From: Mihail Atanassov Date: Wed, 15 Feb 2017 14:00:15 +0000 (+0000) Subject: drm: mali-dp: Remove mclk rate management X-Git-Tag: v4.11-rc3~19^2~2^2~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9a8b0a230aca55ee142fd76f4765f1da1799da93;p=karo-tx-linux.git drm: mali-dp: Remove mclk rate management The rate of mclk depends on the use-case. If no downscaling is required, then mclk == pxlclk is a valid option; with downscaling however, the rate at which mclk runs determines how much a plane can be downscaled before composition. This is a system integration + power management issue that is more suited to firmware rather than this driver. Signed-off-by: Mihail Atanassov Signed-off-by: Liviu Dudau --- diff --git a/drivers/gpu/drm/arm/malidp_crtc.c b/drivers/gpu/drm/arm/malidp_crtc.c index 08e6a71f5d05..294b53697334 100644 --- a/drivers/gpu/drm/arm/malidp_crtc.c +++ b/drivers/gpu/drm/arm/malidp_crtc.c @@ -63,8 +63,7 @@ static void malidp_crtc_enable(struct drm_crtc *crtc) clk_prepare_enable(hwdev->pxlclk); - /* mclk needs to be set to the same or higher rate than pxlclk */ - clk_set_rate(hwdev->mclk, crtc->state->adjusted_mode.crtc_clock * 1000); + /* We rely on firmware to set mclk to a sensible level. */ clk_set_rate(hwdev->pxlclk, crtc->state->adjusted_mode.crtc_clock * 1000); hwdev->modeset(hwdev, &vm);