From: Jeff Kirsher Date: Fri, 13 May 2011 09:24:46 +0000 (-0700) Subject: myri*: Move the Myricom drivers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=93f7848b77bcf1108879defd32612422ae80d785;p=mv-sheeva.git myri*: Move the Myricom drivers Move the Myricom drivers into drivers/net/ethernet/myricom/ and make the necessary Kconfig and Makefile changes. CC: Andrew Gallatin CC: Brice Goglin Signed-off-by: Jeff Kirsher --- diff --git a/MAINTAINERS b/MAINTAINERS index 0613e60fa64..0a5ae236bef 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4335,7 +4335,7 @@ M: Andrew Gallatin L: netdev@vger.kernel.org W: http://www.myri.com/scs/download-Myri10GE.html S: Supported -F: drivers/net/myri10ge/ +F: drivers/net/ethernet/myricom/myri10ge/ NATSEMI ETHERNET DRIVER (DP8381x) M: Tim Hockin diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 56c033a32bd..38fcaea7c61 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1519,32 +1519,6 @@ config VXGE_DEBUG_TRACE_ALL the vxge driver. By default only few debug trace statements are enabled. -config MYRI10GE - tristate "Myricom Myri-10G Ethernet support" - depends on PCI && INET - select FW_LOADER - select CRC32 - select INET_LRO - ---help--- - This driver supports Myricom Myri-10G Dual Protocol interface in - Ethernet mode. If the eeprom on your board is not recent enough, - you will need a newer firmware image. - You may get this image or more information, at: - - - - To compile this driver as a module, choose M here. The module - will be called myri10ge. - -config MYRI10GE_DCA - bool "Direct Cache Access (DCA) Support" - default y - depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m) - ---help--- - Say Y here if you want to use Direct Cache Access (DCA) in the - driver. DCA is a method for warming the CPU cache before data - is used, with the intent of lessening the impact of cache misses. - config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" depends on PPC_PASEMI && PCI && INET diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 73e357e1d16..b9e1f5ab6cc 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -151,7 +151,6 @@ obj-$(CONFIG_R8169) += r8169.o obj-$(CONFIG_IBMVETH) += ibmveth.o obj-$(CONFIG_S2IO) += s2io.o obj-$(CONFIG_VXGE) += vxge/ -obj-$(CONFIG_MYRI10GE) += myri10ge/ obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o obj-$(CONFIG_BFIN_MAC) += bfin_mac.o obj-$(CONFIG_DM9000) += dm9000.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 8bbddc94ef2..ce3040d98de 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -21,6 +21,7 @@ source "drivers/net/ethernet/emulex/Kconfig" source "drivers/net/ethernet/intel/Kconfig" source "drivers/net/ethernet/i825xx/Kconfig" source "drivers/net/ethernet/mellanox/Kconfig" +source "drivers/net/ethernet/myricom/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig" source "drivers/net/ethernet/racal/Kconfig" source "drivers/net/ethernet/sfc/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index e5f2954f7c7..b4dcb930de7 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/ obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ +obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ obj-$(CONFIG_SFC) += sfc/ diff --git a/drivers/net/ethernet/myricom/Kconfig b/drivers/net/ethernet/myricom/Kconfig new file mode 100644 index 00000000000..1816ae12ce0 --- /dev/null +++ b/drivers/net/ethernet/myricom/Kconfig @@ -0,0 +1,46 @@ +# +# Myricom device configuration +# + +config NET_VENDOR_MYRI + bool "Myricom devices" + depends on PCI && INET + ---help--- + If you have a network (Ethernet) card belonging to this class, say + Y and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Myricom cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_MYRI + +config MYRI10GE + tristate "Myricom Myri-10G Ethernet support" + depends on PCI && INET + select FW_LOADER + select CRC32 + select INET_LRO + ---help--- + This driver supports Myricom Myri-10G Dual Protocol interface in + Ethernet mode. If the eeprom on your board is not recent enough, + you will need a newer firmware image. + You may get this image or more information, at: + + + + To compile this driver as a module, choose M here. The module + will be called myri10ge. + +config MYRI10GE_DCA + bool "Direct Cache Access (DCA) Support" + default y + depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. + +endif # NET_VENDOR_MYRI diff --git a/drivers/net/ethernet/myricom/Makefile b/drivers/net/ethernet/myricom/Makefile new file mode 100644 index 00000000000..296c0a10056 --- /dev/null +++ b/drivers/net/ethernet/myricom/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Myricom network device drivers. +# + +obj-$(CONFIG_MYRI10GE) += myri10ge/ diff --git a/drivers/net/myri10ge/Makefile b/drivers/net/ethernet/myricom/myri10ge/Makefile similarity index 100% rename from drivers/net/myri10ge/Makefile rename to drivers/net/ethernet/myricom/myri10ge/Makefile diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c similarity index 100% rename from drivers/net/myri10ge/myri10ge.c rename to drivers/net/ethernet/myricom/myri10ge/myri10ge.c diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h similarity index 100% rename from drivers/net/myri10ge/myri10ge_mcp.h rename to drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h similarity index 100% rename from drivers/net/myri10ge/myri10ge_mcp_gen_header.h rename to drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h