From: Linus Walleij Date: Mon, 13 Sep 2010 12:38:55 +0000 (+0100) Subject: ARM: 6375/1: plat-nomadik: MTU timer trivial bug fix X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=99f76891a33d130776da3b01935d978b1e75fe68;p=linux-beck.git ARM: 6375/1: plat-nomadik: MTU timer trivial bug fix timer0 to 3 are all on mtu block 0, so don't calculate the clock event rate based upon mtu block 1's clock speed. Acked-by: Alessandro Rubini Signed-off-by: Jonas Aaberg Signed-off-by: Linus Walleij Signed-off-by: Russell King --- diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index ea3ca86c5283..d673888af18e 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -131,17 +131,12 @@ void __init nmdk_timer_init(void) { unsigned long rate; struct clk *clk0; - struct clk *clk1; u32 cr; clk0 = clk_get_sys("mtu0", NULL); BUG_ON(IS_ERR(clk0)); - clk1 = clk_get_sys("mtu1", NULL); - BUG_ON(IS_ERR(clk1)); - clk_enable(clk0); - clk_enable(clk1); /* * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: @@ -170,15 +165,8 @@ void __init nmdk_timer_init(void) pr_err("timer: failed to initialize clock source %s\n", nmdk_clksrc.name); - /* Timer 1 is used for events, fix according to rate */ - cr = MTU_CRn_32BITS; - rate = clk_get_rate(clk1); - if (rate > 16 << 20) { - rate /= 16; - cr |= MTU_CRn_PRESCALE_16; - } else { - cr |= MTU_CRn_PRESCALE_1; - } + /* Timer 1 is used for events */ + clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */