From: John Garry Date: Mon, 25 Jan 2016 18:47:09 +0000 (+0800) Subject: hisi_sas: add v2 hw init X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=94eac9e1abb9f480e4f2d436dc2fea78131f5f16;p=linux-beck.git hisi_sas: add v2 hw init Add code to initialise the hardware. Support is also added to deal with the "am-max-transmissions" (amt) limitation in hip06 controller #1. This is how many connection requests we can send on the system bus before waiting for a response. Due to chip bus design, controller #1 is limited to 32 amt, while, by design, a controller supports 64. The default value for the nibbles in the relevant registers is 0x40; these need to be programmed with 0x20. Signed-off-by: John Garry Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 31e4fdc0909f..da9c375cdff9 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -249,7 +249,295 @@ #define ITCT_HDR_RTOLT_OFF 48 #define ITCT_HDR_RTOLT_MSK (0xffffULL << ITCT_HDR_RTOLT_OFF) +struct hisi_sas_complete_v2_hdr { + __le32 dw0; + __le32 dw1; + __le32 act; + __le32 dw3; +}; + +#define HISI_SAS_COMMAND_ENTRIES_V2_HW 4096 + +static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off) +{ + void __iomem *regs = hisi_hba->regs + off; + + return readl(regs); +} + +static void hisi_sas_write32(struct hisi_hba *hisi_hba, u32 off, u32 val) +{ + void __iomem *regs = hisi_hba->regs + off; + + writel(val, regs); +} + +static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba, int phy_no, + u32 off, u32 val) +{ + void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off; + + writel(val, regs); +} + +static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba, + int phy_no, u32 off) +{ + void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off; + + return readl(regs); +} + +static int reset_hw_v2_hw(struct hisi_hba *hisi_hba) +{ + int i, reset_val; + u32 val; + unsigned long end_time; + struct device *dev = &hisi_hba->pdev->dev; + + /* The mask needs to be set depending on the number of phys */ + if (hisi_hba->n_phy == 9) + reset_val = 0x1fffff; + else + reset_val = 0x7ffff; + + /* Disable all of the DQ */ + for (i = 0; i < HISI_SAS_MAX_QUEUES; i++) + hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0); + + /* Disable all of the PHYs */ + for (i = 0; i < hisi_hba->n_phy; i++) { + u32 phy_cfg = hisi_sas_phy_read32(hisi_hba, i, PHY_CFG); + + phy_cfg &= ~PHY_CTRL_RESET_MSK; + hisi_sas_phy_write32(hisi_hba, i, PHY_CFG, phy_cfg); + } + udelay(50); + + /* Ensure DMA tx & rx idle */ + for (i = 0; i < hisi_hba->n_phy; i++) { + u32 dma_tx_status, dma_rx_status; + + end_time = jiffies + msecs_to_jiffies(1000); + + while (1) { + dma_tx_status = hisi_sas_phy_read32(hisi_hba, i, + DMA_TX_STATUS); + dma_rx_status = hisi_sas_phy_read32(hisi_hba, i, + DMA_RX_STATUS); + + if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) && + !(dma_rx_status & DMA_RX_STATUS_BUSY_MSK)) + break; + + msleep(20); + if (time_after(jiffies, end_time)) + return -EIO; + } + } + + /* Ensure axi bus idle */ + end_time = jiffies + msecs_to_jiffies(1000); + while (1) { + u32 axi_status = + hisi_sas_read32(hisi_hba, AXI_CFG); + + if (axi_status == 0) + break; + + msleep(20); + if (time_after(jiffies, end_time)) + return -EIO; + } + + /* reset and disable clock*/ + regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg, + reset_val); + regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4, + reset_val); + msleep(1); + regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val); + if (reset_val != (val & reset_val)) { + dev_err(dev, "SAS reset fail.\n"); + return -EIO; + } + + /* De-reset and enable clock*/ + regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4, + reset_val); + regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg, + reset_val); + msleep(1); + regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, + &val); + if (val & reset_val) { + dev_err(dev, "SAS de-reset fail.\n"); + return -EIO; + } + + return 0; +} + +static void init_reg_v2_hw(struct hisi_hba *hisi_hba) +{ + struct device *dev = &hisi_hba->pdev->dev; + struct device_node *np = dev->of_node; + int i; + + /* Global registers init */ + + /* Deal with am-max-transmissions quirk */ + if (of_get_property(np, "hip06-sas-v2-quirk-amt", NULL)) { + hisi_sas_write32(hisi_hba, AM_CFG_MAX_TRANS, 0x2020); + hisi_sas_write32(hisi_hba, AM_CFG_SINGLE_PORT_MAX_TRANS, + 0x2020); + } /* Else, use defaults -> do nothing */ + + hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, + (u32)((1ULL << hisi_hba->queue_count) - 1)); + hisi_sas_write32(hisi_hba, AXI_USER1, 0xc0000000); + hisi_sas_write32(hisi_hba, AXI_USER2, 0x10000); + hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x108); + hisi_sas_write32(hisi_hba, HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL, 