From: Daniel Vetter Date: Tue, 30 Sep 2014 08:56:38 +0000 (+0200) Subject: drm/i915: Extract intel_runtime_pm.c X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9c065a7d5b679e7fabe3cace4faadb283f2b0c1f;p=linux-beck.git drm/i915: Extract intel_runtime_pm.c Geez is the audio hack ugly. Signed-off-by: Daniel Vetter Reviewed-by: Imre Deak [danvet: Rebased on top of the skl patches.] Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 2d8317d36e09..3a6bce047f6f 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -11,7 +11,9 @@ i915-y := i915_drv.o \ i915_params.o \ i915_suspend.o \ i915_sysfs.o \ - intel_pm.o + intel_pm.o \ + intel_runtime_pm.o + i915-$(CONFIG_COMPAT) += i915_ioc32.o i915-$(CONFIG_DEBUG_FS) += i915_debugfs.o diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index f14f456e08f9..9d2ee70d51e4 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1081,6 +1081,27 @@ extern struct drm_display_mode *intel_find_panel_downclock( struct drm_display_mode *fixed_mode, struct drm_connector *connector); +/* intel_runtime_pm.c */ +int intel_power_domains_init(struct drm_i915_private *); +void intel_power_domains_remove(struct drm_i915_private *); +void intel_power_domains_init_hw(struct drm_i915_private *dev_priv); +void intel_init_runtime_pm(struct drm_i915_private *dev_priv); +void intel_fini_runtime_pm(struct drm_i915_private *dev_priv); + +bool intel_display_power_enabled(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain); +bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain); +void intel_display_power_get(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain); +void intel_display_power_put(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain); +void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv); +void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv); +void intel_runtime_pm_get(struct drm_i915_private *dev_priv); +void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv); +void intel_runtime_pm_put(struct drm_i915_private *dev_priv); + /* intel_pm.c */ void intel_init_clock_gating(struct drm_device *dev); void intel_suspend_hw(struct drm_device *dev); @@ -1098,17 +1119,6 @@ bool intel_fbc_enabled(struct drm_device *dev); void intel_update_fbc(struct drm_device *dev); void intel_gpu_ips_init(struct drm_i915_private *dev_priv); void intel_gpu_ips_teardown(void); -int intel_power_domains_init(struct drm_i915_private *); -void intel_power_domains_remove(struct drm_i915_private *); -bool intel_display_power_enabled(struct drm_i915_private *dev_priv, - enum intel_display_power_domain domain); -bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv, - enum intel_display_power_domain domain); -void intel_display_power_get(struct drm_i915_private *dev_priv, - enum intel_display_power_domain domain); -void intel_display_power_put(struct drm_i915_private *dev_priv, - enum intel_display_power_domain domain); -void intel_power_domains_init_hw(struct drm_i915_private *dev_priv); void intel_init_gt_powersave(struct drm_device *dev); void intel_cleanup_gt_powersave(struct drm_device *dev); void intel_enable_gt_powersave(struct drm_device *dev); @@ -1119,13 +1129,6 @@ void ironlake_teardown_rc6(struct drm_device *dev); void gen6_update_ring_freq(struct drm_device *dev); void gen6_rps_idle(struct drm_i915_private *dev_priv); void gen6_rps_boost(struct drm_i915_private *dev_priv); -void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv); -void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv); -void intel_runtime_pm_get(struct drm_i915_private *dev_priv); -void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv); -void intel_runtime_pm_put(struct drm_i915_private *dev_priv); -void intel_init_runtime_pm(struct drm_i915_private *dev_priv); -void intel_fini_runtime_pm(struct drm_i915_private *dev_priv); void ilk_wm_get_hw_state(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 043c5a8eae20..95006e0e982b 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -30,9 +30,6 @@ #include "intel_drv.h" #include "../../../platform/x86/intel_ips.h" #include -#include -#include -#include /** * RC6 is a special power stage which allows the GPU to enter an very @@ -6230,1163 +6227,6 @@ void intel_suspend_hw(struct drm_device *dev) lpt_suspend_hw(dev); } -#define for_each_power_well(i, power_well, domain_mask, power_domains) \ - for (i = 0; \ - i < (power_domains)->power_well_count && \ - ((power_well) = &(power_domains)->power_wells[i]); \ - i++) \ - if ((power_well)->domains & (domain_mask)) - -#define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \ - for (i = (power_domains)->power_well_count - 1; \ - i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\ - i--) \ - if ((power_well)->domains & (domain_mask)) - -/** - * We should only use the power well if we explicitly asked the hardware to - * enable it, so check if it's enabled and also check if we've requested it to - * be enabled. - */ -static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - return I915_READ(HSW_PWR_WELL_DRIVER) == - (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED); -} - -bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv, - enum intel_display_power_domain domain) -{ - struct i915_power_domains *power_domains; - struct i915_power_well *power_well; - bool is_enabled; - int i; - - if (dev_priv->pm.suspended) - return false; - - power_domains = &dev_priv->power_domains; - - is_enabled = true; - - for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { - if (power_well->always_on) - continue; - - if (!power_well->hw_enabled) { - is_enabled = false; - break; - } - } - - return is_enabled; -} - -bool intel_display_power_enabled(struct drm_i915_private *dev_priv, - enum intel_display_power_domain domain) -{ - struct i915_power_domains *power_domains; - bool ret; - - power_domains = &dev_priv->power_domains; - - mutex_lock(&power_domains->lock); - ret = intel_display_power_enabled_unlocked(dev_priv, domain); - mutex_unlock(&power_domains->lock); - - return ret; -} - -/* - * Starting with Haswell, we have a "Power Down Well" that can be turned off - * when not needed anymore. We have 4 registers that can request the power well - * to be enabled, and it will only be disabled if none of the registers is - * requesting it to be enabled. - */ -static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv) -{ - struct drm_device *dev = dev_priv->dev; - - /* - * After we re-enable the power well, if we touch VGA register 0x3d5 - * we'll get unclaimed register interrupts. This stops after we write - * anything to the VGA MSR register. The vgacon module uses this - * register all the time, so if we unbind our driver and, as a - * consequence, bind vgacon, we'll get stuck in an infinite loop at - * console_unlock(). So make here we touch the VGA MSR register, making - * sure vgacon can keep working normally without triggering interrupts - * and error messages. - */ - vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); - outb(inb(VGA_MSR_READ), VGA_MSR_WRITE); - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); - - if (IS_BROADWELL(dev) || (INTEL_INFO(dev)->gen >= 9)) - gen8_irq_power_well_post_enable(dev_priv); -} - -static void hsw_set_power_well(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well, bool enable) -{ - bool is_enabled, enable_requested; - uint32_t tmp; - - tmp = I915_READ(HSW_PWR_WELL_DRIVER); - is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED; - enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST; - - if (enable) { - if (!enable_requested) - I915_WRITE(HSW_PWR_WELL_DRIVER, - HSW_PWR_WELL_ENABLE_REQUEST); - - if (!is_enabled) { - DRM_DEBUG_KMS("Enabling power