From: Jacob Keller Date: Wed, 24 Jun 2015 20:34:50 +0000 (-0700) Subject: fm10k: fix iov_msg_mac_vlan_pf VID checks X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9adbac599a71bc25a2617850ffcaa4388dc5c20d;p=linux-beck.git fm10k: fix iov_msg_mac_vlan_pf VID checks The VF will send a message to request multicast addresses with the default VID. In the current code, if the PF has statically assigned a VLAN to a VF, then the VF will not get the multicast addresses. Fix up all of the various VLAN messages to use identical checks (since each check was different). Also use set as a variable, so that it simplifies our check for whether VLAN matches the pf_vid. The new logic will allow set of a VLAN if it is zero, automatically converting to the default VID. Otherwise it will allow setting the PF VID, or any VLAN if PF has not statically assigned a VLAN. This is consistent behavior, and allows VF to request either 0 or the default_vid without silently failing. Note that we need the check for zero since VFs might not get the default VID message in time to actually request non-zero VLANs. Signed-off-by: Jacob Keller Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c index d806d87a6192..8c0bdc4e4edd 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c @@ -1154,6 +1154,24 @@ s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 **results, return hw->iov.ops.assign_int_moderator(hw, vf_idx); } +/** + * fm10k_iov_select_vid - Select correct default VID + * @hw: Pointer to hardware structure + * @vid: VID to correct + * + * Will report an error if VID is out of range. For VID = 0, it will return + * either the pf_vid or sw_vid depending on which one is set. + */ +static inline s32 fm10k_iov_select_vid(struct fm10k_vf_info *vf_info, u16 vid) +{ + if (!vid) + return vf_info->pf_vid ? vf_info->pf_vid : vf_info->sw_vid; + else if (vf_info->pf_vid && vid != vf_info->pf_vid) + return FM10K_ERR_PARAM; + else + return vid; +} + /** * fm10k_iov_msg_mac_vlan_pf - Message handler for MAC/VLAN request from VF * @hw: Pointer to hardware structure @@ -1168,9 +1186,10 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, struct fm10k_mbx_info *mbx) { struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; - int err = 0; u8 mac[ETH_ALEN]; u32 *result; + int err = 0; + bool set; u16 vlan; u32 vid; @@ -1186,19 +1205,21 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, if (err) return err; - /* if VLAN ID is 0, set the default VLAN ID instead of 0 */ - if (!vid || (vid == FM10K_VLAN_CLEAR)) { - if (vf_info->pf_vid) - vid |= vf_info->pf_vid; - else - vid |= vf_info->sw_vid; - } else if (vid != vf_info->pf_vid) { + /* verify upper 16 bits are zero */ + if (vid >> 16) return FM10K_ERR_PARAM; - } + + set = !(vid & FM10K_VLAN_CLEAR); + vid &= ~FM10K_VLAN_CLEAR; + + err = fm10k_iov_select_vid(vf_info, vid); + if (err < 0) + return err; + else + vid = err; /* update VSI info for VF in regards to VLAN table */ - err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, - !(vid & FM10K_VLAN_CLEAR)); + err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set); } if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) { @@ -1214,19 +1235,18 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, memcmp(mac, vf_info->mac, ETH_ALEN)) return FM10K_ERR_PARAM; - /* if VLAN ID is 0, set the default VLAN ID instead of 0 */ - if (!vlan || (vlan == FM10K_VLAN_CLEAR)) { - if (vf_info->pf_vid) - vlan |= vf_info->pf_vid; - else - vlan |= vf_info->sw_vid; - } else if (vf_info->pf_vid) { - return FM10K_ERR_PARAM; - } + set = !(vlan & FM10K_VLAN_CLEAR); + vlan &= ~FM10K_VLAN_CLEAR; + + err = fm10k_iov_select_vid(vf_info, vlan); + if (err < 0) + return err; + else + vlan = err; /* notify switch of request for new unicast address */ - err = hw->mac.ops.update_uc_addr(hw, vf_info->glort, mac, vlan, - !(vlan & FM10K_VLAN_CLEAR), 0); + err = hw->mac.ops.update_uc_addr(hw, vf_info->glort, + mac, vlan, set, 0); } if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) { @@ -1241,19 +1261,18 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED)) return FM10K_ERR_PARAM; - /* if VLAN ID is 0, set the default VLAN ID instead of 0 */ - if (!vlan || (vlan == FM10K_VLAN_CLEAR)) { - if (vf_info->pf_vid) - vlan |= vf_info->pf_vid; - else - vlan |= vf_info->sw_vid; - } else if (vf_info->pf_vid) { - return FM10K_ERR_PARAM; - } + set = !(vlan & FM10K_VLAN_CLEAR); + vlan &= ~FM10K_VLAN_CLEAR; + + err = fm10k_iov_select_vid(vf_info, vlan); + if (err < 0) + return err; + else + vlan = err; /* notify switch of request for new multicast address */ - err = hw->mac.ops.update_mc_addr(hw, vf_info->glort, mac, vlan, - !(vlan & FM10K_VLAN_CLEAR)); + err = hw->mac.ops.update_mc_addr(hw, vf_info->glort, + mac, vlan, set); } return err;