From: Bernhard Bender Date: Thu, 23 Jul 2015 20:58:08 +0000 (-0700) Subject: Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=968491709e5b1aaf429428814fff3d932fa90b60;p=linux-beck.git Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Cc: stable@vger.kernel.org Suggested-by: Jakob Mustafa Signed-off-by: Bernhard Bender Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index f2c6c352c55a..2c41107240de 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -627,6 +627,9 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) goto err_out; } + /* TSC-25 data sheet specifies a delay after the RESET command */ + msleep(150); + /* set coordinate output rate */ buf[0] = buf[1] = 0xFF; ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),