From: Dong Aisheng <b29396@freescale.com>
Date: Fri, 6 Sep 2013 11:57:30 +0000 (+0800)
Subject: ENGR00278646-5 ARM: dts: imx6qdl-sabresd: add no-1-8-v property for usdhc
X-Git-Tag: KARO-TX6-2014-07-10~224
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9d8496a30b7b6dc52fbf147dd8ad453e64e0b4a3;p=karo-tx-linux.git

ENGR00278646-5 ARM: dts: imx6qdl-sabresd: add no-1-8-v property for usdhc

The sabresd board does not have external 1.8v/3.3v signal voltage switch
support for usdhc.

Signed-off-by: Dong Aisheng <b29396@freescale.com>
---

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 7d1c79ff2422..8d3dec933530 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -746,6 +746,7 @@
 	bus-width = <8>;
 	cd-gpios = <&gpio2 2 0>;
 	wp-gpios = <&gpio2 3 0>;
+	no-1-8-v;
 	status = "okay";
 };
 
@@ -755,6 +756,7 @@
 	bus-width = <8>;
 	cd-gpios = <&gpio2 0 0>;
 	wp-gpios = <&gpio2 1 0>;
+	no-1-8-v;
 	status = "okay";
 };