From: Niklas Cassel Date: Sat, 25 Jul 2015 00:00:40 +0000 (+0200) Subject: serial: etraxfs-uart: remove empty functions X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9625734ff75af35d9878c693e3f92237aa3c1ae6;p=linux-beck.git serial: etraxfs-uart: remove empty functions Implementing enable_ms is optional by serial_core. check_modem_status is just an empty local function. Signed-off-by: Niklas Cassel Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/etraxfs-uart.c b/drivers/tty/serial/etraxfs-uart.c index 72d89a8ff27e..8f242dc84cea 100644 --- a/drivers/tty/serial/etraxfs-uart.c +++ b/drivers/tty/serial/etraxfs-uart.c @@ -366,14 +366,6 @@ static void etraxfs_uart_stop_rx(struct uart_port *port) REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); } -static void etraxfs_uart_enable_ms(struct uart_port *port) -{ -} - -static void check_modem_status(struct uart_cris_port *up) -{ -} - static unsigned int etraxfs_uart_tx_empty(struct uart_port *port) { struct uart_cris_port *up = (struct uart_cris_port *)port; @@ -591,7 +583,6 @@ ser_interrupt(int irq, void *dev_id) receive_chars_no_dma(up); handled = 1; } - check_modem_status(up); if (masked_intr.tr_rdy) { transmit_chars_no_dma(up); @@ -855,7 +846,6 @@ static const struct uart_ops etraxfs_uart_pops = { .start_tx = etraxfs_uart_start_tx, .send_xchar = etraxfs_uart_send_xchar, .stop_rx = etraxfs_uart_stop_rx, - .enable_ms = etraxfs_uart_enable_ms, .break_ctl = etraxfs_uart_break_ctl, .startup = etraxfs_uart_startup, .shutdown = etraxfs_uart_shutdown,