From: Bruce Allan Date: Fri, 29 Jul 2011 05:52:56 +0000 (+0000) Subject: e1000e: workaround for packet drop on 82579 at 100Mbps X-Git-Tag: v3.0.7~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9202d31661276bee9dd3e69e5a761c5062a9fc50;p=karo-tx-linux.git e1000e: workaround for packet drop on 82579 at 100Mbps commit 0ed013e28fe853244f4972cf18d8e2bd62eeb8fc upstream. The MAC can drop short packets when the PHY detects noise on the line at 100Mbps due to a timing issue. Workaround the issue by increasing the PLL counter so the PHY properly recognizes the synchronization pattern from the MAC. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Cc: Leann Ogasawara Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 3369d1f6a39c..ee77b94834d0 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -137,8 +137,9 @@ #define HV_PM_CTRL PHY_REG(770, 17) /* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 /* EMI Registers */ #define I82579_EMI_ADDR 0x10 @@ -1611,6 +1612,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) s32 ret_val = 0; u16 status_reg = 0; u32 mac_reg; + u16 phy_reg; if (hw->mac.type != e1000_pch2lan) goto out; @@ -1625,12 +1627,19 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) mac_reg = er32(FEXTNVM4); mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - if (status_reg & HV_M_STATUS_SPEED_1000) + ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); + if (ret_val) + goto out; + + if (status_reg & HV_M_STATUS_SPEED_1000) { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - else + phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } else { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - + phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } ew32(FEXTNVM4, mac_reg); + ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } out: