From: Tony Lindgren <tony@atomide.com>
Date: Mon, 6 Mar 2017 04:11:58 +0000 (-0800)
Subject: ARM: dts: omap4-droid4: Add GPIO poweroff
X-Git-Tag: v4.12-rc1~56^2~27^2^2~6
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9946f937d482abeb697dde44a58a8d821f45df0c;p=karo-tx-linux.git

ARM: dts: omap4-droid4: Add GPIO poweroff

Droid 4 has a GPIO line that we can use with CONFIG_POWER_RESET_GPIO.
It is probably connected to the CPCAP PMIC, and seems to power down
the whole device taking power consumption to zero based on what
I measured.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index ed07f39d61a2..1830f747354f 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -27,6 +27,14 @@
 		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
 	};
 
+	/* Poweroff GPIO probably connected to CPCAP */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_gpio>;
+		pinctrl-names = "default";
+		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
+	};
+
 	/* This is probably coming straight from the battery.. */
 	wl12xx_vmmc: regulator-wl12xx {
 		compatible = "regulator-fixed";
@@ -226,6 +234,14 @@
 };
 
 &omap4_pmx_core {
+
+	/* gpmc_ncs0.gpio_50 */
+	poweroff_gpio: pinmux_poweroff_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
 	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
 		/* gpio_60 */
 		pinctrl-single,pins = <