0x7FF); + hisi_sas_write32(hisi_hba, OPENA_WT_CONTI_TIME, 0x1); + hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x1F4); + hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x4E20); + hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x1); + hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1); + hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x1); + hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1); + hisi_sas_write32(hisi_hba, INT_COAL_EN, 0x1); + hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x1); + hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 0x1); + hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1); + hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1); + hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0x0); + hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff); + hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff); + hisi_sas_write32(hisi_hba, ENT_INT_SRC3, 0xffffffff); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0x7efefefe); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0x7efefefe); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0x7ffffffe); + hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xfffff3c0); + for (i = 0; i < hisi_hba->queue_count; i++) + hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK+0x4*i, 0); + + hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 1); + hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1); + + for (i = 0; i < hisi_hba->n_phy; i++) { + hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x855); + hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, 0x30b9908); + hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d); + hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x10); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xffffffff); + hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8ffffbff); + hisi_sas_phy_write32(hisi_hba, i, SL_CFG, 0x23f801fc); + hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_DWS_RESET_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199B694); + } + + for (i = 0; i < hisi_hba->queue_count; i++) { + /* Delivery queue */ + hisi_sas_write32(hisi_hba, + DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14), + upper_32_bits(hisi_hba->cmd_hdr_dma[i])); + + hisi_sas_write32(hisi_hba, DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14), + lower_32_bits(hisi_hba->cmd_hdr_dma[i])); + + hisi_sas_write32(hisi_hba, DLVRY_Q_0_DEPTH + (i * 0x14), + HISI_SAS_QUEUE_SLOTS); + + /* Completion queue */ + hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_HI + (i * 0x14), + upper_32_bits(hisi_hba->complete_hdr_dma[i])); + + hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_LO + (i * 0x14), + lower_32_bits(hisi_hba->complete_hdr_dma[i])); + + hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14), + HISI_SAS_QUEUE_SLOTS); + } + + /* itct */ + hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO, + lower_32_bits(hisi_hba->itct_dma)); + + hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI, + upper_32_bits(hisi_hba->itct_dma)); + + /* iost */ + hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO, + lower_32_bits(hisi_hba->iost_dma)); + + hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI, + upper_32_bits(hisi_hba->iost_dma)); + + /* breakpoint */ + hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_LO, + lower_32_bits(hisi_hba->breakpoint_dma)); + + hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_HI, + upper_32_bits(hisi_hba->breakpoint_dma)); + + /* SATA broken msg */ + hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_LO, + lower_32_bits(hisi_hba->sata_breakpoint_dma)); + + hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_HI, + upper_32_bits(hisi_hba->sata_breakpoint_dma)); + + /* SATA initial fis */ + hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_LO, + lower_32_bits(hisi_hba->initial_fis_dma)); + + hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_HI, + upper_32_bits(hisi_hba->initial_fis_dma)); +} + +static int hw_init_v2_hw(struct hisi_hba *hisi_hba) +{ + struct device *dev = &hisi_hba->pdev->dev; + int rc; + + rc = reset_hw_v2_hw(hisi_hba); + if (rc) { + dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc); + return rc; + } + + msleep(100); + init_reg_v2_hw(hisi_hba); + + return 0; +} + +static int hisi_sas_v2_init(struct hisi_hba *hisi_hba) +{ + int rc; + + rc = hw_init_v2_hw(hisi_hba); + if (rc) + return rc; + + return 0; +} + static const struct hisi_sas_hw hisi_sas_v2_hw = { + .hw_init = hisi_sas_v2_init, + .max_command_entries = HISI_SAS_COMMAND_ENTRIES_V2_HW, + .complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr), }; static int hisi_sas_v2_probe(struct platform_device *pdev)