From: Christian Lamparter Date: Fri, 7 Sep 2012 23:48:19 +0000 (+0200) Subject: p54: connect to 11w protected networks X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=960334a7d33ecd54ba5337275dc4ea701d1dbf5e;p=linux-beck.git p54: connect to 11w protected networks Previously, it was not possible to connect to networks which requires 11w to be supported by the stations. Note: As all current (and old) firmwares corrupt incoming, protected management frames, the decryption offloading needs to be disabled. This will be done automatically if needed. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c index 2969d5321ca6..aadda99989c0 100644 --- a/drivers/net/wireless/p54/main.c +++ b/drivers/net/wireless/p54/main.c @@ -515,6 +515,17 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, if (modparam_nohwcrypt) return -EOPNOTSUPP; + if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT) { + /* + * Unfortunately most/all firmwares are trying to decrypt + * incoming management frames if a suitable key can be found. + * However, in doing so the data in these frames gets + * corrupted. So, we can't have firmware supported crypto + * offload in this case. + */ + return -EOPNOTSUPP; + } + mutex_lock(&priv->conf_mutex); if (cmd == SET_KEY) { switch (key->cipher) { @@ -738,6 +749,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | + IEEE80211_HW_MFP_CAPABLE | IEEE80211_HW_REPORTS_TX_ACK_STATUS; dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |