From: Ludovic Desroches Date: Mon, 23 Nov 2015 13:09:39 +0000 (+0100) Subject: dmaengine: at_xdmac: fix spurious flag status for mem2mem transfers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=95da0c19d164f6df0b71a5187950f47d4b746e91;p=linux-beck.git dmaengine: at_xdmac: fix spurious flag status for mem2mem transfers When setting the channel configuration register, the perid field is not set to 0 since it is useless for mem2mem transfers. Unfortunately, a device has 0 as perid. It could cause spurious flags status because the controller could mix some events from the two channels. For that reason, use the highest perid value for mem2mem transfers since it doesn't match the perid of other devices. Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre Signed-off-by: Vinod Koul --- diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index b5e132d4bae5..f2b6e7d22765 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -863,8 +863,12 @@ at_xdmac_interleaved_queue_desc(struct dma_chan *chan, * access. Hopefully we can access DDR through both ports (at least on * SAMA5D4x), so we can use the same interface for source and dest, * that solves the fact we don't know the direction. + * ERRATA: Even if useless for memory transfers, the PERID has to not + * match the one of another channel. If not, it could lead to spurious + * flag status. */ - u32 chan_cc = AT_XDMAC_CC_DIF(0) + u32 chan_cc = AT_XDMAC_CC_PERID(0x3f) + | AT_XDMAC_CC_DIF(0) | AT_XDMAC_CC_SIF(0) | AT_XDMAC_CC_MBSIZE_SIXTEEN | AT_XDMAC_CC_TYPE_MEM_TRAN; @@ -1039,8 +1043,12 @@ at_xdmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, * access DDR through both ports (at least on SAMA5D4x), so we can use * the same interface for source and dest, that solves the fact we * don't know the direction. + * ERRATA: Even if useless for memory transfers, the PERID has to not + * match the one of another channel. If not, it could lead to spurious + * flag status. */ - u32 chan_cc = AT_XDMAC_CC_DAM_INCREMENTED_AM + u32 chan_cc = AT_XDMAC_CC_PERID(0x3f) + | AT_XDMAC_CC_DAM_INCREMENTED_AM | AT_XDMAC_CC_SAM_INCREMENTED_AM | AT_XDMAC_CC_DIF(0) | AT_XDMAC_CC_SIF(0) @@ -1140,8 +1148,12 @@ static struct at_xdmac_desc *at_xdmac_memset_create_desc(struct dma_chan *chan, * access. Hopefully we can access DDR through both ports (at least on * SAMA5D4x), so we can use the same interface for source and dest, * that solves the fact we don't know the direction. + * ERRATA: Even if useless for memory transfers, the PERID has to not + * match the one of another channel. If not, it could lead to spurious + * flag status. */ - u32 chan_cc = AT_XDMAC_CC_DAM_UBS_AM + u32 chan_cc = AT_XDMAC_CC_PERID(0x3f) + | AT_XDMAC_CC_DAM_UBS_AM | AT_XDMAC_CC_SAM_INCREMENTED_AM | AT_XDMAC_CC_DIF(0) | AT_XDMAC_CC_SIF(0)