From: Felipe Balbi Date: Mon, 23 Jan 2017 12:20:04 +0000 (+0200) Subject: usb: host: xhci: change pre-increments to post-increments X-Git-Tag: v4.11-rc1~119^2~66 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=98871e9470a50c8c0154b7220495b60ec055e02f;p=karo-tx-linux.git usb: host: xhci: change pre-increments to post-increments This is a cleanup patch only, no functional changes. The idea is just to make sure for loops look the same all over the driver. Signed-off-by: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 74c42f722678..a3b67f33d4d8 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -177,7 +177,7 @@ static void xhci_print_ports(struct xhci_hcd *xhci) ports = HCS_MAX_PORTS(xhci->hcs_params1); addr = &xhci->op_regs->port_status_base; for (i = 0; i < ports; i++) { - for (j = 0; j < NUM_PORT_REGS; ++j) { + for (j = 0; j < NUM_PORT_REGS; j++) { xhci_dbg(xhci, "%p port %s reg = 0x%x\n", addr, names[j], (unsigned int) readl(addr)); @@ -240,7 +240,7 @@ void xhci_print_run_regs(struct xhci_hcd *xhci) xhci_dbg(xhci, " %p: Microframe index = 0x%x\n", &xhci->run_regs->microframe_index, (unsigned int) temp); - for (i = 0; i < 7; ++i) { + for (i = 0; i < 7; i++) { temp = readl(&xhci->run_regs->rsvd[i]); if (temp != XHCI_INIT_VALUE) xhci_dbg(xhci, " WARN: %p: Rsvd[%i] = 0x%x\n", @@ -259,7 +259,7 @@ void xhci_print_registers(struct xhci_hcd *xhci) void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb) { int i; - for (i = 0; i < 4; ++i) + for (i = 0; i < 4; i++) xhci_dbg(xhci, "Offset 0x%x = 0x%x\n", i*4, trb->generic.field[i]); } @@ -332,7 +332,7 @@ void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg) u64 addr = seg->dma; union xhci_trb *trb = seg->trbs; - for (i = 0; i < TRBS_PER_SEGMENT; ++i) { + for (i = 0; i < TRBS_PER_SEGMENT; i++) { trb = &seg->trbs[i]; xhci_dbg(xhci, "@%016llx %08x %08x %08x %08x\n", addr, lower_32_bits(le64_to_cpu(trb->link.segment_ptr)), @@ -413,7 +413,7 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst) int i; struct xhci_erst_entry *entry; - for (i = 0; i < erst->num_entries; ++i) { + for (i = 0; i < erst->num_entries; i++) { entry = &erst->entries[i]; xhci_dbg(xhci, "@%016llx %08x %08x %08x %08x\n", addr, @@ -440,7 +440,7 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci) static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma) { int i; - for (i = 0; i < 4; ++i) { + for (i = 0; i < 4; i++) { xhci_dbg(xhci, "@%p (virt) @%08llx " "(dma) %#08llx - rsvd64[%d]\n", &ctx[4 + i], (unsigned long long)dma, @@ -496,7 +496,7 @@ static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx * &slot_ctx->dev_state, (unsigned long long)dma, slot_ctx->dev_state); dma += field_size; - for (i = 0; i < 4; ++i) { + for (i = 0; i < 4; i++) { xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", &slot_ctx->reserved[i], (unsigned long long)dma, slot_ctx->reserved[i], i); @@ -519,7 +519,7 @@ static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, if (last_ep < 31) last_ep_ctx = last_ep + 1; - for (i = 0; i < last_ep_ctx; ++i) { + for (i = 0; i < last_ep_ctx; i++) { unsigned int epaddr = xhci_get_endpoint_address(i); struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i); dma_addr_t dma = ctx->dma + @@ -544,7 +544,7 @@ static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, &ep_ctx->tx_info, (unsigned long long)dma, ep_ctx->tx_info); dma += field_size; - for (j = 0; j < 3; ++j) { + for (j = 0; j < 3; j++) { xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n", &ep_ctx->reserved[j], (unsigned long long)dma, @@ -583,7 +583,7 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci, &ctrl_ctx->add_flags, (unsigned long long)dma, ctrl_ctx->add_flags); dma += field_size; - for (i = 0; i < 6; ++i) { + for (i = 0; i < 