From: Roland Vossen Date: Fri, 2 Sep 2011 14:00:35 +0000 (+0200) Subject: staging: brcm80211: cleaned up more softmac macro's X-Git-Tag: next-20111004~7^2~354 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9b5795a7624153dd78e03f0e1c99b2d54cee5b8c;p=karo-tx-linux.git staging: brcm80211: cleaned up more softmac macro's Substituted/removed macro's. Reported-by: Johannes Berg Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Roland Vossen Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/brcm80211/brcmsmac/main.c b/drivers/staging/brcm80211/brcmsmac/main.c index 9e73b429cf42..fff3ba9dc5ba 100644 --- a/drivers/staging/brcm80211/brcmsmac/main.c +++ b/drivers/staging/brcm80211/brcmsmac/main.c @@ -267,6 +267,20 @@ #define APHY_SLOT_TIME 9 #define BPHY_SLOT_TIME 20 +#define WL_SPURAVOID_OFF 0 +#define WL_SPURAVOID_ON1 1 +#define WL_SPURAVOID_ON2 2 + +/* + * 32 SSID chars, max of 4 chars for each SSID char "\xFF", plus NULL. + */ +#define SSID_FMT_BUF_LEN ((4 * IEEE80211_MAX_SSID_LEN) + 1) + +/* defaults for the HT (MIMO) bss */ +#define HT_CAP (IEEE80211_HT_CAP_SM_PS |\ + IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD |\ + IEEE80211_HT_CAP_MAX_AMSDU | IEEE80211_HT_CAP_DSSSCCK40) + /* * The following table lists the buffer memory allocated to xmt fifos in HW. * the size is in units of 256bytes(one block), total size is HW dependent @@ -361,6 +375,10 @@ #define IS_MBAND_UNLOCKED(wlc) \ ((wlc->pub->_nbands > 1) && !(wlc)->bandlocked) +#define CHSPEC_WLC_BW(chanspec) (CHSPEC_IS40(chanspec) ? BRCMS_40_MHZ : \ + CHSPEC_IS20(chanspec) ? BRCMS_20_MHZ : \ + BRCMS_10_MHZ) + /* dup state between BMAC(struct brcms_hardware) and HIGH(struct brcms_c_info) driver */ struct brcms_b_state { diff --git a/drivers/staging/brcm80211/brcmsmac/main.h b/drivers/staging/brcm80211/brcmsmac/main.h index e8a854bfb12d..047c422174d9 100644 --- a/drivers/staging/brcm80211/brcmsmac/main.h +++ b/drivers/staging/brcm80211/brcmsmac/main.h @@ -23,7 +23,6 @@ #include "types.h" #include "d11.h" -#define MA_WINDOW_SZ 8 /* moving average window size */ #define INVCHANNEL 255 /* invalid channel */ /* max # brcms_c_module_register() calls */ diff --git a/drivers/staging/brcm80211/brcmsmac/otp.c b/drivers/staging/brcm80211/brcmsmac/otp.c index 1e0093c71ca3..05c78c7f33c7 100644 --- a/drivers/staging/brcm80211/brcmsmac/otp.c +++ b/drivers/staging/brcm80211/brcmsmac/otp.c @@ -64,6 +64,9 @@ #define MAXNUMRDES 9 /* Maximum OTP redundancy entries */ +/* Fixed size subregions sizes in words */ +#define OTPGU_CI_SZ 2 + /* OTP function struct */ struct otp_fn_s { int (*size)(struct otpinfo *oi); @@ -111,8 +114,6 @@ static struct otpinfo otpinfo; * */ -#define HWSW_RGN(rgn) (((rgn) == OTP_HW_RGN) ? "h/w" : "s/w") - /* OTP layout */ /* CC revs 21, 24 and 27 OTP General Use Region word offset */ #define REVA4_OTPGU_BASE 12 diff --git a/drivers/staging/brcm80211/brcmsmac/otp.h b/drivers/staging/brcm80211/brcmsmac/otp.h index 938100e25482..bf2f76f96ac7 100644 --- a/drivers/staging/brcm80211/brcmsmac/otp.h +++ b/drivers/staging/brcm80211/brcmsmac/otp.h @@ -30,12 +30,6 @@ /* OTP Size */ #define OTP_SZ_MAX (6144/8) /* maximum bytes in one CIS */ -/* Fixed size subregions sizes in words */ -#define OTPGU_CI_SZ 2 - -/* OTP usage */ -#define OTP4325_FM_DISABLED_OFFSET 188 - struct otpinfo; /* Exported functions */ diff --git a/drivers/staging/brcm80211/brcmsmac/pmu.h b/drivers/staging/brcm80211/brcmsmac/pmu.h index 0c7e48c4bcd8..2917e6ff8626 100644 --- a/drivers/staging/brcm80211/brcmsmac/pmu.h +++ b/drivers/staging/brcm80211/brcmsmac/pmu.h @@ -19,19 +19,6 @@ #define _BRCM_PMU_H_ #include "types.h" -/* - * LDO selections used in si_pmu_set_ldo_voltage - */ -#define SET_LDO_VOLTAGE_LDO1 1 -#define SET_LDO_VOLTAGE_LDO2 2 -#define SET_LDO_VOLTAGE_LDO3 3 -#define SET_LDO_VOLTAGE_PAREF 4 -#define SET_LDO_VOLTAGE_CLDO_PWM 5 -#define SET_LDO_VOLTAGE_CLDO_BURST 6 -#define