From: Hariprasad S Date: Fri, 6 May 2016 16:47:56 +0000 (+0530) Subject: RDMA/iw_cxgb4: set the correct FID value in DSGL commands X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=92f850ec3a18d9d8bf2157a8509d435d49ce80b6;p=linux-beck.git RDMA/iw_cxgb4: set the correct FID value in DSGL commands The FID value in a ULP_MEMIO command needs to be set to an IQ ID of a queue configured for our PF. The FID/IQ id is used to index into the PCIE FID table, to find out on which function the DMA needs to be issued. Essentially, every DMA needs to have the ingress queue. The exact ingress queue doesn't matter, but it needs to be an ingress queue associated with the function you want to see the DMA on. Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford --- diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c index 008be07d5604..d495675ea68d 100644 --- a/drivers/infiniband/hw/cxgb4/mem.c +++ b/drivers/infiniband/hw/cxgb4/mem.c @@ -86,8 +86,9 @@ static int _c4iw_write_mem_dma_aligned(struct c4iw_rdev *rdev, u32 addr, (wait ? FW_WR_COMPL_F : 0)); req->wr.wr_lo = wait ? (__force __be64)(unsigned long) &wr_wait : 0L; req->wr.wr_mid = cpu_to_be32(FW_WR_LEN16_V(DIV_ROUND_UP(wr_len, 16))); - req->cmd = cpu_to_be32(ULPTX_CMD_V(ULP_TX_MEM_WRITE)); - req->cmd |= cpu_to_be32(T5_ULP_MEMIO_ORDER_V(1)); + req->cmd = cpu_to_be32(ULPTX_CMD_V(ULP_TX_MEM_WRITE) | + T5_ULP_MEMIO_ORDER_V(1) | + T5_ULP_MEMIO_FID_V(rdev->lldi.rxq_ids[0])); req->dlen = cpu_to_be32(ULP_MEMIO_DATA_LEN_V(len>>5)); req->len16 = cpu_to_be32(DIV_ROUND_UP(wr_len-sizeof(req->wr), 16)); req->lock_addr = cpu_to_be32(ULP_MEMIO_ADDR_V(addr)); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h index 80417fc564d4..4705e2dea423 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h @@ -1392,6 +1392,10 @@ struct ulp_mem_io { #define T5_ULP_MEMIO_ORDER_V(x) ((x) << T5_ULP_MEMIO_ORDER_S) #define T5_ULP_MEMIO_ORDER_F T5_ULP_MEMIO_ORDER_V(1U) +#define T5_ULP_MEMIO_FID_S 4 +#define T5_ULP_MEMIO_FID_M 0x7ff +#define T5_ULP_MEMIO_FID_V(x) ((x) << T5_ULP_MEMIO_FID_S) + /* ulp_mem_io.lock_addr fields */ #define ULP_MEMIO_ADDR_S 0 #define ULP_MEMIO_ADDR_V(x) ((x) << ULP_MEMIO_ADDR_S)