From: Bill Gatliff <bgat@billgatliff.com>
Date: Mon, 7 Apr 2008 21:05:38 +0000 (+0100)
Subject: [ARM] 4937/1: [CSB637] Convert to new-style UART initialization
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=952c855fc7a88610940d2438072884d64dc9cefb;p=linux-beck.git

[ARM] 4937/1: [CSB637] Convert to new-style UART initialization

Converts the CSB637 to the new-style UART initialization API.

Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index c5c721d27f42..26cda4301674 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -40,17 +40,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata csb637_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init csb637_map_io(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
@@ -59,8 +48,11 @@ static void __init csb637_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&csb637_uart_config);
+	/* DBGU on ttyS0 */
+	at91_register_uart(0, 0, 0);
+
+	/* make console=ttyS0 the default */
+	at91_set_serial_console(0);
 }
 
 static void __init csb637_init_irq(void)