From: Finn Thain Date: Mon, 10 Oct 2016 04:46:53 +0000 (-0400) Subject: scsi: ncr5380: Suppress unhelpful "interrupt without IRQ bit" message X-Git-Tag: v4.10-rc1~128^2~230 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9af9fecb9e5380c778e89501aefe8bc779783c01;p=karo-tx-linux.git scsi: ncr5380: Suppress unhelpful "interrupt without IRQ bit" message If a NCR5380 host instance ends up on a shared interrupt line then this printk will be a problem. It is already a problem on some Mac models: when testing mac_scsi on a PowerBook 180 I found that PDMA transfers (but not PIO transfers) cause the message to be logged. These spurious interrupts don't appear to come from the DRQ signal from the 5380. And they don't happen at all on the Mac LC III. A comment in the NetBSD source code mentions this mystery. Testing seems to show that we can safely ignore these interrupts. Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke Tested-by: Ondrej Zary Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 7d4e135a36cb..d849ffa378b1 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -995,7 +995,7 @@ static irqreturn_t __maybe_unused NCR5380_intr(int irq, void *dev_id) } handled = 1; } else { - shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n"); + dsprintk(NDEBUG_INTR, instance, "interrupt without IRQ bit\n"); #ifdef SUN3_SCSI_VME dregs->csr |= CSR_DMA_ENABLE; #endif