From: Michal Kazior Date: Tue, 1 Mar 2016 12:16:11 +0000 (+0100) Subject: ath10k: change htt tx desc/qcache peer limit config X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=99ad1cba313fc86797bca55d64e7c6c809098511;p=linux-beck.git ath10k: change htt tx desc/qcache peer limit config The number of HTT Tx descriptors and qcache peer limit aren't hw-specific. In fact they are firmware specific and should not be placed in hw_params. The QCA4019 limits were submitted with the peer flow control firmware only and to my understanding there's no non-peer-flow-ctrl QCA4019 firmware. However QCA99X0 is planned to run firmware supporting the feature as well. Therefore this patch enables QCA99X0 to use 2500 tx descriptors whenever possible instead of just 1424. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 6f606f8fce25..2389c0713c13 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -156,8 +156,6 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .channel_counters_freq_hz = 150000, .max_probe_resp_desc_thres = 24, .hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE, - .num_msdu_desc = 1424, - .qcache_active_peers = 50, .tx_chain_mask = 0xf, .rx_chain_mask = 0xf, .max_spatial_stream = 4, @@ -217,8 +215,6 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .channel_counters_freq_hz = 125000, .max_probe_resp_desc_thres = 24, .hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE, - .num_msdu_desc = 2500, - .qcache_active_peers = 35, .tx_chain_mask = 0x3, .rx_chain_mask = 0x3, .max_spatial_stream = 2, @@ -1538,9 +1534,14 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar) ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS; ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS; ar->num_tids = TARGET_10_4_TGT_NUM_TIDS; - ar->htt.max_num_pending_tx = ar->hw_params.num_msdu_desc; ar->fw_stats_req_mask = WMI_STAT_PEER; ar->max_spatial_stream = ar->hw_params.max_spatial_stream; + + if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL, + ar->fw_features)) + ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC_PFC; + else + ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC; break; case ATH10K_FW_WMI_OP_VERSION_UNSET: case ATH10K_FW_WMI_OP_VERSION_MAX: diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 3050e497fd22..23ba03fb7a5f 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -692,8 +692,6 @@ struct ath10k { /* The padding bytes's location is different on various chips */ enum ath10k_hw_4addr_pad hw_4addr_pad; - u32 num_msdu_desc; - u32 qcache_active_peers; u32 tx_chain_mask; u32 rx_chain_mask; u32 max_spatial_stream; diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index f0cfbc745c97..1ff617b05010 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -431,10 +431,14 @@ enum ath10k_hw_4addr_pad { #define TARGET_10_4_ACTIVE_PEERS 0 #define TARGET_10_4_NUM_QCACHE_PEERS_MAX 512 +#define TARGET_10_4_QCACHE_ACTIVE_PEERS 50 +#define TARGET_10_4_QCACHE_ACTIVE_PEERS_PFC 35 #define TARGET_10_4_NUM_OFFLOAD_PEERS 0 #define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS 0 #define TARGET_10_4_NUM_PEER_KEYS 2 #define TARGET_10_4_TGT_NUM_TIDS ((TARGET_10_4_NUM_PEERS) * 2) +#define TARGET_10_4_NUM_MSDU_DESC (1024 + 400) +#define TARGET_10_4_NUM_MSDU_DESC_PFC 2500 #define TARGET_10_4_AST_SKID_LIMIT 32 /* 100 ms for video, best-effort, and background */ diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 70261387d1a5..c31b4878cdc6 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4617,10 +4617,16 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work) } if (test_bit(WMI_SERVICE_PEER_CACHING, ar->wmi.svc_map)) { + if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL, + ar->fw_features)) + ar->num_active_peers = TARGET_10_4_QCACHE_ACTIVE_PEERS_PFC + + ar->max_num_vdevs; + else + ar->num_active_peers = TARGET_10_4_QCACHE_ACTIVE_PEERS + + ar->max_num_vdevs; + ar->max_num_peers = TARGET_10_4_NUM_QCACHE_PEERS_MAX + ar->max_num_vdevs; - ar->num_active_peers = ar->hw_params.qcache_active_peers + - ar->max_num_vdevs; ar->num_tids = ar->num_active_peers * 2; ar->max_num_stations = TARGET_10_4_NUM_QCACHE_PEERS_MAX; }