From: Krzysztof Kozlowski Date: Mon, 18 Apr 2016 13:33:10 +0000 (+0200) Subject: regulator: s2mps11: Set default ramp delay for S2MPS11 LDOs X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=94be46b9e5e2954b6d5962750f8aae8b5f099baa;p=linux-beck.git regulator: s2mps11: Set default ramp delay for S2MPS11 LDOs Driver did not provide default value for ramp delay for LDOs which lead to warning in dmesg, e.g. on Odroid XU4: [ 1.486076] vdd_ldo9: ramp_delay not set [ 1.506875] vddq_mmc2: ramp_delay not set [ 1.523766] vdd_ldo15: ramp_delay not set [ 1.544702] vdd_sd: ramp_delay not set The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 46e5a2922c4d..47c7de8f39e9 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -267,6 +267,7 @@ static struct regulator_ops s2mps11_buck_ops = { .ops = &s2mps11_ldo_ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ + .ramp_delay = RAMP_DELAY_12_MVUS, \ .min_uV = MIN_800_MV, \ .uV_step = step, \ .n_voltages = S2MPS11_LDO_N_VOLTAGES, \ diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 6bc4bcd488ac..5a23dd4df432 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -30,6 +30,9 @@ #define MIN_600_MV 600000 #define MIN_500_MV 500000 +/* Ramp delay in uV/us */ +#define RAMP_DELAY_12_MVUS 12000 + /* Macros to represent steps for LDO/BUCK */ #define STEP_50_MV 50000 #define STEP_25_MV 25000