From: Roger Quadros Date: Thu, 5 Mar 2015 13:32:42 +0000 (+0200) Subject: ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9b5580854fd75614f817773e96977d07fee8fc4b;p=linux-beck.git ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl Rev.F onwards ball G19 (dcan1_rx) is used as a GPIO for some other function so don't include it in DCAN pinctrl node. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 3290a96ba586..ddef593c380b 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -264,7 +264,6 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; @@ -272,7 +271,6 @@ dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ 0x418 (MUX_MODE15) /* wakeup0.off */ >; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index e0264d0bf7b9..42ee09ae4d79 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -120,7 +120,6 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; @@ -128,7 +127,6 @@ dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ 0x418 (MUX_MODE15) /* wakeup0.off */ >; };