From: Rajkumar Manoharan Date: Fri, 22 Apr 2011 09:20:39 +0000 (+0530) Subject: ath9k: set beacon related ps flags on bss_info change X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=92c6f76c6d44a869bf3b252dbb2e358ae7399a96;p=linux-beck.git ath9k: set beacon related ps flags on bss_info change Requesting beacon sync up to configure beacon timers properly in hw, has be done after doing beacon config with default values. Setting the flags in beacon config is causing the device to not enter into network sleep on idle state. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 24f565ba9988..22cd241a098b 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -781,12 +781,6 @@ void ath_set_beacon(struct ath_softc *sc) break; case NL80211_IFTYPE_STATION: ath_beacon_config_sta(sc, cur_conf); - /* - * Request a re-configuration of Beacon related timers - * on the receipt of the first Beacon frame (i.e., - * after time sync with the AP). - */ - sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON; break; default: ath_dbg(common, ATH_DBG_CONFIG, diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 475009b578de..c3dbf2661a3f 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1969,6 +1969,12 @@ static void ath9k_bss_iter(void *data, u8 *mac, struct ieee80211_vif *vif) "Bss Info ASSOC %d, bssid: %pM\n", bss_conf->aid, common->curbssid); ath_beacon_config(sc, vif); + /* + * Request a re-configuration of Beacon related timers + * on the receipt of the first Beacon frame (i.e., + * after time sync with the AP). + */ + sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON; /* Reset rssi stats */ sc->last_rssi = ATH_RSSI_DUMMY_MARKER; sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;