From: Rabin Vincent Date: Wed, 8 Dec 2010 05:37:57 +0000 (+0530) Subject: ux500: remove build-time changing macros X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=92389ca8362c42952c7ebb8a0350ac522dcde0f4;p=linux-beck.git ux500: remove build-time changing macros To allow the possiblity of building U8500 and U5500 support in the same image. Signed-off-by: Rabin Vincent [Rebased to latest changes in Russells tree] Signed-off-by: Linus Walleij --- diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index ccff2dae167f..b2b0a3b9be8f 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -136,8 +136,7 @@ EXPORT_SYMBOL(clk_disable); */ static unsigned long clk_mtu_get_rate(struct clk *clk) { - void __iomem *addr = __io_address(UX500_PRCMU_BASE) - + PRCM_TCR; + void __iomem *addr; u32 tcr; int mtu = (int) clk->data; /* @@ -149,13 +148,20 @@ static unsigned long clk_mtu_get_rate(struct clk *clk) unsigned long mturate; unsigned long retclk; + if (cpu_is_u5500()) + addr = __io_address(U5500_PRCMU_BASE); + else if (cpu_is_u8500()) + addr = __io_address(U8500_PRCMU_BASE); + else + ux500_unknown_soc(); + /* * On a startup, always conifgure the TCR to the doze mode; * bootloaders do it for us. Do this in the kernel too. */ - writel(PRCM_TCR_DOZE_MODE, addr); + writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR); - tcr = readl(addr); + tcr = readl(addr + PRCM_TCR); /* Get the rate from the parent as a default */ if (clk->parent_periph) diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index acc841e48de4..7b0ab8336f3f 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -22,6 +22,16 @@ #include "devices-db5500.h" static struct map_desc u5500_io_desc[] __initdata = { + __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K), + __IO_DEV_DESC(U5500_UART2_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K), + __IO_DEV_DESC(U5500_TWD_BASE, SZ_4K), + __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K), + __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K), + __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K), @@ -143,8 +153,6 @@ static void __init db5500_add_gpios(void) void __init u5500_map_io(void) { - ux500_map_io(); - iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); } diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index c0f34a404c53..1b2b81c0f27c 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -30,6 +30,22 @@ static struct platform_device *platform_devs[] __initdata = { /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K), + __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), + __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), + + __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), @@ -117,8 +133,6 @@ bool cpu_is_u8500v20(void) void __init u8500_map_io(void) { - ux500_map_io(); - iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); if (cpu_is_u8500ed()) diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 5730409c0f7d..35a3af13fb30 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -23,37 +23,29 @@ #include "clock.h" -static struct map_desc ux500_io_desc[] __initdata = { - __IO_DEV_DESC(UX500_UART0_BASE, SZ_4K), - __IO_DEV_DESC(UX500_UART2_BASE, SZ_4K), - - __IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K), - __IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K), - __IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K), - __IO_DEV_DESC(UX500_TWD_BASE, SZ_4K), - __IO_DEV_DESC(UX500_SCU_BASE, SZ_4K), - - __IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K), - __IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K), - __IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K), - __IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K), - __IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K), - - __IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K), - - __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K), -}; +#ifdef CONFIG_CACHE_L2X0 +static void __iomem *l2x0_base; +#endif void __init ux500_map_io(void) { - iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc)); } void __init