From: H Hartley Sweeten Date: Fri, 20 Jun 2014 20:12:57 +0000 (-0700) Subject: staging: comedi: dt282x: tidy up multi-line comments X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9c64ef47a7134d3da686b63f79761e05ac504950;p=linux-beck.git staging: comedi: dt282x: tidy up multi-line comments Tidy up the multi-line comments at the beginning of the file to follow the CodingStyle. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c index 6c799f0a5ffc..15becb536589 100644 --- a/drivers/staging/comedi/drivers/dt282x.c +++ b/drivers/staging/comedi/drivers/dt282x.c @@ -1,57 +1,67 @@ /* - comedi/drivers/dt282x.c - Hardware driver for Data Translation DT2821 series - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 1997-8 David A. Schleef - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. + * dt282x.c + * Comedi driver for Data Translation DT2821 series + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 1997-8 David A. Schleef + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ + /* -Driver: dt282x -Description: Data Translation DT2821 series (including DT-EZ) -Author: ds -Devices: [Data Translation] DT2821 (dt2821), - DT2821-F-16SE (dt2821-f), DT2821-F-8DI (dt2821-f), - DT2821-G-16SE (dt2821-f), DT2821-G-8DI (dt2821-g), - DT2823 (dt2823), - DT2824-PGH (dt2824-pgh), DT2824-PGL (dt2824-pgl), DT2825 (dt2825), - DT2827 (dt2827), DT2828 (dt2828), DT21-EZ (dt21-ez), DT23-EZ (dt23-ez), - DT24-EZ (dt24-ez), DT24-EZ-PGL (dt24-ez-pgl) -Status: complete -Updated: Wed, 22 Aug 2001 17:11:34 -0700 - -Configuration options: - [0] - I/O port base address - [1] - IRQ - [2] - DMA 1 - [3] - DMA 2 - [4] - AI jumpered for 0=single ended, 1=differential - [5] - AI jumpered for 0=straight binary, 1=2's complement - [6] - AO 0 jumpered for 0=straight binary, 1=2's complement - [7] - AO 1 jumpered for 0=straight binary, 1=2's complement - [8] - AI jumpered for 0=[-10,10]V, 1=[0,10], 2=[-5,5], 3=[0,5] - [9] - AO channel 0 range (deprecated, see below) - [10]- AO channel 1 range (deprecated, see below) - -Notes: - - AO commands might be broken. - - If you try to run a command on both the AI and AO subdevices - simultaneously, bad things will happen. The driver needs to - be fixed to check for this situation and return an error. - - AO range is not programmable. The AO subdevice has a range_table - containing all the possible analog output ranges. Use the range - that matches your board configuration to convert between data - values and physical units. -*/ + * Driver: dt282x + * Description: Data Translation DT2821 series (including DT-EZ) + * Author: ds + * Devices: (Data Translation) DT2821 [dt2821] + * (Data Translation) DT2821-F-16SE [dt2821-f] + * (Data Translation) DT2821-F-8DI [dt2821-f] + * (Data Translation) DT2821-G-16SE [dt2821-g] + * (Data Translation) DT2821-G-8DI [dt2821-g] + * (Data Translation) DT2823 [dt2823] + * (Data Translation) DT2824-PGH [dt2824-pgh] + * (Data Translation) DT2824-PGL [dt2824-pgl] + * (Data Translation) DT2825 [dt2825] + * (Data Translation) DT2827 [dt2827] + * (Data Translation) DT2828 [dt2828] + * (Data Translation) DT2928 [dt2829] + * (Data Translation) DT21-EZ [dt21-ez] + * (Data Translation) DT23-EZ [dt23-ez] + * (Data Translation) DT24-EZ [dt24-ez] + * (Data Translation) DT24-EZ-PGL [dt24-ez-pgl] + * Status: complete + * Updated: Wed, 22 Aug 2001 17:11:34 -0700 + * + * Configuration options: + * [0] - I/O port base address + * [1] - IRQ (optional, required for async command support) + * [2] - DMA 1 (optional, required for async command support) + * [3] - DMA 2 (optional, required for async command support) + * [4] - AI jumpered for 0=single ended, 1=differential + * [5] - AI jumpered for 0=straight binary, 1=2's complement + * [6] - AO 0 jumpered for 0=straight binary, 1=2's complement + * [7] - AO 1 jumpered for 0=straight binary, 1=2's complement + * [8] - AI jumpered for 0=[-10,10]V, 1=[0,10], 2=[-5,5], 3=[0,5] + * [9] - AO channel 0 range (deprecated, see below) + * [10]- AO channel 1 range (deprecated, see below) + * + * Notes: + * - AO commands might be broken. + * - If you try to run a command on both the AI and AO subdevices + * simultaneously, bad things will happen. The driver needs to + * be fixed to check for this situation and return an error. + * - AO range is not programmable. The AO subdevice has a range_table + * containing all the possible analog output ranges. Use the range + * that matches your board configuration to convert between data + * values and physical units. + */ #include #include "../comedidev.h"