From: Vladimir Kondratiev Date: Sun, 15 Feb 2015 12:02:31 +0000 (+0200) Subject: wil6210: remove support for old hardware X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9a5511b58b25aaf4cba61d9144229d2987a5135c;p=linux-beck.git wil6210: remove support for old hardware Hardware older than Sparrow B0 obsolete. There is no WiFi product that uses this hardware. Recent firmware does not support it either. Remove driver support. Signed-off-by: Vladimir Kondratiev Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/wil6210/ethtool.c b/drivers/net/wireless/ath/wil6210/ethtool.c index 4c44a82c34d7..0ea695ff98ad 100644 --- a/drivers/net/wireless/ath/wil6210/ethtool.c +++ b/drivers/net/wireless/ath/wil6210/ethtool.c @@ -50,27 +50,19 @@ static int wil_ethtoolops_get_coalesce(struct net_device *ndev, wil_dbg_misc(wil, "%s()\n", __func__); - if (test_bit(hw_capability_advanced_itr_moderation, - wil->hw_capabilities)) { - tx_itr_en = ioread32(wil->csr + - HOSTADDR(RGF_DMA_ITR_TX_CNT_CTL)); - if (tx_itr_en & BIT_DMA_ITR_TX_CNT_CTL_EN) - tx_itr_val = - ioread32(wil->csr + - HOSTADDR(RGF_DMA_ITR_TX_CNT_TRSH)); - - rx_itr_en = ioread32(wil->csr + - HOSTADDR(RGF_DMA_ITR_RX_CNT_CTL)); - if (rx_itr_en & BIT_DMA_ITR_RX_CNT_CTL_EN) - rx_itr_val = - ioread32(wil->csr + - HOSTADDR(RGF_DMA_ITR_RX_CNT_TRSH)); - } else { - rx_itr_en = ioread32(wil->csr + HOSTADDR(RGF_DMA_ITR_CNT_CRL)); - if (rx_itr_en & BIT_DMA_ITR_CNT_CRL_EN) - rx_itr_val = ioread32(wil->csr + - HOSTADDR(RGF_DMA_ITR_CNT_TRSH)); - } + tx_itr_en = ioread32(wil->csr + + HOSTADDR(RGF_DMA_ITR_TX_CNT_CTL)); + if (tx_itr_en & BIT_DMA_ITR_TX_CNT_CTL_EN) + tx_itr_val = + ioread32(wil->csr + + HOSTADDR(RGF_DMA_ITR_TX_CNT_TRSH)); + + rx_itr_en = ioread32(wil->csr + + HOSTADDR(RGF_DMA_ITR_RX_CNT_CTL)); + if (rx_itr_en & BIT_DMA_ITR_RX_CNT_CTL_EN) + rx_itr_val = + ioread32(wil->csr + + HOSTADDR(RGF_DMA_ITR_RX_CNT_TRSH)); cp->tx_coalesce_usecs = tx_itr_val; cp->rx_coalesce_usecs = rx_itr_val; diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index a6f923086f31..d5a651bb800e 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -166,9 +166,16 @@ void wil_unmask_irq(struct wil6210_priv *wil) /* target write operation */ #define W(a, v) do { iowrite32(v, wil->csr + HOSTADDR(a)); wmb(); } while (0) -static -void wil_configure_interrupt_moderation_new(struct wil6210_priv *wil) +void wil_configure_interrupt_moderation(struct wil6210_priv *wil) { + wil_dbg_irq(wil, "%s()\n", __func__); + + /* disable interrupt moderation for monitor + * to get better timestamp precision + */ + if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) + return; + /* Disable and clear tx counter before (re)configuration */ W(RGF_DMA_ITR_TX_CNT_CTL, BIT_DMA_ITR_TX_CNT_CTL_CLR); W(RGF_DMA_ITR_TX_CNT_TRSH, wil->tx_max_burst_duration); @@ -206,42 +213,8 @@ void wil_configure_interrupt_moderation_new(struct wil6210_priv *wil) BIT_DMA_ITR_RX_IDL_CNT_CTL_EXT_TIC_SEL); } -static -void wil_configure_interrupt_moderation_lgc(struct wil6210_priv *wil) -{ - /* disable, use usec resolution */ - W(RGF_DMA_ITR_CNT_CRL, BIT_DMA_ITR_CNT_CRL_CLR); - - wil_info(wil, "set ITR_TRSH = %d usec\n", wil->rx_max_burst_duration); - W(RGF_DMA_ITR_CNT_TRSH, wil->rx_max_burst_duration); - /* start it */ - W(RGF_DMA_ITR_CNT_CRL, - BIT_DMA_ITR_CNT_CRL_EN | BIT_DMA_ITR_CNT_CRL_EXT_TICK); -} - #undef W -void wil_configure_interrupt_moderation(struct wil6210_priv *wil) -{ - wil_dbg_irq(wil, "%s()\n", __func__); - - /* disable interrupt moderation for monitor - * to get better timestamp precision - */ - if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) - return; - - if (test_bit(hw_capability_advanced_itr_moderation, - wil->hw_capabilities)) - wil_configure_interrupt_moderation_new(wil); - else { - /* Advanced interrupt moderation is not available before - * Sparrow v2. Will use legacy interrupt moderation - */ - wil_configure_interrupt_moderation_lgc(wil); - } -} - static irqreturn_t wil6210_irq_rx(int irq, void *cookie) { struct wil6210_priv *wil = cookie; diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index acbbd272a41e..95755a551796 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -516,8 +516,6 @@ static int wil_target_reset(struct wil6210_priv *wil) { int delay = 0; u32 x; - bool is_reset_v2 = test_bit(hw_capability_reset_v2, - wil->hw_capabilities); wil_dbg_misc(wil, "Resetting \"%s\"...\n", wil->hw_name); @@ -533,52 +531,39 @@ static int wil_target_reset(struct wil6210_priv *wil) /* Clear Fw Download notification */ C(RGF_USER_USAGE_6, BIT(0)); - if (is_reset_v2) { - S(RGF_CAF_OSC_CONTROL, BIT_CAF_OSC_XTAL_EN); - /* XTAL stabilization should take about 3ms */ - usleep_range(5000, 7000); - x = R(RGF_CAF_PLL_LOCK_STATUS); - if (!(x & BIT_CAF_OSC_DIG_XTAL_STABLE)) { - wil_err(wil, "Xtal stabilization timeout\n" - "RGF_CAF_PLL_LOCK_STATUS = 0x%08x\n", x); - return -ETIME; - } - /* switch 10k to XTAL*/ - C(RGF_USER_SPARROW_M_4, BIT_SPARROW_M_4_SEL_SLEEP_OR_REF); - /* 40 MHz */ - C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_CAR_AHB_SW_SEL); - - W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x3ff81f); - W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0xf); + S(RGF_CAF_OSC_CONTROL, BIT_CAF_OSC_XTAL_EN); + /* XTAL stabilization should take about 3ms */ + usleep_range(5000, 7000); + x = R(RGF_CAF_PLL_LOCK_STATUS); + if (!(x & BIT_CAF_OSC_DIG_XTAL_STABLE)) { + wil_err(wil, "Xtal stabilization timeout\n" + "RGF_CAF_PLL_LOCK_STATUS = 0x%08x\n", x); + return -ETIME; } + /* switch 10k to XTAL*/ + C(RGF_USER_SPARROW_M_4, BIT_SPARROW_M_4_SEL_SLEEP_OR_REF); + /* 40 MHz */ + C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_CAR_AHB_SW_SEL); + + W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x3ff81f); + W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0xf); W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000); W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F); - W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, - is_reset_v2 ? 0x000000f0 : 0x00000170); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x000000f0); W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FE00); - if (is_reset_v2) { - W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x0); - W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0x0); - } + W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x0); + W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0x0); W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0); W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0); W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0); W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0); - if (is_reset_v2) { - W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000003); - /* reset A2 PCIE AHB */ - W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000); - } else { - W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001); - W(RGF_PCIE_LOS_COUNTER_CTL, BIT(6) | BIT(8)); - W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000); - } + W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000003); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000); /* reset A2 PCIE AHB */ - /* TODO: check order here!!! Erez code is different */ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0); /* wait until device ready. typical time is 20..80 msec */ @@ -592,9 +577,6 @@ static int wil_target_reset(struct wil6210_priv *wil) } } while (!(x & BIT_BL_READY)); - if (!is_reset_v2) - W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8)); - C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD); wil_dbg_misc(wil, "Reset completed in %d ms\n", delay * RST_DELAY); diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index f7c165d35343..25343cffe229 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -39,18 +39,6 @@ void wil_set_capabilities(struct wil6210_priv *wil) bitmap_zero(wil->hw_capabilities, hw_capability_last); switch (rev_id) { - case JTAG_DEV_ID_MARLON_B0: - wil->hw_name = "Marlon B0"; - wil->hw_version = HW_VER_MARLON_B0; - break; - case JTAG_DEV_ID_SPARROW_A0: - wil->hw_name = "Sparrow A0"; - wil->hw_version = HW_VER_SPARROW_A0; - break; - case JTAG_DEV_ID_SPARROW_A1: - wil->hw_name = "Sparrow A1"; - wil->hw_version = HW_VER_SPARROW_A1; - break; case JTAG_DEV_ID_SPARROW_B0: wil->hw_name = "Sparrow B0"; wil->hw_version = HW_VER_SPARROW_B0; @@ -62,13 +50,6 @@ void wil_set_capabilities(struct wil6210_priv *wil) } wil_info(wil, "Board hardware is %s\n", wil->hw_name); - - if (wil->hw_version >= HW_VER_SPARROW_A0) - set_bit(hw_capability_reset_v2, wil->hw_capabilities); - - if (wil->hw_version >= HW_VER_SPARROW_B0) - set_bit(hw_capability_advanced_itr_moderation, - wil->hw_capabilities); } void wil_disable_irq(struct wil6210_priv *wil) @@ -305,7 +286,6 @@ static void wil_pcie_remove(struct pci_dev *pdev) } static const struct pci_device_id wil6210_pcie_ids[] = { - { PCI_DEVICE(0x1ae9, 0x0301) }, { PCI_DEVICE(0x1ae9, 0x0310) }, { PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */ { /* end: all zeroes */ }, diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index cfe43d212e1f..97422e7854d3 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -241,16 +241,10 @@ struct RGF_BL { #define BIT_CAF_OSC_DIG_XTAL_STABLE BIT(0) #define RGF_USER_JTAG_DEV_ID (0x880b34) /* device ID */ - #define JTAG_DEV_ID_MARLON_B0 (0x0612072f) - #define JTAG_DEV_ID_SPARROW_A0 (0x0632072f) - #define JTAG_DEV_ID_SPARROW_A1 (0x1632072f) #define JTAG_DEV_ID_SPARROW_B0 (0x2632072f) enum { HW_VER_UNKNOWN, - HW_VER_MARLON_B0, /* JTAG_DEV_ID_MARLON_B0 */ - HW_VER_SPARROW_A0, /* JTAG_DEV_ID_SPARROW_A0 */ - HW_VER_SPARROW_A1, /* JTAG_DEV_ID_SPARROW_A1 */ HW_VER_SPARROW_B0, /* JTAG_DEV_ID_SPARROW_B0 */ }; @@ -494,8 +488,6 @@ enum { }; enum { - hw_capability_reset_v2 = 0, - hw_capability_advanced_itr_moderation = 1, hw_capability_last };