ux500_init_irq(void) { - gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE), - __io_address(UX500_GIC_CPU_BASE)); + void __iomem *dist_base; + void __iomem *cpu_base; + + if (cpu_is_u5500()) { + dist_base = __io_address(U5500_GIC_DIST_BASE); + cpu_base = __io_address(U5500_GIC_CPU_BASE); + } else if (cpu_is_u8500()) { + dist_base = __io_address(U8500_GIC_DIST_BASE); + cpu_base = __io_address(U8500_GIC_CPU_BASE); + } else + ux500_unknown_soc(); + + gic_init(0, 29, dist_base, cpu_base); /* * Init clocks here so that they are available for system timer @@ -74,7 +66,8 @@ static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) static inline void ux500_cache_sync(void) { - void __iomem *base = __io_address(UX500_L2CC_BASE); + void __iomem *base = l2x0_base; + writel_relaxed(0, base + L2X0_CACHE_SYNC); ux500_cache_wait(base + L2X0_CACHE_SYNC, 1); } @@ -96,20 +89,23 @@ static void ux500_l2x0_disable(void) */ static void ux500_l2x0_inv_all(void) { - void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE); + void __iomem *base = l2x0_base; uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ /* invalidate all ways */ - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); - ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); + writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY); + ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask); ux500_cache_sync(); } static int ux500_l2x0_init(void) { - void __iomem *l2x0_base; - - l2x0_base = __io_address(UX500_L2CC_BASE); + if (cpu_is_u5500()) + l2x0_base = __io_address(U5500_L2CC_BASE); + else if (cpu_is_u8500()) + l2x0_base = __io_address(U8500_L2CC_BASE); + else + ux500_unknown_soc(); /* 64KB way size, 8 way associativity, force WA */ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); @@ -127,13 +123,21 @@ static void __init ux500_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS /* Setup the local timer base */ - twd_base = __io_address(UX500_TWD_BASE); + if (cpu_is_u5500()) + twd_base = __io_address(U5500_TWD_BASE); + else if (cpu_is_u8500()) + twd_base = __io_address(U8500_TWD_BASE); + else + ux500_unknown_soc(); #endif - /* Setup the MTU base */ - if (cpu_is_u8500ed()) + if (cpu_is_u5500()) + mtu_base = __io_address(U5500_MTU0_BASE); + else if (cpu_is_u8500ed()) mtu_base = __io_address(U8500_MTU0_BASE_ED); + else if (cpu_is_u8500()) + mtu_base = __io_address(U8500_MTU0_BASE); else - mtu_base = __io_address(UX500_MTU0_BASE); + ux500_unknown_soc(); nmdk_timer_init(); } diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index be7c0f14e310..700fb05ee815 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -14,7 +14,24 @@ #error Invalid Ux500 debug UART #endif -#define __UX500_UART(n) UX500_UART##n##_BASE +/* + * DEBUG_LL only works if only one SOC is built in. We don't use #else below + * in order to get "__UX500_UART redefined" warnings if more than one SOC is + * built, so that there's some hint during the build that something is wrong. + */ + +#ifdef CONFIG_UX500_SOC_DB5500 +#define __UX500_UART(n) U5500_UART##n##_BASE +#endif + +#ifdef CONFIG_UX500_SOC_DB8500 +#define __UX500_UART(n) U8500_UART##n##_BASE +#endif + +#ifndef __UX500_UART +#error Unknown SOC +#endif + #define UX500_UART(n) __UX500_UART(n) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S index a37f585a3ecb..071bba94f727 100644 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -11,15 +11,10 @@ * warranty of any kind, whether express or implied. */ #include -#define HAVE_GET_IRQNR_PREAMBLE #include .