From: Ingo Molnar Date: Tue, 17 Feb 2009 22:12:48 +0000 (+0100) Subject: x86, apic: separate 32-bit setup functionality out of apic_32.c X-Git-Tag: v2.6.30-rc1~211^2~43^6~5 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9be1b56a3e718aa998772019c57c398dbb19e258;p=karo-tx-linux.git x86, apic: separate 32-bit setup functionality out of apic_32.c Impact: build fix, cleanup A couple of arch setup callbacks were mistakenly in apic_32.c, breaking the build. Also simplify the code a bit. Signed-off-by: Ingo Molnar --- diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index c70537d8c156..de5657c039e9 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -63,7 +63,7 @@ obj-$(CONFIG_SMP) += setup_percpu.o obj-$(CONFIG_X86_64_SMP) += tsc_sync.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o -obj-$(CONFIG_X86_LOCAL_APIC) += apic/ +obj-y += apic/ obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile index 97f558db5c31..da7b7b9f8bd8 100644 --- a/arch/x86/kernel/apic/Makefile +++ b/arch/x86/kernel/apic/Makefile @@ -2,10 +2,9 @@ # Makefile for local APIC drivers and for the IO-APIC code # -obj-y := apic.o probe_$(BITS).o ipi.o nmi.o +obj-$(CONFIG_X86_LOCAL_APIC) += apic.o probe_$(BITS).o ipi.o nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic.o obj-$(CONFIG_SMP) += ipi.o -obj-$ ifeq ($(CONFIG_X86_64),y) obj-y += apic_flat_64.o diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index 5fa48332c5c8..c9ec90742e9f 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -47,7 +47,22 @@ int no_broadcast = DEFAULT_SEND_IPI; -#ifdef CONFIG_X86_LOCAL_APIC +static __init int no_ipi_broadcast(char *str) +{ + get_option(&str, &no_broadcast); + pr_info("Using %s mode\n", + no_broadcast ? "No IPI Broadcast" : "IPI Broadcast"); + return 1; +} +__setup("no_ipi_broadcast=", no_ipi_broadcast); + +static int __init print_ipi_mode(void) +{ + pr_info("Using IPI %s mode\n", + no_broadcast ? "No-Shortcut" : "Shortcut"); + return 0; +} +late_initcall(print_ipi_mode); void default_setup_apic_routing(void) { @@ -279,146 +294,3 @@ int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id) } return 0; } - -#endif /* CONFIG_X86_LOCAL_APIC */ - -/** - * pre_intr_init_hook - initialisation prior to setting up interrupt vectors - * - * Description: - * Perform any necessary interrupt initialisation prior to setting up - * the "ordinary" interrupt call gates. For legacy reasons, the ISA - * interrupts should be initialised here if the machine emulates a PC - * in any way. - **/ -void __init pre_intr_init_hook(void) -{ - if (x86_quirks->arch_pre_intr_init) { - if (x86_quirks->arch_pre_intr_init()) - return; - } - init_ISA_irqs(); -} - -/** - * intr_init_hook - post gate setup interrupt initialisation - * - * Description: - * Fill in any interrupts that may have been left out by the general - * init_IRQ() routine. interrupts having to do with the machine rather - * than the devices on the I/O bus (like APIC interrupts in intel MP - * systems) are started here. - **/ -void __init intr_init_hook(void) -{ - if (x86_quirks->arch_intr_init) { - if (x86_quirks->arch_intr_init()) - return; - } -} - -/** - * pre_setup_arch_hook - hook called prior to any setup_arch() execution - * - * Description: - * generally used to activate any machine specific identification - * routines that may be needed before setup_arch() runs. On Voyager - * this is used to get the board revision and type. - **/ -void __init pre_setup_arch_hook(void) -{ -} - -/** - * trap_init_hook - initialise system specific traps - * - * Description: - * Called as the final act of trap_init(). Used in VISWS to initialise - * the various board specific APIC traps. - **/ -void __init trap_init_hook(void) -{ - if (x86_quirks->arch_trap_init) { - if (x86_quirks->arch_trap_init()) - return; - } -} - -static struct irqaction irq0 = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL, - .mask = CPU_MASK_NONE, - .name = "timer" -}; - -/** - * pre_time_init_hook - do any specific initialisations before. - * - **/ -void __init pre_time_init_hook(void) -{ - if (x86_quirks->arch_pre_time_init) - x86_quirks->arch_pre_time_init(); -} - -/** - * time_init_hook - do any specific initialisations for the system timer. - * - * Description: - * Must plug the system timer interrupt source at HZ into the IRQ listed - * in irq_vectors.h:TIMER_IRQ - **/ -void __init time_init_hook(void) -{ - if (x86_quirks->arch_time_init) { - /* - * A nonzero return code does not mean failure, it means - * that the architecture quirk does not want any - * generic (timer) setup to be performed after this: - */ - if (x86_quirks->arch_time_init()) - return; - } - - irq0.mask = cpumask_of_cpu(0); - setup_irq(0, &irq0); -} - -#ifdef CONFIG_MCA -/** - * mca_nmi_hook - hook into MCA specific NMI chain - * - * Description: - * The MCA (Microchannel Architecture) has an NMI chain for NMI sources - * along the MCA bus. Use this to hook into that chain if you will need - * it. - **/ -void mca_nmi_hook(void) -{ - /* - * If I recall correctly, there's a whole bunch of other things that - * we can do to check for NMI problems, but that's all I know about - * at the moment. - */ - pr_warning("NMI generated from unknown source!\n"); -} -#endif - -static __init int no_ipi_broadcast(char *str) -{ - get_option(&str, &no_broadcast); - pr_info("Using %s mode\n", - no_broadcast ? "No IPI Broadcast" : "IPI Broadcast"); - return 1; -} -__setup("no_ipi_broadcast=", no_ipi_broadcast); - -static int __init print_ipi_mode(void) -{ - pr_info("Using IPI %s mode\n", - no_broadcast ? "No-Shortcut" : "Shortcut"); - return 0; -} - -late_initcall(print_ipi_mode); - diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 6b588d6b3889..ebef80055795 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -985,4 +985,128 @@ void __init setup_arch(char **cmdline_p) #endif } +#ifdef CONFIG_X86_32 + +/** + * pre_intr_init_hook - initialisation prior to setting up interrupt vectors + * + * Description: + * Perform any necessary interrupt initialisation prior to setting up + * the "ordinary" interrupt call gates. For legacy reasons, the ISA + * interrupts should be initialised here if the machine emulates a PC + * in any way. + **/ +void __init pre_intr_init_hook(void) +{ + if (x86_quirks->arch_pre_intr_init) { + if (x86_quirks->arch_pre_intr_init()) + return; + } + init_ISA_irqs(); +} + +/** + * intr_init_hook - post gate setup interrupt initialisation + * + * Description: + * Fill in any interrupts that may have been left out by the general + * init_IRQ() routine. interrupts having to do with the machine rather + * than the devices on the I/O bus (like APIC interrupts in intel MP + * systems) are started here. + **/ +void __init intr_init_hook(void) +{ + if (x86_quirks->arch_intr_init) { + if (x86_quirks->arch_intr_init()) + return; + } +} + +/** + * pre_setup_arch_hook - hook called prior to any setup_arch() execution + * + * Description: + * generally used to activate any machine specific identification + * routines that may be needed before setup_arch() runs. On Voyager + * this is used to get the board revision and type. + **/ +void __init pre_setup_arch_hook(void) +{ +} + +/** + * trap_init_hook - initialise system specific traps + * + * Description: + * Called as the final act of trap_init(). Used in VISWS to initialise + * the various board specific APIC traps. + **/ +void __init trap_init_hook(void) +{ + if (x86_quirks->arch_trap_init) { + if (x86_quirks->arch_trap_init()) + return; + } +} + +static struct irqaction irq0 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL, + .mask = CPU_MASK_NONE, + .name = "timer" +}; + +/** + * pre_time_init_hook - do any specific initialisations before. + * + **/ +void __init pre_time_init_hook(void) +{ + if (x86_quirks->arch_pre_time_init) + x86_quirks->arch_pre_time_init(); +} + +/** + * time_init_hook - do any specific initialisations for the system timer. + * + * Description: + * Must plug the system timer interrupt source at HZ into the IRQ listed + * in irq_vectors.h:TIMER_IRQ + **/ +void __init time_init_hook(void) +{ + if (x86_quirks->arch_time_init) { + /* + * A nonzero return code does not mean failure, it means + * that the architecture quirk does not want any + * generic (timer) setup to be performed after this: + */ + if (x86_quirks->arch_time_init()) + return; + } + + irq0.mask = cpumask_of_cpu(0); + setup_irq(0, &irq0); +} + +#ifdef CONFIG_MCA +/** + * mca_nmi_hook - hook into MCA specific NMI chain + * + * Description: + * The MCA (Microchannel Architecture) has an NMI chain for NMI sources + * along the MCA bus. Use this to hook into that chain if you will need + * it. + **/ +void mca_nmi_hook(void) +{ + /* + * If I recall correctly, there's a whole bunch of other things that + * we can do to check for NMI problems, but that's all I know about + * at the moment. + */ + pr_warning("NMI generated from unknown source!\n"); +} +#endif /* CONFIG_MCA */ +#endif /* CONFIG_X86_32 */