6; i++) { xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n", &ctrl_ctx->rsvd2[i], (unsigned long long)dma, ctrl_ctx->rsvd2[i], i); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 8414ed2a02de..0640e76207ba 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -943,7 +943,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) if (dev->tt_info) old_active_eps = dev->tt_info->active_eps; - for (i = 0; i < 31; ++i) { + for (i = 0; i < 31; i++) { if (dev->eps[i].ring) xhci_ring_free(xhci, dev->eps[i].ring); if (dev->eps[i].stream_info) @@ -1587,7 +1587,7 @@ void xhci_update_bw_info(struct xhci_hcd *xhci, unsigned int ep_type; int i; - for (i = 1; i < 31; ++i) { + for (i = 1; i < 31; i++) { bw_info = &virt_dev->eps[i].bw_info; /* We can't tell what endpoint type is being dropped, but @@ -2569,9 +2569,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * something other than the default (~1ms minimum between interrupts). * See section 5.5.1.2. */ - for (i = 0; i < MAX_HC_SLOTS; ++i) + for (i = 0; i < MAX_HC_SLOTS; i++) xhci->devs[i] = NULL; - for (i = 0; i < USB_MAXCHILDREN; ++i) { + for (i = 0; i < USB_MAXCHILDREN; i++) { xhci->bus_state[0].resume_done[i] = 0; xhci->bus_state[1].resume_done[i] = 0; /* Only the USB 2.0 completions will ever be used. */ diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index fb7a6dc00226..7f9feb5d3846 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -207,7 +207,7 @@ int xhci_reset(struct xhci_hcd *xhci) ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, 10 * 1000 * 1000); - for (i = 0; i < 2; ++i) { + for (i = 0; i < 2; i++) { xhci->bus_state[i].port_c_suspend = 0; xhci->bus_state[i].suspended_ports = 0; xhci->bus_state[i].resuming_ports = 0; @@ -1808,7 +1808,7 @@ static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *vir slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK); /* Endpoint 0 is always valid */ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1)); - for (i = 1; i < 31; ++i) { + for (i = 1; i < 31; i++) { ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i); ep_ctx->ep_info = 0; ep_ctx->ep_info2 = 0; @@ -2780,7 +2780,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info))); /* Free any rings that were dropped, but not changed. */ - for (i = 1; i < 31; ++i) { + for (i = 1; i < 31; i++) { if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) && !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) { xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); @@ -2792,7 +2792,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) * Install any rings for completely new endpoints or changed endpoints, * and free or cache any old rings from changed endpoints. */ - for (i = 1; i < 31; ++i) { + for (i = 1; i < 31; i++) { if (!virt_dev->eps[i].new_ring) continue; /* Only cache or free the old ring if it exists. @@ -2826,7 +2826,7 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); virt_dev = xhci->devs[udev->slot_id]; /* Free any rings allocated for added endpoints */ - for (i = 0; i < 31; ++i) { + for (i = 0; i < 31; i++) { if (virt_dev->eps[i].new_ring) { xhci_ring_free(xhci, virt_dev->eps[i].new_ring); virt_dev->eps[i].new_ring = NULL; @@ -3532,7 +3532,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Everything but endpoint 0 is disabled, so free or cache the rings. */ last_freed_endpoint = 1; - for (i = 1; i < 31; ++i) { + for (i = 1; i < 31; i++) { struct xhci_virt_ep *ep = &virt_dev->eps[i]; if (ep->ep_state & EP_HAS_STREAMS) { @@ -3608,7 +3608,7 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) virt_dev = xhci->devs[udev->slot_id]; /* Stop any wayward timer functions (which may grab the lock) */ - for (i = 0; i < 31; ++i) { + for (i = 0; i < 31; i++) { virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING; del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); }