SET_LDO_VOLTAGE_CBUCK_PWM 7 -#define SET_LDO_VOLTAGE_CBUCK_BURST 8 -#define SET_LDO_VOLTAGE_LNLDO1 9 -#define SET_LDO_VOLTAGE_LNLDO2_SEL 10 extern u16 si_pmu_fast_pwrup_delay(struct si_pub *sih); extern void si_pmu_sprom_enable(struct si_pub *sih, bool enable); diff --git a/drivers/staging/brcm80211/brcmsmac/pub.h b/drivers/staging/brcm80211/brcmsmac/pub.h index 5bca2fbc6d4e..ab2fb119f235 100644 --- a/drivers/staging/brcm80211/brcmsmac/pub.h +++ b/drivers/staging/brcm80211/brcmsmac/pub.h @@ -40,10 +40,6 @@ #define BRCMS_20_MHZ 20 /* 20Mhz nphy channel bandwidth */ #define BRCMS_40_MHZ 40 /* 40Mhz nphy channel bandwidth */ -#define CHSPEC_WLC_BW(chanspec) (CHSPEC_IS40(chanspec) ? BRCMS_40_MHZ : \ - CHSPEC_IS20(chanspec) ? BRCMS_20_MHZ : \ - BRCMS_10_MHZ) - #define BRCMS_RSSI_MINVAL -200 /* Low value, e.g. for forcing roam */ #define BRCMS_RSSI_NO_SIGNAL -91 /* NDIS RSSI link quality cutoffs */ #define BRCMS_RSSI_VERY_LOW -80 /* Very low quality cutoffs */ @@ -52,13 +48,6 @@ #define BRCMS_RSSI_VERY_GOOD -58 /* Very good quality cutoffs */ #define BRCMS_RSSI_EXCELLENT -57 /* Excellent quality cutoffs */ -/* macro to perform PHY -> D11 PHY TYPE, currently 1:1 */ -#define BRCMS_PHYTYPE(_x) (_x) - -#define MA_WINDOW_SZ 8 /* moving average window size */ - -#define BRCMS_SNR_INVALID 0 /* invalid SNR value */ - /* a large TX Power as an init value to factor out of min() calculations, * keep low enough to fit in an s8, units are .25 dBm */ @@ -87,9 +76,6 @@ /* driver's default tx antenna setting */ #define ANT_TX_DEF 3 -/* use all available core for transmit */ -#define TXCORE_POLICY_ALL 0x1 - /* Tx Chain values */ /* def bitmap of txchain */ #define TXCHAIN_DEF 0x1 @@ -113,15 +99,9 @@ #define ANTSWITCH_TYPE_3 3 #define RXBUFSZ PKTBUFSZ -/* aid bitmap size in bytes */ -#define AIDMAPSZ (roundup(MAXSCB, NBBY)/NBBY) #define MAX_STREAMS_SUPPORTED 4 /* max number of streams supported */ -#define WL_SPURAVOID_OFF 0 -#define WL_SPURAVOID_ON1 1 -#define WL_SPURAVOID_ON2 2 - struct brcms_tunables { int ntxd; /* size of tx descriptor table */ int nrxd; /* size of rx descriptor table */ @@ -158,24 +138,11 @@ struct rsn_parms { u8 PAD[4]; /* padding for future growth */ }; -/* - * 32 SSID chars, max of 4 chars for each SSID char "\xFF", plus NULL. - */ -#define SSID_FMT_BUF_LEN ((4 * IEEE80211_MAX_SSID_LEN) + 1) - -#define RSN_FLAGS_SUPPORTED 0x1 /* Flag for rsn_params */ -#define RSN_FLAGS_PREAUTH 0x2 /* Flag for WPA2 rsn_params */ - /* All the HT-specific default advertised capabilities (including AMPDU) * should be grouped here at one place */ #define AMPDU_DEF_MPDU_DENSITY 6 /* default mpdu density (110 ==> 4us) */ -/* defaults for the HT (MIMO) bss */ -#define HT_CAP (IEEE80211_HT_CAP_SM_PS |\ - IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD |\ - IEEE80211_HT_CAP_MAX_AMSDU | IEEE80211_HT_CAP_DSSSCCK40) - /* wlc internal bss_info */ struct brcms_bss_info { u8 BSSID[ETH_ALEN]; /* network BSSID */ @@ -202,22 +169,6 @@ struct brcms_bss_info { u8 wpacfg; /* wpa config index */ }; -/* IOVar flags for common error checks */ -#define IOVF_MFG (1<<3) /* flag for mfgtest iovars */ -#define IOVF_WHL (1<<4) /* value must be whole (0-max) */ -#define IOVF_NTRL (1<<5) /* value must be natural (1-max) */ - -#define IOVF_SET_UP (1<<6) /* set requires driver be up */ -#define IOVF_SET_DOWN (1<<7) /* set requires driver be down */ -#define IOVF_SET_CLK (1<<8) /* set requires core clock */ -#define IOVF_SET_BAND (1<<9) /* set requires fixed band */ - -#define IOVF_GET_UP (1<<10) /* get requires driver be up */ -#define IOVF_GET_DOWN (1<<11) /* get requires driver be down */ -#define IOVF_GET_CLK (1<<12) /* get requires core clock */ -#define IOVF_GET_BAND (1<<13) /* get requires fixed band */ -#define IOVF_OPEN_ALLOW (1<<14) /* set allowed iovar for opensrc */ - #define MAC80211_PROMISC_BCNS (1 << 0) #define MAC80211_SCAN (1 << 1)