "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT)); + dev_dbg(&adap->dev, + "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT)); } static int sis630_transaction(struct i2c_adapter *adap, int size) @@ -254,7 +239,8 @@ static int sis630_transaction(struct i2c_adapter *adap, int size) return result; } -static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *data, int read_write) +static int sis630_block_data(struct i2c_adapter *adap, + union i2c_smbus_data *data, int read_write) { int i, len = 0, rc = 0; u8 oldclock = 0; @@ -266,22 +252,26 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat else if (len > 32) len = 32; sis630_write(SMB_COUNT, len); - for (i=1; i <= len; i++) { - dev_dbg(&adap->dev, "set data 0x%02x\n", data->block[i]); + for (i = 1; i <= len; i++) { + dev_dbg(&adap->dev, + "set data 0x%02x\n", data->block[i]); /* set data */ - sis630_write(SMB_BYTE+(i-1)%8, data->block[i]); - if (i==8 || (len<8 && i==len)) { - dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i); + sis630_write(SMB_BYTE + (i - 1) % 8, data->block[i]); + if (i == 8 || (len < 8 && i == len)) { + dev_dbg(&adap->dev, + "start trans len=%d i=%d\n", len, i); /* first transaction */ rc = sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock); if (rc) return rc; - } - else if ((i-1)%8 == 7 || i==len) { - dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i); - if (i>8) { - dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i); + } else if ((i - 1) % 8 == 7 || i == len) { + dev_dbg(&adap->dev, + "trans_wait len=%d i=%d\n", len, i); + if (i > 8) { + dev_dbg(&adap->dev, + "clear smbary_sts" + " len=%d i=%d\n", len, i); /* If this is not first transaction, we must clear sticky bit. @@ -292,13 +282,13 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat rc = sis630_transaction_wait(adap, SIS630_BLOCK_DATA); if (rc) { - dev_dbg(&adap->dev, "trans_wait failed\n"); + dev_dbg(&adap->dev, + "trans_wait failed\n"); break; } } } - } - else { + } else { /* read request */ data->block[0] = len = 0; rc = sis630_transaction_start(adap, @@ -319,18 +309,22 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat if (data->block[0] > 32) data->block[0] = 32; - dev_dbg(&adap->dev, "block data read len=0x%x\n", data->block[0]); + dev_dbg(&adap->dev, + "block data read len=0x%x\n", data->block[0]); - for (i=0; i < 8 && len < data->block[0]; i++,len++) { - dev_dbg(&adap->dev, "read i=%d len=%d\n", i, len); - data->block[len+1] = sis630_read(SMB_BYTE+i); + for (i = 0; i < 8 && len < data->block[0]; i++, len++) { + dev_dbg(&adap->dev, + "read i=%d len=%d\n", i, len); + data->block[len + 1] = sis630_read(SMB_BYTE + + i); } - dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i); + dev_dbg(&adap->dev, + "clear smbary_sts len=%d i=%d\n", len, i); /* clear SMBARY_STS */ sis630_write(SMB_STS, BYTE_DONE_STS); - } while(len < data->block[0]); + } while (len < data->block[0]); } sis630_transaction_end(adap, oldclock); @@ -346,42 +340,47 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, int status; switch (size) { - case I2C_SMBUS_QUICK: - sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); - size = SIS630_QUICK; - break; - case I2C_SMBUS_BYTE: - sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); - if (read_write == I2C_SMBUS_WRITE) - sis630_write(SMB_CMD, command); - size = SIS630_BYTE; - break; - case I2C_SMBUS_BYTE_DATA: - sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); - sis630_write(SMB_CMD, command); - if (read_write == I2C_SMBUS_WRITE) - sis630_write(SMB_BYTE, data->byte); - size = SIS630_BYTE_DATA; - break; - case I2C_SMBUS_PROC_CALL: - case I2C_SMBUS_WORD_DATA: - sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01)); + case I2C_SMBUS_QUICK: + sis630_write(SMB_ADDR, + ((addr & 0x7f) << 1) | (read_write & 0x01)); + size = SIS630_QUICK; + break; + case I2C_SMBUS_BYTE: + sis630_write(SMB_ADDR, + ((addr & 0x7f) << 1) | (read_write & 0x01)); + if (read_write == I2C_SMBUS_WRITE) sis630_write(SMB_CMD, command); - if (read_write == I2C_SMBUS_WRITE) { - sis630_write(SMB_BYTE, data->word & 0xff); - sis630_write(SMB_BYTE + 1,(data->word & 0xff00) >> 8); - } - size = (size == I2C_SMBUS_PROC_CALL ? SIS630_PCALL : SIS630_WORD_DATA); - break; - case I2C_SMBUS_BLOCK_DATA: - sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01)); - sis630_write(SMB_CMD, command); - size = SIS630_BLOCK_DATA; - return sis630_block_data(adap, data, read_write); - default: - dev_warn(&adap->dev, "Unsupported transaction %d\n", - size); - return -EOPNOTSUPP; + size = SIS630_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + sis630_write(SMB_ADDR, + ((addr & 0x7f) << 1) | (read_write & 0x01)); + sis630_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) + sis630_write(SMB_BYTE, data->byte); + size = SIS630_BYTE_DATA; + break; + case I2C_SMBUS_PROC_CALL: + case I2C_SMBUS_WORD_DATA: + sis630_write(SMB_ADDR, + ((addr & 0x7f) << 1) | (read_write & 0x01)); + sis630_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) { + sis630_write(SMB_BYTE, data->word & 0xff); + sis630_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8); + } + size = (size == I2C_SMBUS_PROC_CALL ? + SIS630_PCALL : SIS630_WORD_DATA); + break; + case I2C_SMBUS_BLOCK_DATA: + sis630_write(SMB_ADDR, + ((addr & 0x7f) << 1) | (read_write & 0x01)); + sis630_write(SMB_CMD, command); + size = SIS630_BLOCK_DATA; + return sis630_block_data(adap, data, read_write); + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; } status = sis630_transaction(adap, size); @@ -393,15 +392,16 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, return 0; } - switch(size) { - case SIS630_BYTE: - case SIS630_BYTE_DATA: - data->byte = sis630_read(SMB_BYTE); - break; - case SIS630_PCALL: - case SIS630_WORD_DATA: - data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8); - break; + switch (size) { + case SIS630_BYTE: + case SIS630_BYTE_DATA: + data->byte = sis630_read(SMB_BYTE); + break; + case SIS630_PCALL: + case SIS630_WORD_DATA: + data->word = sis630_read(SMB_BYTE) + + (sis630_read(SMB_BYTE + 1) << 8); + break; } return 0; @@ -409,9 +409,9 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, static u32 sis630_func(struct i2c_adapter *adapter) { - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL | - I2C_FUNC_SMBUS_BLOCK_DATA; + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA; } static int sis630_setup(struct pci_dev *sis630_dev) @@ -423,19 +423,19 @@ static int sis630_setup(struct pci_dev *sis630_dev) unsigned short acpi_base; /* check for supported SiS devices */ - for (i=0; supported[i] > 0 ; i++) { - if ((dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy))) + for (i = 0; supported[i] > 0; i++) { + dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy); + if (dummy) break; /* found */ } if (dummy) { pci_dev_put(dummy); - } - else if (force) { - dev_err(&sis630_dev->dev, "WARNING: Can't detect SIS630 compatible device, but " + } else if (force) { + dev_err(&sis630_dev->dev, + "WARNING: Can't detect SIS630 compatible device, but " "loading because of force option enabled\n"); - } - else { + } else { return -ENODEV; } @@ -443,7 +443,7 @@ static int sis630_setup(struct pci_dev *sis630_dev) Enable ACPI first , so we can accsess reg 74-75 in acpi io space and read acpi base addr */ - if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG,&b)) { + if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, &b)) { dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n"); retval = -ENODEV; goto exit; @@ -457,8 +457,10 @@ static int sis630_setup(struct pci_dev *sis630_dev) } /* Determine the ACPI base address */ - if (pci_read_config_word(sis630_dev,SIS630_ACPI_BASE_REG,&acpi_base)) { - dev_err(&sis630_dev->dev, "Error: Can't determine ACPI base address\n"); + if (pci_read_config_word(sis630_dev, + SIS630_ACPI_BASE_REG, &acpi_base)) { + dev_err(&sis630_dev->dev, + "Error: Can't determine ACPI base address\n"); retval = -ENODEV; goto exit; } @@ -516,12 +518,14 @@ static DEFINE_PCI_DEVICE_TABLE(sis630_ids) = { { 0, } }; -MODULE_DEVICE_TABLE (pci, sis630_ids); +MODULE_DEVICE_TABLE(pci, sis630_ids); static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id) { if (sis630_setup(dev)) { - dev_err(&dev->dev, "SIS630 comp. bus not detected, module not inserted.\n"); + dev_err(&dev->dev, + "SIS630 compatible bus not detected, " + "module not inserted.\n"); return -ENODEV; }