From: Mircea Gherzan <mgherzan@gmail.com>
Date: Wed, 9 May 2012 21:19:13 +0000 (-0700)
Subject: ARM: OMAP: WiLink platform data for the PandaBoard
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9624f615520696ffa845da2de56277197155b48c;p=linux-beck.git

ARM: OMAP: WiLink platform data for the PandaBoard

The "uim" deamon requires sysfs entries that are filled in using
this platform data.

Signed-off-by: Mircea Gherzan <mgherzan@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 1b782ba53433..1b2eb289b8b8 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -28,6 +28,7 @@
 #include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
+#include <linux/ti_wilink_st.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -58,12 +59,21 @@
 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
 /* wl127x BT, FM, GPS connectivity chip */
-static int wl1271_gpios[] = {46, -1, -1};
+static struct ti_st_plat_data wilink_platform_data = {
+	.nshutdown_gpio	= 46,
+	.dev_name	= "/dev/ttyO1",
+	.flow_cntrl	= 1,
+	.baud_rate	= 3000000,
+	.chip_enable	= NULL,
+	.suspend	= NULL,
+	.resume		= NULL,
+};
+
 static struct platform_device wl1271_device = {
 	.name	= "kim",
 	.id	= -1,
 	.dev	= {
-		.platform_data	= &wl1271_gpios,
+		.platform_data	= &wilink_platform_data,
 	},
 };
 
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 2ef4385da6bf..3ca0269dd0b5 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -25,6 +25,8 @@
 #ifndef TI_WILINK_ST_H
 #define TI_WILINK_ST_H
 
+#include <linux/skbuff.h>
+
 /**
  * enum proto-type - The protocol on WiLink chips which share a
  *	common physical interface like UART.