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE) - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 6295cc581355..bced4a8e16ef 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -29,65 +29,6 @@ #include #include -#ifdef CONFIG_UX500_SOC_DB8500 -#define UX500(periph) U8500_##periph##_BASE -#elif defined(CONFIG_UX500_SOC_DB5500) -#define UX500(periph) U5500_##periph##_BASE -#endif - -#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0) -#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1) -#define UX500_B2R2_BASE UX500(B2R2) - -#define UX500_CLKRST1_BASE UX500(CLKRST1) -#define UX500_CLKRST2_BASE UX500(CLKRST2) -#define UX500_CLKRST3_BASE UX500(CLKRST3) -#define UX500_CLKRST5_BASE UX500(CLKRST5) -#define UX500_CLKRST6_BASE UX500(CLKRST6) - -#define UX500_DMA_BASE UX500(DMA) -#define UX500_FSMC_BASE UX500(FSMC) - -#define UX500_GIC_CPU_BASE UX500(GIC_CPU) -#define UX500_GIC_DIST_BASE UX500(GIC_DIST) - -#define UX500_I2C1_BASE UX500(I2C1) -#define UX500_I2C2_BASE UX500(I2C2) -#define UX500_I2C3_BASE UX500(I2C3) - -#define UX500_L2CC_BASE UX500(L2CC) -#define UX500_MCDE_BASE UX500(MCDE) -#define UX500_MTU0_BASE UX500(MTU0) -#define UX500_MTU1_BASE UX500(MTU1) -#define UX500_PRCMU_BASE UX500(PRCMU) - -#define UX500_RNG_BASE UX500(RNG) -#define UX500_RTC_BASE UX500(RTC) - -#define UX500_SCU_BASE UX500(SCU) - -#define UX500_SDI0_BASE UX500(SDI0) -#define UX500_SDI1_BASE UX500(SDI1) -#define UX500_SDI2_BASE UX500(SDI2) -#define UX500_SDI3_BASE UX500(SDI3) -#define UX500_SDI4_BASE UX500(SDI4) - -#define UX500_SPI0_BASE UX500(SPI0) -#define UX500_SPI1_BASE UX500(SPI1) -#define UX500_SPI2_BASE UX500(SPI2) -#define UX500_SPI3_BASE UX500(SPI3) - -#define UX500_SIA_BASE UX500(SIA) -#define UX500_SVA_BASE UX500(SVA) - -#define UX500_TWD_BASE UX500(TWD) - -#define UX500_UART0_BASE UX500(UART0) -#define UX500_UART1_BASE UX500(UART1) -#define UX500_UART2_BASE UX500(UART2) - -#define UX500_USBOTG_BASE UX500(USBOTG) - /* ST-Ericsson modified pl022 id */ #define SSP_PER_ID 0x01080022 @@ -143,6 +84,7 @@ static inline bool cpu_is_u5500(void) } #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) +#define ux500_unknown_soc() BUG() #endif diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 469877e0de90..5d8423294d41 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -14,7 +14,6 @@ #include #include -extern void __init ux500_map_io(void); extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index d77e76cb7edd..4fff4d408417 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -20,6 +20,7 @@ #include #include #include +#include /* * control for which core is the next to come out of the secondary @@ -40,6 +41,18 @@ static void write_pen_release(int val) outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); } +static void __iomem *scu_base_addr(void) +{ + if (cpu_is_u5500()) + return __io_address(U5500_SCU_BASE); + else if (cpu_is_u8500()) + return __io_address(U8500_SCU_BASE); + else + ux500_unknown_soc(); + + return NULL; +} + static DEFINE_SPINLOCK(boot_lock); void __cpuinit platform_secondary_init(unsigned int cpu) @@ -100,21 +113,28 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init wakeup_secondary(void) { + void __iomem *backupram; + + if (cpu_is_u5500()) + backupram = __io_address(U5500_BACKUPRAM0_BASE); + else if (cpu_is_u8500()) + backupram = __io_address(U8500_BACKUPRAM0_BASE); + else + ux500_unknown_soc(); + /* * write the address of secondary startup into the backup ram register * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the * backup ram register at offset 0x1FF0, which is what boot rom code * is waiting for. This would wake up the secondary core from WFE */ -#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4 +#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4 __raw_writel(virt_to_phys(u8500_secondary_startup), - __io_address(UX500_BACKUPRAM0_BASE) + - U8500_CPU1_JUMPADDR_OFFSET); + backupram + UX500_CPU1_JUMPADDR_OFFSET); -#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 +#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 __raw_writel(0xA1FEED01, - __io_address(UX500_BACKUPRAM0_BASE) + - U8500_CPU1_WAKEMAGIC_OFFSET); + backupram + UX500_CPU1_WAKEMAGIC_OFFSET); /* make sure write buffer is drained */ mb(); @@ -126,9 +146,10 @@ static void __init wakeup_secondary(void) */ void __init smp_init_cpus(void) { + void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; - ncores = scu_get_core_count(__io_address(UX500_SCU_BASE)); + ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ if (ncores > NR_CPUS) { @@ -154,6 +175,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - scu_enable(__io_address(UX500_SCU_BASE)); + scu_enable(scu_base_addr()); wakeup_secondary(); }