From: Arnaud Ebalard Date: Fri, 6 Dec 2013 23:13:37 +0000 (+0100) Subject: ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=92beaccd8b4988d13851edc985ac4c3481644e07;p=linux-beck.git ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file Now that NAND controller support is available for Armada 370 (cb28e2537a6f: ARM: mvebu: Add support for NAND controller in Armada 370/XP), this patch enables support for ReadyNAS 102 and defines default partition layout as delivered by NETGEAR. As described in similar commits 2be2bc39c6f0 (ARM: mvebu: Enable NAND controller in Armada XP GP board) and d8c552dddfbf (ARM: mvebu: Enable NAND controller in Armada 370 Mirabox), "marvell,keep-config" parameter is used as current support does not allow for setting of timing parameters yet. Signed-off-by: Arnaud Ebalard Signed-off-by: Jason Cooper --- diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 1c2d13d3e597..6a7383f24c7c 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -131,6 +131,42 @@ pwm_polarity = <0>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; + }; }; };