well\n"); - if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) & - HSW_PWR_WELL_STATE_ENABLED), 20)) - DRM_ERROR("Timeout enabling power well\n"); - } - - hsw_power_well_post_enable(dev_priv); - } else { - if (enable_requested) { - I915_WRITE(HSW_PWR_WELL_DRIVER, 0); - POSTING_READ(HSW_PWR_WELL_DRIVER); - DRM_DEBUG_KMS("Requesting to disable the power well\n"); - } - } -} - -static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - hsw_set_power_well(dev_priv, power_well, power_well->count > 0); - - /* - * We're taking over the BIOS, so clear any requests made by it since - * the driver is in charge now. - */ - if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST) - I915_WRITE(HSW_PWR_WELL_BIOS, 0); -} - -static void hsw_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - hsw_set_power_well(dev_priv, power_well, true); -} - -static void hsw_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - hsw_set_power_well(dev_priv, power_well, false); -} - -static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ -} - -static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - return true; -} - -static void vlv_set_power_well(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well, bool enable) -{ - enum punit_power_well power_well_id = power_well->data; - u32 mask; - u32 state; - u32 ctrl; - - mask = PUNIT_PWRGT_MASK(power_well_id); - state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) : - PUNIT_PWRGT_PWR_GATE(power_well_id); - - mutex_lock(&dev_priv->rps.hw_lock); - -#define COND \ - ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state) - - if (COND) - goto out; - - ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); - ctrl &= ~mask; - ctrl |= state; - vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl); - - if (wait_for(COND, 100)) - DRM_ERROR("timout setting power well state %08x (%08x)\n", - state, - vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); - -#undef COND - -out: - mutex_unlock(&dev_priv->rps.hw_lock); -} - -static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - vlv_set_power_well(dev_priv, power_well, power_well->count > 0); -} - -static void vlv_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - vlv_set_power_well(dev_priv, power_well, true); -} - -static void vlv_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - vlv_set_power_well(dev_priv, power_well, false); -} - -static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - int power_well_id = power_well->data; - bool enabled = false; - u32 mask; - u32 state; - u32 ctrl; - - mask = PUNIT_PWRGT_MASK(power_well_id); - ctrl = PUNIT_PWRGT_PWR_ON(power_well_id); - - mutex_lock(&dev_priv->rps.hw_lock); - - state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask; - /* - * We only ever set the power-on and power-gate states, anything - * else is unexpected. - */ - WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) && - state != PUNIT_PWRGT_PWR_GATE(power_well_id)); - if (state == ctrl) - enabled = true; - - /* - * A transient state at this point would mean some unexpected party - * is poking at the power controls too. - */ - ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask; - WARN_ON(ctrl != state); - - mutex_unlock(&dev_priv->rps.hw_lock); - - return enabled; -} - -static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); - - vlv_set_power_well(dev_priv, power_well, true); - - spin_lock_irq(&dev_priv->irq_lock); - valleyview_enable_display_irqs(dev_priv); - spin_unlock_irq(&dev_priv->irq_lock); - - /* - * During driver initialization/resume we can avoid restoring the - * part of the HW/SW state that will be inited anyway explicitly. - */ - if (dev_priv->power_domains.initializing) - return; - - intel_hpd_init(dev_priv->dev); - - i915_redisable_vga_power_on(dev_priv->dev); -} - -static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); - - spin_lock_irq(&dev_priv->irq_lock); - valleyview_disable_display_irqs(dev_priv); - spin_unlock_irq(&dev_priv->irq_lock); - - vlv_set_power_well(dev_priv, power_well, false); - - vlv_power_sequencer_reset(dev_priv); -} - -static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC); - - /* - * Enable the CRI clock source so we can get at the - * display and the reference clock for VGA - * hotplug / manual detection. - */ - I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | - DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV); - udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ - - vlv_set_power_well(dev_priv, power_well, true); - - /* - * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - - * 6. De-assert cmn_reset/side_reset. Same as VLV X0. - * a. GUnit 0x2110 bit[0] set to 1 (def 0) - * b. The other bits such as sfr settings / modesel may all - * be set to 0. - * - * This should only be done on init and resume from S3 with - * both PLLs disabled, or we risk losing DPIO and PLL - * synchronization. - */ - I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); -} - -static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum pipe pipe; - - WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC); - - for_each_pipe(dev_priv, pipe) - assert_pll_disabled(dev_priv, pipe); - - /* Assert common reset */ - I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST); - - vlv_set_power_well(dev_priv, power_well, false); -} - -static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum dpio_phy phy; - - WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC && - power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D); - - /* - * Enable the CRI clock source so we can get at the - * display and the reference clock for VGA - * hotplug / manual detection. - */ - if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { - phy = DPIO_PHY0; - I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | - DPLL_REFA_CLK_ENABLE_VLV); - I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | - DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV); - } else { - phy = DPIO_PHY1; - I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) | - DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV); - } - udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ - vlv_set_power_well(dev_priv, power_well, true); - - /* Poll for phypwrgood signal */ - if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1)) - DRM_ERROR("Display PHY %d is not power up\n", phy); - - I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) | - PHY_COM_LANE_RESET_DEASSERT(phy)); -} - -static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum dpio_phy phy; - - WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC && - power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D); - - if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { - phy = DPIO_PHY0; - assert_pll_disabled(dev_priv, PIPE_A); - assert_pll_disabled(dev_priv, PIPE_B); - } else { - phy = DPIO_PHY1; - assert_pll_disabled(dev_priv, PIPE_C); - } - - I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) & - ~PHY_COM_LANE_RESET_DEASSERT(phy)); - - vlv_set_power_well(dev_priv, power_well, false); -} - -static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - enum pipe pipe = power_well->data; - bool enabled; - u32 state, ctrl; - - mutex_lock(&dev_priv->rps.hw_lock); - - state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe); - /* - * We only ever set the power-on and power-gate states, anything - * else is unexpected. - */ - WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe)); - enabled = state == DP_SSS_PWR_ON(pipe); - - /* - * A transient state at this point would mean some unexpected party - * is poking at the power controls too. - */ - ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe); - WARN_ON(ctrl << 16 != state); - - mutex_unlock(&dev_priv->rps.hw_lock); - - return enabled; -} - -static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well, - bool enable) -{ - enum pipe pipe = power_well->data; - u32 state; - u32 ctrl; - - state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe); - - mutex_lock(&dev_priv->rps.hw_lock); - -#define COND \ - ((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state) - - if (COND) - goto out; - - ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); - ctrl &= ~DP_SSC_MASK(pipe); - ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); - vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl); - - if (wait_for(COND, 100)) - DRM_ERROR("timout setting power well state %08x (%08x)\n", - state, - vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); - -#undef COND - -out: - mutex_unlock(&dev_priv->rps.hw_lock); -} - -static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0); -} - -static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - WARN_ON_ONCE(power_well->data != PIPE_A && - power_well->data != PIPE_B && - power_well->data != PIPE_C); - - chv_set_pipe_power_well(dev_priv, power_well, true); -} - -static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - WARN_ON_ONCE(power_well->data != PIPE_A && - power_well->data != PIPE_B && - power_well->data != PIPE_C); - - chv_set_pipe_power_well(dev_priv, power_well, false); -} - -static void check_power_well_state(struct drm_i915_private *dev_priv, - struct i915_power_well *power_well) -{ - bool enabled = power_well->ops->is_enabled(dev_priv, power_well); - - if (power_well->always_on || !i915.disable_power_well) { - if (!enabled) - goto mismatch; - - return; - } - - if (enabled != (power_well->count > 0)) - goto mismatch; - - return; - -mismatch: - WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n", - power_well->name, power_well->always_on, enabled, - power_well->count, i915.disable_power_well); -} - -void intel_display_power_get(struct drm_i915_private *dev_priv, - enum intel_display_power_domain domain) -{ - struct i915_power_domains *power_domains; - struct i915_power_well *power_well; - int i; - - intel_runtime_pm_get(dev_priv); - - power_domains = &dev_priv->power_domains; - - mutex_lock(&power_domains->lock); - - for_each_power_well(i, power_well, BIT(domain), power_domains) { - if (!power_well->count++) { - DRM_DEBUG_KMS("enabling %s\n", power_well->name); - power_well->ops->enable(dev_priv, power_well); - power_well->hw_enabled = true; - } - - check_power_well_state(dev_priv, power_well); - } - - power_domains->domain_use_count[domain]++; - - mutex_unlock(&power_domains->lock); -} - -void intel_display_power_put(struct drm_i915_private *dev_priv, - enum intel_display_power_domain domain) -{ - struct i915_power_domains *power_domains; - struct i915_power_well *power_well; - int i; - - power_domains = &dev_priv->power_domains; - - mutex_lock(&power_domains->lock); - - WARN_ON(!power_domains->domain_use_count[domain]); - power_domains->domain_use_count[domain]--; - - for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { - WARN_ON(!power_well->count); - - if (!--power_well->count && i915.disable_power_well) { - DRM_DEBUG_KMS("disabling %s\n", power_well->name); - power_well->hw_enabled = false; - power_well->ops->disable(dev_priv, power_well); - } - - check_power_well_state(dev_priv, power_well); - } - - mutex_unlock(&power_domains->lock); - - intel_runtime_pm_put(dev_priv); -} - -static struct i915_power_domains *hsw_pwr; - -/* Display audio driver power well request */ -int i915_request_power_well(void) -{ - struct drm_i915_private *dev_priv; - - if (!hsw_pwr) - return -ENODEV; - - dev_priv = container_of(hsw_pwr, struct drm_i915_private, - power_domains); - intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO); - return 0; -} -EXPORT_SYMBOL_GPL(i915_request_power_well); - -/* Display audio driver power well release */ -int i915_release_power_well(void) -{ - struct drm_i915_private *dev_priv; - - if (!hsw_pwr) - return -ENODEV; - - dev_priv = container_of(hsw_pwr, struct drm_i915_private, - power_domains); - intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); - return 0; -} -EXPORT_SYMBOL_GPL(i915_release_power_well); - -/* - * Private interface for the audio driver to get CDCLK in kHz. - * - * Caller must request power well using i915_request_power_well() prior to - * making the call. - */ -int i915_get_cdclk_freq(void) -{ - struct drm_i915_private *dev_priv; - - if (!hsw_pwr) - return -ENODEV; - - dev_priv = container_of(hsw_pwr, struct drm_i915_private, - power_domains); - - return intel_ddi_get_cdclk_freq(dev_priv); -} -EXPORT_SYMBOL_GPL(i915_get_cdclk_freq); - - -#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1) - -#define HSW_ALWAYS_ON_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PIPE_A) | \ - BIT(POWER_DOMAIN_TRANSCODER_EDP) | \ - BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \ - BIT(POWER_DOMAIN_PORT_CRT) | \ - BIT(POWER_DOMAIN_PLLS) | \ - BIT(POWER_DOMAIN_INIT)) -#define HSW_DISPLAY_POWER_DOMAINS ( \ - (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) | \ - BIT(POWER_DOMAIN_INIT)) - -#define BDW_ALWAYS_ON_POWER_DOMAINS ( \ - HSW_ALWAYS_ON_POWER_DOMAINS | \ - BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER)) -#define BDW_DISPLAY_POWER_DOMAINS ( \ - (POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) | \ - BIT(POWER_DOMAIN_INIT)) - -#define VLV_ALWAYS_ON_POWER_DOMAINS BIT(POWER_DOMAIN_INIT) -#define VLV_DISPLAY_POWER_DOMAINS POWER_DOMAIN_MASK - -#define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ - BIT(POWER_DOMAIN_PORT_CRT) | \ - BIT(POWER_DOMAIN_INIT)) - -#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ - BIT(POWER_DOMAIN_INIT)) - -#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ - BIT(POWER_DOMAIN_INIT)) - -#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ - BIT(POWER_DOMAIN_INIT)) - -#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ - BIT(POWER_DOMAIN_INIT)) - -#define CHV_PIPE_A_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PIPE_A) | \ - BIT(POWER_DOMAIN_INIT)) - -#define CHV_PIPE_B_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PIPE_B) | \ - BIT(POWER_DOMAIN_INIT)) - -#define CHV_PIPE_C_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PIPE_C) | \ - BIT(POWER_DOMAIN_INIT)) - -#define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ - BIT(POWER_DOMAIN_INIT)) - -#define CHV_DPIO_CMN_D_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \ - BIT(POWER_DOMAIN_INIT)) - -#define CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \ - BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \ - BIT(POWER_DOMAIN_INIT)) - -#define CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS ( \ - BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \ - BIT(POWER_DOMAIN_INIT)) - -static const struct i915_power_well_ops i9xx_always_on_power_well_ops = { - .sync_hw = i9xx_always_on_power_well_noop, - .enable = i9xx_always_on_power_well_noop, - .disable = i9xx_always_on_power_well_noop, - .is_enabled = i9xx_always_on_power_well_enabled, -}; - -static const struct i915_power_well_ops chv_pipe_power_well_ops = { - .sync_hw = chv_pipe_power_well_sync_hw, - .enable = chv_pipe_power_well_enable, - .disable = chv_pipe_power_well_disable, - .is_enabled = chv_pipe_power_well_enabled, -}; - -static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = { - .sync_hw = vlv_power_well_sync_hw, - .enable = chv_dpio_cmn_power_well_enable, - .disable = chv_dpio_cmn_power_well_disable, - .is_enabled = vlv_power_well_enabled, -}; - -static struct i915_power_well i9xx_always_on_power_well[] = { - { - .name = "always-on", - .always_on = 1, - .domains = POWER_DOMAIN_MASK, - .ops = &i9xx_always_on_power_well_ops, - }, -}; - -static const struct i915_power_well_ops hsw_power_well_ops = { - .sync_hw = hsw_power_well_sync_hw, - .enable = hsw_power_well_enable, - .disable = hsw_power_well_disable, - .is_enabled = hsw_power_well_enabled, -}; - -static struct i915_power_well hsw_power_wells[] = { - { - .name = "always-on", - .always_on = 1, - .domains = HSW_ALWAYS_ON_POWER_DOMAINS, - .ops = &i9xx_always_on_power_well_ops, - }, - { - .name = "display", - .domains = HSW_DISPLAY_POWER_DOMAINS, - .ops = &hsw_power_well_ops, - }, -}; - -static struct i915_power_well bdw_power_wells[] = { - { - .name = "always-on", - .always_on = 1, - .domains = BDW_ALWAYS_ON_POWER_DOMAINS, - .ops = &i9xx_always_on_power_well_ops, - }, - { - .name = "display", - .domains = BDW_DISPLAY_POWER_DOMAINS, - .ops = &hsw_power_well_ops, - }, -}; - -static const struct i915_power_well_ops vlv_display_power_well_ops = { - .sync_hw = vlv_power_well_sync_hw, - .enable = vlv_display_power_well_enable, - .disable = vlv_display_power_well_disable, - .is_enabled = vlv_power_well_enabled, -}; - -static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = { - .sync_hw = vlv_power_well_sync_hw, - .enable = vlv_dpio_cmn_power_well_enable, - .disable = vlv_dpio_cmn_power_well_disable, - .is_enabled = vlv_power_well_enabled, -}; - -static const struct i915_power_well_ops vlv_dpio_power_well_ops = { - .sync_hw = vlv_power_well_sync_hw, - .enable = vlv_power_well_enable, - .disable = vlv_power_well_disable, - .is_enabled = vlv_power_well_enabled, -}; - -static struct i915_power_well vlv_power_wells[] = { - { - .name = "always-on", - .always_on = 1, - .domains = VLV_ALWAYS_ON_POWER_DOMAINS, - .ops = &i9xx_always_on_power_well_ops, - }, - { - .name = "display", - .domains = VLV_DISPLAY_POWER_DOMAINS, - .data = PUNIT_POWER_WELL_DISP2D, - .ops = &vlv_display_power_well_ops, - }, - { - .name = "dpio-tx-b-01", - .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01, - }, - { - .name = "dpio-tx-b-23", - .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23, - }, - { - .name = "dpio-tx-c-01", - .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01, - }, - { - .name = "dpio-tx-c-23", - .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23, - }, - { - .name = "dpio-common", - .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS, - .data = PUNIT_POWER_WELL_DPIO_CMN_BC, - .ops = &vlv_dpio_cmn_power_well_ops, - }, -}; - -static struct i915_power_well chv_power_wells[] = { - { - .name = "always-on", - .always_on = 1, - .domains = VLV_ALWAYS_ON_POWER_DOMAINS, - .ops = &i9xx_always_on_power_well_ops, - }, -#if 0 - { - .name = "display", - .domains = VLV_DISPLAY_POWER_DOMAINS, - .data = PUNIT_POWER_WELL_DISP2D, - .ops = &vlv_display_power_well_ops, - }, - { - .name = "pipe-a", - .domains = CHV_PIPE_A_POWER_DOMAINS, - .data = PIPE_A, - .ops = &chv_pipe_power_well_ops, - }, - { - .name = "pipe-b", - .domains = CHV_PIPE_B_POWER_DOMAINS, - .data = PIPE_B, - .ops = &chv_pipe_power_well_ops, - }, - { - .name = "pipe-c", - .domains = CHV_PIPE_C_POWER_DOMAINS, - .data = PIPE_C, - .ops = &chv_pipe_power_well_ops, - }, -#endif - { - .name = "dpio-common-bc", - /* - * XXX: cmnreset for one PHY seems to disturb the other. - * As a workaround keep both powered on at the same - * time for now. - */ - .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS, - .data = PUNIT_POWER_WELL_DPIO_CMN_BC, - .ops = &chv_dpio_cmn_power_well_ops, - }, - { - .name = "dpio-common-d", - /* - * XXX: cmnreset for one PHY seems to disturb the other. - * As a workaround keep both powered on at the same - * time for now. - */ - .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS, - .data = PUNIT_POWER_WELL_DPIO_CMN_D, - .ops = &chv_dpio_cmn_power_well_ops, - }, -#if 0 - { - .name = "dpio-tx-b-01", - .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01, - }, - { - .name = "dpio-tx-b-23", - .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23, - }, - { - .name = "dpio-tx-c-01", - .domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01, - }, - { - .name = "dpio-tx-c-23", - .domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | - VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23, - }, - { - .name = "dpio-tx-d-01", - .domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS | - CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_01, - }, - { - .name = "dpio-tx-d-23", - .domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS | - CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS, - .ops = &vlv_dpio_power_well_ops, - .data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_23, - }, -#endif -}; - -static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv, - enum punit_power_well power_well_id) -{ - struct i915_power_domains *power_domains = &dev_priv->power_domains; - struct i915_power_well *power_well; - int i; - - for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) { - if (power_well->data == power_well_id) - return power_well; - } - - return NULL; -} - -#define set_power_wells(power_domains, __power_wells) ({ \ - (power_domains)->power_wells = (__power_wells); \ - (power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \ -}) - -int intel_power_domains_init(struct drm_i915_private *dev_priv) -{ - struct i915_power_domains *power_domains = &dev_priv->power_domains; - - mutex_init(&power_domains->lock); - - /* - * The enabling order will be from lower to higher indexed wells, - * the disabling order is reversed. - */ - if (IS_HASWELL(dev_priv->dev)) { - set_power_wells(power_domains, hsw_power_wells); - hsw_pwr = power_domains; - } else if (IS_BROADWELL(dev_priv->dev)) { - set_power_wells(power_domains, bdw_power_wells); - hsw_pwr = power_domains; - } else if (IS_CHERRYVIEW(dev_priv->dev)) { - set_power_wells(power_domains, chv_power_wells); - } else if (IS_VALLEYVIEW(dev_priv->dev)) { - set_power_wells(power_domains, vlv_power_wells); - } else { - set_power_wells(power_domains, i9xx_always_on_power_well); - } - - return 0; -} - -void intel_power_domains_remove(struct drm_i915_private *dev_priv) -{ - hsw_pwr = NULL; -} - -static void intel_power_domains_resume(struct drm_i915_private *dev_priv) -{ - struct i915_power_domains *power_domains = &dev_priv->power_domains; - struct i915_power_well *power_well; - int i; - - mutex_lock(&power_domains->lock); - for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) { - power_well->ops->sync_hw(dev_priv, power_well); - power_well->hw_enabled = power_well->ops->is_enabled(dev_priv, - power_well); - } - mutex_unlock(&power_domains->lock); -} - -static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv) -{ - struct i915_power_well *cmn = - lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC); - struct i915_power_well *disp2d = - lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D); - - /* nothing to do if common lane is already off */ - if (!cmn->ops->is_enabled(dev_priv, cmn)) - return; - - /* If the display might be already active skip this */ - if (disp2d->ops->is_enabled(dev_priv, disp2d) && - I915_READ(DPIO_CTL) & DPIO_CMNRST) - return; - - DRM_DEBUG_KMS("toggling display PHY side reset\n"); - - /* cmnlane needs DPLL registers */ - disp2d->ops->enable(dev_priv, disp2d); - - /* - * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx: - * Need to assert and de-assert PHY SB reset by gating the - * common lane power, then un-gating it. - * Simply ungating isn't enough to reset the PHY enough to get - * ports and lanes running. - */ - cmn->ops->disable(dev_priv, cmn); -} - -void intel_power_domains_init_hw(struct drm_i915_private *dev_priv) -{ - struct drm_device *dev = dev_priv->dev; - struct i915_power_domains *power_domains = &dev_priv->power_domains; - - power_domains->initializing = true; - - if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) { - mutex_lock(&power_domains->lock); - vlv_cmnlane_wa(dev_priv); - mutex_unlock(&power_domains->lock); - } - - /* For now, we need the power well to be always enabled. */ - intel_display_set_init_power(dev_priv, true); - intel_power_domains_resume(dev_priv); - power_domains->initializing = false; -} - -void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv) -{ - intel_runtime_pm_get(dev_priv); -} - -void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv) -{ - intel_runtime_pm_put(dev_priv); -} - -void intel_runtime_pm_get(struct drm_i915_private *dev_priv) -{ - struct drm_device *dev = dev_priv->dev; - struct device *device = &dev->pdev->dev; - - if (!HAS_RUNTIME_PM(dev)) - return; - - pm_runtime_get_sync(device); - WARN(dev_priv->pm.suspended, "Device still suspended.