From: Ralf Baechle Date: Mon, 10 Oct 2005 13:51:21 +0000 (+0100) Subject: [PATCH] ne: Support for RBHMA4500 eval board. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9cc975e00ddb291035bc4d2d49cdc8768ddf1cc3;p=linux-beck.git [PATCH] ne: Support for RBHMA4500 eval board. Support for Toshiba's RBHMA4500 eval board for the TX4938. Signed-off-by: Ralf Baechle drivers/net/ne.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+) Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/ne.c b/drivers/net/ne.c index d209a1556b2e..0de8fdd2aa86 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -54,6 +54,10 @@ static const char version2[] = #include #include +#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) +#include +#endif + #include "8390.h" #define DRV_NAME "ne" @@ -111,6 +115,9 @@ bad_clone_list[] __initdata = { {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */ {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */ {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */ +#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) + {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}}, /* Toshiba built-in */ +#endif {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */ {NULL,} }; @@ -226,6 +233,10 @@ struct net_device * __init ne_probe(int unit) sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); +#ifdef CONFIG_TOSHIBA_RBTX4938 + dev->base_addr = 0x07f20280; + dev->irq = RBTX4938_RTL_8019_IRQ; +#endif err = do_ne_probe(dev); if (err) goto out; @@ -506,6 +517,10 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr) ei_status.name = name; ei_status.tx_start_page = start_page; ei_status.stop_page = stop_page; +#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) + wordlength = 1; +#endif + #ifdef CONFIG_PLAT_OAKS32R ei_status.word16 = 0; #else