From: Vardan Mikayelyan Date: Thu, 26 May 2016 01:07:05 +0000 (-0700) Subject: usb: dwc2: gadget: Add dwc2_gadget_incr_frame_num() X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=92d1635d781ac17fc7d886b0c126838083f3c2b9;p=linux-beck.git usb: dwc2: gadget: Add dwc2_gadget_incr_frame_num() Increases and checks targeted frame number of current ep if overrun happened, sets flag and masks with DSTS_SOFFN_LIMIT Added following fields to struct dwc2_hsotg_ep -target_frame: Targeted frame num to setup next ISOC transfer -frame_overrun: Indicates SOF number overrun in DSTS Tested-by: John Keeping Signed-off-by: Vardan Mikayelyan Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index dec0b21fc626..55160992b181 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -177,6 +177,8 @@ struct dwc2_hsotg_req; * @fifo_load: The amount of data loaded into the FIFO (periodic IN) * @last_load: The offset of data for the last start of request. * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN + * @target_frame: Targeted frame num to setup next ISOC transfer + * @frame_overrun: Indicates SOF number overrun in DSTS * * This is the driver's state for each registered enpoint, allowing it * to keep track of transactions that need doing. Each endpoint has a @@ -214,6 +216,9 @@ struct dwc2_hsotg_ep { unsigned int isochronous:1; unsigned int send_zlp:1; unsigned int has_correct_parity:1; + unsigned int target_frame; +#define TARGET_FRAME_INITIAL 0xFFFFFFFF + bool frame_overrun; char name[10]; }; diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 54d242b6d2aa..b8f3661771f0 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -96,6 +96,25 @@ static inline bool using_dma(struct dwc2_hsotg *hsotg) return hsotg->g_using_dma; } +/** + * dwc2_gadget_incr_frame_num - Increments the targeted frame number. + * @hs_ep: The endpoint + * @increment: The value to increment by + * + * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT. + * If an overrun occurs it will wrap the value and set the frame_overrun flag. + */ +static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) +{ + hs_ep->target_frame += hs_ep->interval; + if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) { + hs_ep->frame_overrun = 1; + hs_ep->target_frame &= DSTS_SOFFN_LIMIT; + } else { + hs_ep->frame_overrun = 0; + } +} + /** * dwc2_hsotg_en_gsint - enable one or more of the general interrupt * @hsotg: The device state