\n"); -} - -void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv) -{ - struct drm_device *dev = dev_priv->dev; - struct device *device = &dev->pdev->dev; - - if (!HAS_RUNTIME_PM(dev)) - return; - - WARN(dev_priv->pm.suspended, "Getting nosync-ref while suspended.\n"); - pm_runtime_get_noresume(device); -} - -void intel_runtime_pm_put(struct drm_i915_private *dev_priv) -{ - struct drm_device *dev = dev_priv->dev; - struct device *device = &dev->pdev->dev; - - if (!HAS_RUNTIME_PM(dev)) - return; - - pm_runtime_mark_last_busy(device); - pm_runtime_put_autosuspend(device); -} - -void intel_init_runtime_pm(struct drm_i915_private *dev_priv) -{ - struct drm_device *dev = dev_priv->dev; - struct device *device = &dev->pdev->dev; - - if (!HAS_RUNTIME_PM(dev)) - return; - - pm_runtime_set_active(device); - - /* - * RPM depends on RC6 to save restore the GT HW context, so make RC6 a - * requirement. - */ - if (!intel_enable_rc6(dev)) { - DRM_INFO("RC6 disabled, disabling runtime PM support\n"); - return; - } - - pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */ - pm_runtime_mark_last_busy(device); - pm_runtime_use_autosuspend(device); - - pm_runtime_put_autosuspend(device); -} - -void intel_fini_runtime_pm(struct drm_i915_private *dev_priv) -{ - struct drm_device *dev = dev_priv->dev; - struct device *device = &dev->pdev->dev; - - if (!HAS_RUNTIME_PM(dev)) - return; - - if (!intel_enable_rc6(dev)) - return; - - /* Make sure we're not suspended first. */ - pm_runtime_get_sync(device); - pm_runtime_disable(device); -} - static void intel_init_fbc(struct drm_i915_private *dev_priv) { if (!HAS_FBC(dev_priv)) { diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c new file mode 100644 index 000000000000..2344ecfc27cc --- /dev/null +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -0,0 +1,1190 @@ +/* + * Copyright © 2012-2014 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eugeni Dodonov + * Daniel Vetter + * + */ + +#include +#include + +#include "i915_drv.h" +#include "intel_drv.h" +#include + +static struct i915_power_domains *hsw_pwr; + +#define for_each_power_well(i, power_well, domain_mask, power_domains) \ + for (i = 0; \ + i < (power_domains)->power_well_count && \ + ((power_well) = &(power_domains)->power_wells[i]); \ + i++) \ + if ((power_well)->domains & (domain_mask)) + +#define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \ + for (i = (power_domains)->power_well_count - 1; \ + i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\ + i--) \ + if ((power_well)->domains & (domain_mask)) + +/** + * We should only use the power well if we explicitly asked the hardware to + * enable it, so check if it's enabled and also check if we've requested it to + * be enabled. + */ +static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + return I915_READ(HSW_PWR_WELL_DRIVER) == + (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED); +} + +bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain) +{ + struct i915_power_domains *power_domains; + struct i915_power_well *power_well; + bool is_enabled; + int i; + + if (dev_priv->pm.suspended) + return false; + + power_domains = &dev_priv->power_domains; + + is_enabled = true; + + for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { + if (power_well->always_on) + continue; + + if (!power_well->hw_enabled) { + is_enabled = false; + break; + } + } + + return is_enabled; +} + +bool intel_display_power_enabled(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain) +{ + struct i915_power_domains *power_domains; + bool ret; + + power_domains = &dev_priv->power_domains; + + mutex_lock(&power_domains->lock); + ret = intel_display_power_enabled_unlocked(dev_priv, domain); + mutex_unlock(&power_domains->lock); + + return ret; +} + +/* + * Starting with Haswell, we have a "Power Down Well" that can be turned off + * when not needed anymore. We have 4 registers that can request the power well + * to be enabled, and it will only be disabled if none of the registers is + * requesting it to be enabled. + */ +static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + + /* + * After we re-enable the power well, if we touch VGA register 0x3d5 + * we'll get unclaimed register interrupts. This stops after we write + * anything to the VGA MSR register. The vgacon module uses this + * register all the time, so if we unbind our driver and, as a + * consequence, bind vgacon, we'll get stuck in an infinite loop at + * console_unlock(). So make here we touch the VGA MSR register, making + * sure vgacon can keep working normally without triggering interrupts + * and error messages. + */ + vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); + outb(inb(VGA_MSR_READ), VGA_MSR_WRITE); + vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); + + if (IS_BROADWELL(dev) || (INTEL_INFO(dev)->gen >= 9)) + gen8_irq_power_well_post_enable(dev_priv); +} + +static void hsw_set_power_well(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well, bool enable) +{ + bool is_enabled, enable_requested; + uint32_t tmp; + + tmp = I915_READ(HSW_PWR_WELL_DRIVER); + is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED; + enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST; + + if (enable) { + if (!enable_requested) + I915_WRITE(HSW_PWR_WELL_DRIVER, + HSW_PWR_WELL_ENABLE_REQUEST); + + if (!is_enabled) { + DRM_DEBUG_KMS("Enabling power well\n"); + if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) & + HSW_PWR_WELL_STATE_ENABLED), 20)) + DRM_ERROR("Timeout enabling power well\n"); + } + + hsw_power_well_post_enable(dev_priv); + } else { + if (enable_requested) { + I915_WRITE(HSW_PWR_WELL_DRIVER, 0); + POSTING_READ(HSW_PWR_WELL_DRIVER); + DRM_DEBUG_KMS("Requesting to disable the power well\n"); + } + } +} + +static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + hsw_set_power_well(dev_priv, power_well, power_well->count > 0); + + /* + * We're taking over the BIOS, so clear any requests made by it since + * the driver is in charge now. + */ + if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST) + I915_WRITE(HSW_PWR_WELL_BIOS, 0); +} + +static void hsw_power_well_enable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + hsw_set_power_well(dev_priv, power_well, true); +} + +static void hsw_power_well_disable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + hsw_set_power_well(dev_priv, power_well, false); +} + +static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ +} + +static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + return true; +} + +static void vlv_set_power_well(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well, bool enable) +{ + enum punit_power_well power_well_id = power_well->data; + u32 mask; + u32 state; + u32 ctrl; + + mask = PUNIT_PWRGT_MASK(power_well_id); + state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) : + PUNIT_PWRGT_PWR_GATE(power_well_id); + + mutex_lock(&dev_priv->rps.hw_lock); + +#define COND \ + ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state) + + if (COND) + goto out; + + ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); + ctrl &= ~mask; + ctrl |= state; + vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl); + + if (wait_for(COND, 100)) + DRM_ERROR("timout setting power well state %08x (%08x)\n", + state, + vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); + +#undef COND + +out: + mutex_unlock(&dev_priv->rps.hw_lock); +} + +static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + vlv_set_power_well(dev_priv, power_well, power_well->count > 0); +} + +static void vlv_power_well_enable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + vlv_set_power_well(dev_priv, power_well, true); +} + +static void vlv_power_well_disable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + vlv_set_power_well(dev_priv, power_well, false); +} + +static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + int power_well_id = power_well->data; + bool enabled = false; + u32 mask; + u32 state; + u32 ctrl; + + mask = PUNIT_PWRGT_MASK(power_well_id); + ctrl = PUNIT_PWRGT_PWR_ON(power_well_id); + + mutex_lock(&dev_priv->rps.hw_lock); + + state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask; + /* + * We only ever set the power-on and power-gate states, anything + * else is unexpected. + */ + WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) && + state != PUNIT_PWRGT_PWR_GATE(power_well_id)); + if (state == ctrl) + enabled = true; + + /* + * A transient state at this point would mean some unexpected party + * is poking at the power controls too. + */ + ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask; + WARN_ON(ctrl != state); + + mutex_unlock(&dev_priv->rps.hw_lock); + + return enabled; +} + +static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); + + vlv_set_power_well(dev_priv, power_well, true); + + spin_lock_irq(&dev_priv->irq_lock); + valleyview_enable_display_irqs(dev_priv); + spin_unlock_irq(&dev_priv->irq_lock); + + /* + * During driver initialization/resume we can avoid restoring the + * part of the HW/SW state that will be inited anyway explicitly. + */ + if (dev_priv->power_domains.initializing) + return; + + intel_hpd_init(dev_priv->dev); + + i915_redisable_vga_power_on(dev_priv->dev); +} + +static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); + + spin_lock_irq(&dev_priv->irq_lock); + valleyview_disable_display_irqs(dev_priv); + spin_unlock_irq(&dev_priv->irq_lock); + + vlv_set_power_well(dev_priv, power_well, false); + + vlv_power_sequencer_reset(dev_priv); +} + +static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC); + + /* + * Enable the CRI clock source so we can get at the + * display and the reference clock for VGA + * hotplug / manual detection. + */ + I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | + DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV); + udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ + + vlv_set_power_well(dev_priv, power_well, true); + + /* + * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - + * 6. De-assert cmn_reset/side_reset. Same as VLV X0. + * a. GUnit 0x2110 bit[0] set to 1 (def 0) + * b. The other bits such as sfr settings / modesel may all + * be set to 0. + * + * This should only be done on init and resume from S3 with + * both PLLs disabled, or we risk losing DPIO and PLL + * synchronization. + */ + I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); +} + +static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + enum pipe pipe; + + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC); + + for_each_pipe(dev_priv, pipe) + assert_pll_disabled(dev_priv, pipe); + + /* Assert common reset */ + I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST); + + vlv_set_power_well(dev_priv, power_well, false); +} + +static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + enum dpio_phy phy; + + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC && + power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D); + + /* + * Enable the CRI clock source so we can get at the + * display and the reference clock for VGA + * hotplug / manual detection. + */ + if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { + phy = DPIO_PHY0; + I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | + DPLL_REFA_CLK_ENABLE_VLV); + I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | + DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV); + } else { + phy = DPIO_PHY1; + I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) | + DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV); + } + udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ + vlv_set_power_well(dev_priv, power_well, true); + + /* Poll for phypwrgood signal */ + if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1)) + DRM_ERROR("Display PHY %d is not power up\n", phy); + + I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) | + PHY_COM_LANE_RESET_DEASSERT(phy)); +} + +static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + enum dpio_phy phy; + + WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC && + power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D); + + if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { + phy = DPIO_PHY0; + assert_pll_disabled(dev_priv, PIPE_A); + assert_pll_disabled(dev_priv, PIPE_B); + } else { + phy = DPIO_PHY1; + assert_pll_disabled(dev_priv, PIPE_C); + } + + I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) & + ~PHY_COM_LANE_RESET_DEASSERT(phy)); + + vlv_set_power_well(dev_priv, power_well, false); +} + +static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + enum pipe pipe = power_well->data; + bool enabled; + u32 state, ctrl; + + mutex_lock(&dev_priv->rps.hw_lock); + + state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe); + /* + * We only ever set the power-on and power-gate states, anything + * else is unexpected. + */ + WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe)); + enabled = state == DP_SSS_PWR_ON(pipe); + + /* + * A transient state at this point would mean some unexpected party + * is poking at the power controls too. + */ + ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe); + WARN_ON(ctrl << 16 != state); + + mutex_unlock(&dev_priv->rps.hw_lock); + + return enabled; +} + +static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well, + bool enable) +{ + enum pipe pipe = power_well->data; + u32 state; + u32 ctrl; + + state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe); + + mutex_lock(&dev_priv->rps.hw_lock); + +#define COND \ + ((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state) + + if (COND) + goto out; + + ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); + ctrl &= ~DP_SSC_MASK(pipe); + ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); + vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl); + + if (wait_for(COND, 100)) + DRM_ERROR("timout setting power well state %08x (%08x)\n", + state, + vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); + +#undef COND + +out: + mutex_unlock(&dev_priv->rps.hw_lock); +} + +static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0); +} + +static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + WARN_ON_ONCE(power_well->data != PIPE_A && + power_well->data != PIPE_B && + power_well->data != PIPE_C); + + chv_set_pipe_power_well(dev_priv, power_well, true); +} + +static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + WARN_ON_ONCE(power_well->data != PIPE_A && + power_well->data != PIPE_B && + power_well->data != PIPE_C); + + chv_set_pipe_power_well(dev_priv, power_well, false); +} + +static void check_power_well_state(struct drm_i915_private *dev_priv, + struct i915_power_well *power_well) +{ + bool enabled = power_well->ops->is_enabled(dev_priv, power_well); + + if (power_well->always_on || !i915.disable_power_well) { + if (!enabled) + goto mismatch; + + return; + } + + if (enabled != (power_well->count > 0)) + goto mismatch; + + return; + +mismatch: + WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n", + power_well->name, power_well->always_on, enabled, + power_well->count, i915.disable_power_well); +} + +void intel_display_power_get(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain) +{ + struct i915_power_domains *power_domains; + struct i915_power_well *power_well; + int i; + + intel_runtime_pm_get(dev_priv); + + power_domains = &dev_priv->power_domains; + + mutex_lock(&power_domains->lock); + + for_each_power_well(i, power_well, BIT(domain), power_domains) { + if (!power_well->count++) { + DRM_DEBUG_KMS("enabling %s\n", power_well->name); + power_well->ops->enable(dev_priv, power_well); + power_well->hw_enabled = true; + } + + check_power_well_state(dev_priv, power_well); + } + + power_domains->domain_use_count[domain]++; + + mutex_unlock(&power_domains->lock); +} + +void intel_display_power_put(struct drm_i915_private *dev_priv, + enum intel_display_power_domain domain) +{ + struct i915_power_domains *power_domains; + struct i915_power_well *power_well; + int i; + + power_domains = &dev_priv->power_domains; + + mutex_lock(&power_domains->lock); + + WARN_ON(!power_domains->domain_use_count[domain]); + power_domains->domain_use_count[domain]--; + + for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { + WARN_ON(!power_well->count); + + if (!--power_well->count && i915.disable_power_well) { + DRM_DEBUG_KMS("disabling %s\n", power_well->name); + power_well->hw_enabled = false; + power_well->ops->disable(dev_priv, power_well); + } + + check_power_well_state(dev_priv, power_well); + } + + mutex_unlock(&power_domains->lock); + + intel_runtime_pm_put(dev_priv); +} + +#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1) + +#define HSW_ALWAYS_ON_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PIPE_A) | \ + BIT(POWER_DOMAIN_TRANSCODER_EDP) | \ + BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_CRT) | \ + BIT(POWER_DOMAIN_PLLS) | \ + BIT(POWER_DOMAIN_INIT)) +#define HSW_DISPLAY_POWER_DOMAINS ( \ + (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) | \ + BIT(POWER_DOMAIN_INIT)) + +#define BDW_ALWAYS_ON_POWER_DOMAINS ( \ + HSW_ALWAYS_ON_POWER_DOMAINS | \ + BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER)) +#define BDW_DISPLAY_POWER_DOMAINS ( \ + (POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_ALWAYS_ON_POWER_DOMAINS BIT(POWER_DOMAIN_INIT) +#define VLV_DISPLAY_POWER_DOMAINS POWER_DOMAIN_MASK + +#define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_CRT) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define CHV_PIPE_A_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PIPE_A) | \ + BIT(POWER_DOMAIN_INIT)) + +#define CHV_PIPE_B_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PIPE_B) | \ + BIT(POWER_DOMAIN_INIT)) + +#define CHV_PIPE_C_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PIPE_C) | \ + BIT(POWER_DOMAIN_INIT)) + +#define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define CHV_DPIO_CMN_D_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \ + BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +#define CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS ( \ + BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \ + BIT(POWER_DOMAIN_INIT)) + +static const struct i915_power_well_ops i9xx_always_on_power_well_ops = { + .sync_hw = i9xx_always_on_power_well_noop, + .enable = i9xx_always_on_power_well_noop, + .disable = i9xx_always_on_power_well_noop, + .is_enabled = i9xx_always_on_power_well_enabled, +}; + +static const struct i915_power_well_ops chv_pipe_power_well_ops = { + .sync_hw = chv_pipe_power_well_sync_hw, + .enable = chv_pipe_power_well_enable, + .disable = chv_pipe_power_well_disable, + .is_enabled = chv_pipe_power_well_enabled, +}; + +static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = { + .sync_hw = vlv_power_well_sync_hw, + .enable = chv_dpio_cmn_power_well_enable, + .disable = chv_dpio_cmn_power_well_disable, + .is_enabled = vlv_power_well_enabled, +}; + +static struct i915_power_well i9xx_always_on_power_well[] = { + { + .name = "always-on", + .always_on = 1, + .domains = POWER_DOMAIN_MASK, + .ops = &i9xx_always_on_power_well_ops, + }, +}; + +static const struct i915_power_well_ops hsw_power_well_ops = { + .sync_hw = hsw_power_well_sync_hw, + .enable = hsw_power_well_enable, + .disable = hsw_power_well_disable, + .is_enabled = hsw_power_well_enabled, +}; + +static struct i915_power_well hsw_power_wells[] = { + { + .name = "always-on", + .always_on = 1, + .domains = HSW_ALWAYS_ON_POWER_DOMAINS, + .ops = &i9xx_always_on_power_well_ops, + }, + { + .name = "display", + .domains = HSW_DISPLAY_POWER_DOMAINS, + .ops = &hsw_power_well_ops, + }, +}; + +static struct i915_power_well bdw_power_wells[] = { + { + .name = "always-on", + .always_on = 1, + .domains = BDW_ALWAYS_ON_POWER_DOMAINS, + .ops = &i9xx_always_on_power_well_ops, + }, + { + .name = "display", + .domains = BDW_DISPLAY_POWER_DOMAINS, + .ops = &hsw_power_well_ops, + }, +}; + +static const struct i915_power_well_ops vlv_display_power_well_ops = { + .sync_hw = vlv_power_well_sync_hw, + .enable = vlv_display_power_well_enable, + .disable = vlv_display_power_well_disable, + .is_enabled = vlv_power_well_enabled, +}; + +static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = { + .sync_hw = vlv_power_well_sync_hw, + .enable = vlv_dpio_cmn_power_well_enable, + .disable = vlv_dpio_cmn_power_well_disable, + .is_enabled = vlv_power_well_enabled, +}; + +static const struct i915_power_well_ops vlv_dpio_power_well_ops = { + .sync_hw = vlv_power_well_sync_hw, + .enable = vlv_power_well_enable, + .disable = vlv_power_well_disable, + .is_enabled = vlv_power_well_enabled, +}; + +static struct i915_power_well vlv_power_wells[] = { + { + .name = "always-on", + .always_on = 1, + .domains = VLV_ALWAYS_ON_POWER_DOMAINS, + .ops = &i9xx_always_on_power_well_ops, + }, + { + .name = "display", + .domains = VLV_DISPLAY_POWER_DOMAINS, + .data = PUNIT_POWER_WELL_DISP2D, + .ops = &vlv_display_power_well_ops, + }, + { + .name = "dpio-tx-b-01", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01, + }, + { + .name = "dpio-tx-b-23", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23, + }, + { + .name = "dpio-tx-c-01", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01, + }, + { + .name = "dpio-tx-c-23", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23, + }, + { + .name = "dpio-common", + .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS, + .data = PUNIT_POWER_WELL_DPIO_CMN_BC, + .ops = &vlv_dpio_cmn_power_well_ops, + }, +}; + +static struct i915_power_well chv_power_wells[] = { + { + .name = "always-on", + .always_on = 1, + .domains = VLV_ALWAYS_ON_POWER_DOMAINS, + .ops = &i9xx_always_on_power_well_ops, + }, +#if 0 + { + .name = "display", + .domains = VLV_DISPLAY_POWER_DOMAINS, + .data = PUNIT_POWER_WELL_DISP2D, + .ops = &vlv_display_power_well_ops, + }, + { + .name = "pipe-a", + .domains = CHV_PIPE_A_POWER_DOMAINS, + .data = PIPE_A, + .ops = &chv_pipe_power_well_ops, + }, + { + .name = "pipe-b", + .domains = CHV_PIPE_B_POWER_DOMAINS, + .data = PIPE_B, + .ops = &chv_pipe_power_well_ops, + }, + { + .name = "pipe-c", + .domains = CHV_PIPE_C_POWER_DOMAINS, + .data = PIPE_C, + .ops = &chv_pipe_power_well_ops, + }, +#endif + { + .name = "dpio-common-bc", + /* + * XXX: cmnreset for one PHY seems to disturb the other. + * As a workaround keep both powered on at the same + * time for now. + */ + .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS, + .data = PUNIT_POWER_WELL_DPIO_CMN_BC, + .ops = &chv_dpio_cmn_power_well_ops, + }, + { + .name = "dpio-common-d", + /* + * XXX: cmnreset for one PHY seems to disturb the other. + * As a workaround keep both powered on at the same + * time for now. + */ + .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS, + .data = PUNIT_POWER_WELL_DPIO_CMN_D, + .ops = &chv_dpio_cmn_power_well_ops, + }, +#if 0 + { + .name = "dpio-tx-b-01", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01, + }, + { + .name = "dpio-tx-b-23", + .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23, + }, + { + .name = "dpio-tx-c-01", + .domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01, + }, + { + .name = "dpio-tx-c-23", + .domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | + VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23, + }, + { + .name = "dpio-tx-d-01", + .domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS | + CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_01, + }, + { + .name = "dpio-tx-d-23", + .domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS | + CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS, + .ops = &vlv_dpio_power_well_ops, + .data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_23, + }, +#endif +}; + +static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv, + enum punit_power_well power_well_id) +{ + struct i915_power_domains *power_domains = &dev_priv->power_domains; + struct i915_power_well *power_well; + int i; + + for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) { + if (power_well->data == power_well_id) + return power_well; + } + + return NULL; +} + +#define set_power_wells(power_domains, __power_wells) ({ \ + (power_domains)->power_wells = (__power_wells); \ + (power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \ +}) + +int intel_power_domains_init(struct drm_i915_private *dev_priv) +{ + struct i915_power_domains *power_domains = &dev_priv->power_domains; + + mutex_init(&power_domains->lock); + + /* + * The enabling order will be from lower to higher indexed wells, + * the disabling order is reversed. + */ + if (IS_HASWELL(dev_priv->dev)) { + set_power_wells(power_domains, hsw_power_wells); + hsw_pwr = power_domains; + } else if (IS_BROADWELL(dev_priv->dev)) { + set_power_wells(power_domains, bdw_power_wells); + hsw_pwr = power_domains; + } else if (IS_CHERRYVIEW(dev_priv->dev)) { + set_power_wells(power_domains, chv_power_wells); + } else if (IS_VALLEYVIEW(dev_priv->dev)) { + set_power_wells(power_domains, vlv_power_wells); + } else { + set_power_wells(power_domains, i9xx_always_on_power_well); + } + + return 0; +} + +void intel_power_domains_remove(struct drm_i915_private *dev_priv) +{ + hsw_pwr = NULL; +} + +static void intel_power_domains_resume(struct drm_i915_private *dev_priv) +{ + struct i915_power_domains *power_domains = &dev_priv->power_domains; + struct i915_power_well *power_well; + int i; + + mutex_lock(&power_domains->lock); + for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) { + power_well->ops->sync_hw(dev_priv, power_well); + power_well->hw_enabled = power_well->ops->is_enabled(dev_priv, + power_well); + } + mutex_unlock(&power_domains->lock); +} + +static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv) +{ + struct i915_power_well *cmn = + lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC); + struct i915_power_well *disp2d = + lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D); + + /* nothing to do if common lane is already off */ + if (!cmn->ops->is_enabled(dev_priv, cmn)) + return; + + /* If the display might be already active skip this */ + if (disp2d->ops->is_enabled(dev_priv, disp2d) && + I915_READ(DPIO_CTL) & DPIO_CMNRST) + return; + + DRM_DEBUG_KMS("toggling display PHY side reset\n"); + + /* cmnlane needs DPLL registers */ + disp2d->ops->enable(dev_priv, disp2d); + + /* + * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx: + * Need to assert and de-assert PHY SB reset by gating the + * common lane power, then un-gating it. + * Simply ungating isn't enough to reset the PHY enough to get + * ports and lanes running. + */ + cmn->ops->disable(dev_priv, cmn); +} + +void intel_power_domains_init_hw(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct i915_power_domains *power_domains = &dev_priv->power_domains; + + power_domains->initializing = true; + + if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) { + mutex_lock(&power_domains->lock); + vlv_cmnlane_wa(dev_priv); + mutex_unlock(&power_domains->lock); + } + + /* For now, we need the power well to be always enabled. */ + intel_display_set_init_power(dev_priv, true); + intel_power_domains_resume(dev_priv); + power_domains->initializing = false; +} + +void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv) +{ + intel_runtime_pm_get(dev_priv); +} + +void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv) +{ + intel_runtime_pm_put(dev_priv); +} + +void intel_runtime_pm_get(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + pm_runtime_get_sync(device); + WARN(dev_priv->pm.suspended, "Device still suspended.\n"); +} + +void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + WARN(dev_priv->pm.suspended, "Getting nosync-ref while suspended.\n"); + pm_runtime_get_noresume(device); +} + +void intel_runtime_pm_put(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + pm_runtime_mark_last_busy(device); + pm_runtime_put_autosuspend(device); +} + +void intel_init_runtime_pm(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + pm_runtime_set_active(device); + + /* + * RPM depends on RC6 to save restore the GT HW context, so make RC6 a + * requirement. + */ + if (!intel_enable_rc6(dev)) { + DRM_INFO("RC6 disabled, disabling runtime PM support\n"); + return; + } + + pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */ + pm_runtime_mark_last_busy(device); + pm_runtime_use_autosuspend(device); + + pm_runtime_put_autosuspend(device); +} + +void intel_fini_runtime_pm(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct device *device = &dev->pdev->dev; + + if (!HAS_RUNTIME_PM(dev)) + return; + + if (!intel_enable_rc6(dev)) + return; + + /* Make sure we're not suspended first. */ + pm_runtime_get_sync(device); + pm_runtime_disable(device); +} + +/* Display audio driver power well request */ +int i915_request_power_well(void) +{ + struct drm_i915_private *dev_priv; + + if (!hsw_pwr) + return -ENODEV; + + dev_priv = container_of(hsw_pwr, struct drm_i915_private, + power_domains); + intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO); + return 0; +} +EXPORT_SYMBOL_GPL(i915_request_power_well); + +/* Display audio driver power well release */ +int i915_release_power_well(void) +{ + struct drm_i915_private *dev_priv; + + if (!hsw_pwr) + return -ENODEV; + + dev_priv = container_of(hsw_pwr, struct drm_i915_private, + power_domains); + intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); + return 0; +} +EXPORT_SYMBOL_GPL(i915_release_power_well); + +/* + * Private interface for the audio driver to get CDCLK in kHz. + * + * Caller must request power well using i915_request_power_well() prior to + * making the call. + */ +int i915_get_cdclk_freq(void) +{ + struct drm_i915_private *dev_priv; + + if (!hsw_pwr) + return -ENODEV; + + dev_priv = container_of(hsw_pwr, struct drm_i915_private, + power_domains); + + return intel_ddi_get_cdclk_freq(dev_priv); +} +EXPORT_SYMBOL_GPL(i915_get_cdclk_freq);