From: Emil Tantilov Date: Sat, 5 Mar 2011 01:28:07 +0000 (+0000) Subject: ixgbe: update PHY code to support 100Mbps as well as 1G/10G X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9dda173667207fe59d380e522d318c144dc032f7;p=linux-beck.git ixgbe: update PHY code to support 100Mbps as well as 1G/10G This change updates the PHY setup code to support 100Mbps capable PHYs as well as 10G and 1Gbps. Signed-off-by: Emil Tantilov Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index ff23907bde0c..845c679c8b87 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -158,6 +158,7 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) switch (hw->phy.type) { case ixgbe_phy_tn: + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; phy->ops.check_link = &ixgbe_check_phy_link_tnx; phy->ops.get_firmware_version = &ixgbe_get_phy_firmware_version_tnx; diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 9190a8fca427..f72f705f6183 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -402,49 +402,89 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, **/ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) { - s32 status = IXGBE_NOT_IMPLEMENTED; + s32 status = 0; u32 time_out; u32 max_time_out = 10; - u16 autoneg_reg; + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; + bool autoneg = false; + ixgbe_link_speed speed; - /* - * Set advertisement settings in PHY based on autoneg_advertised - * settings. If autoneg_advertised = 0, then advertise default values - * tnx devices cannot be "forced" to a autoneg 10G and fail. But can - * for a 1G. - */ - hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, &autoneg_reg); + ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + /* Set or unset auto-negotiation 10G advertisement */ + hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, + &autoneg_reg); - if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL) autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G; - else - autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G; - hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, autoneg_reg); + hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + /* Set or unset auto-negotiation 1G advertisement */ + hw->phy.ops.read_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + MDIO_MMD_AN, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_100_FULL) { + /* Set or unset auto-negotiation 100M advertisement */ + hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~ADVERTISE_100FULL; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + autoneg_reg |= ADVERTISE_100FULL; + + hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, + autoneg_reg); + } /* Restart PHY autonegotiation and wait for completion */ - hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, &autoneg_reg); + hw->phy.ops.read_reg(hw, MDIO_CTRL1, + MDIO_MMD_AN, &autoneg_reg); autoneg_reg |= MDIO_AN_CTRL1_RESTART; - hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, autoneg_reg); + hw->phy.ops.write_reg(hw, MDIO_CTRL1, + MDIO_MMD_AN, autoneg_reg); /* Wait for autonegotiation to finish */ for (time_out = 0; time_out < max_time_out; time_out++) { udelay(10); /* Restart PHY autonegotiation and wait for completion */ - status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, - &autoneg_reg); + status = hw->phy.ops.read_reg(hw, MDIO_STAT1, + MDIO_MMD_AN, + &autoneg_reg); autoneg_reg &= MDIO_AN_STAT1_COMPLETE; if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) { - status = 0; break; } } - if (time_out == max_time_out) + if (time_out == max_time_out) { status = IXGBE_ERR_LINK_SETUP; + hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out"); + } return status; } @@ -473,6 +513,9 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, if (speed & IXGBE_LINK_SPEED_1GB_FULL) hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + if (speed & IXGBE_LINK_SPEED_100_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; + /* Setup link based on the new speed settings */ hw->phy.ops.setup_link(hw); @@ -512,6 +555,180 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, return status; } +/** + * ixgbe_check_phy_link_tnx - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads the VS1 register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 phy_link = 0; + u16 phy_speed = 0; + u16 phy_data = 0; + + /* Initialize speed and link to default case */ + *link_up = false; + *speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* + * Check current speed and link status of the PHY register. + * This is a vendor specific register and may have to + * be changed for other copper PHYs. + */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + status = hw->phy.ops.read_reg(hw, + MDIO_STAT1, + MDIO_MMD_VEND1, + &phy_data); + phy_link = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; + phy_speed = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; + if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { + *link_up = true; + if (phy_speed == + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } + } + + return status; +} + +/** + * ixgbe_setup_phy_link_tnx - Set and restart autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; + bool autoneg = false; + ixgbe_link_speed speed; + + ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + /* Set or unset auto-negotiation 10G advertisement */ + hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G; + + hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + /* Set or unset auto-negotiation 1G advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; + + hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, + MDIO_MMD_AN, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_100_FULL) { + /* Set or unset auto-negotiation 100M advertisement */ + hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~ADVERTISE_100FULL; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + autoneg_reg |= ADVERTISE_100FULL; + + hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, + autoneg_reg); + } + + /* Restart PHY autonegotiation and wait for completion */ + hw->phy.ops.read_reg(hw, MDIO_CTRL1, + MDIO_MMD_AN, &autoneg_reg); + + autoneg_reg |= MDIO_AN_CTRL1_RESTART; + + hw->phy.ops.write_reg(hw, MDIO_CTRL1, + MDIO_MMD_AN, autoneg_reg); + + /* Wait for autonegotiation to finish */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + /* Restart PHY autonegotiation and wait for completion */ + status = hw->phy.ops.read_reg(hw, MDIO_STAT1, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= MDIO_AN_STAT1_COMPLETE; + if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) + break; + } + + if (time_out == max_time_out) { + status = IXGBE_ERR_LINK_SETUP; + hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out"); + } + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, TNX_FW_REV, + MDIO_MMD_VEND1, + firmware_version); + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, AQ_FW_REV, + MDIO_MMD_VEND1, + firmware_version); + + return status; +} + /** * ixgbe_reset_phy_nl - Performs a PHY reset * @hw: pointer to hardware structure @@ -1476,86 +1693,6 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) ixgbe_i2c_stop(hw); } -/** - * ixgbe_check_phy_link_tnx - Determine link and speed status - * @hw: pointer to hardware structure - * - * Reads the VS1 register to determine if link is up and the current speed for - * the PHY. - **/ -s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up) -{ - s32 status = 0; - u32 time_out; - u32 max_time_out = 10; - u16 phy_link = 0; - u16 phy_speed = 0; - u16 phy_data = 0; - - /* Initialize speed and link to default case */ - *link_up = false; - *speed = IXGBE_LINK_SPEED_10GB_FULL; - - /* - * Check current speed and link status of the PHY register. - * This is a vendor specific register and may have to - * be changed for other copper PHYs. - */ - for (time_out = 0; time_out < max_time_out; time_out++) { - udelay(10); - status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, - MDIO_MMD_VEND1, - &phy_data); - phy_link = phy_data & - IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; - phy_speed = phy_data & - IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; - if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { - *link_up = true; - if (phy_speed == - IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) - *speed = IXGBE_LINK_SPEED_1GB_FULL; - break; - } - } - - return status; -} - -/** - * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version - * @hw: pointer to hardware structure - * @firmware_version: pointer to the PHY Firmware Version - **/ -s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, - u16 *firmware_version) -{ - s32 status = 0; - - status = hw->phy.ops.read_reg(hw, TNX_FW_REV, MDIO_MMD_VEND1, - firmware_version); - - return status; -} - -/** - * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version - * @hw: pointer to hardware structure - * @firmware_version: pointer to the PHY Firmware Version -**/ -s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, - u16 *firmware_version) -{ - s32 status = 0; - - status = hw->phy.ops.read_reg(hw, AQ_FW_REV, MDIO_MMD_VEND1, - firmware_version); - - return status; -} - /** * ixgbe_tn_check_overtemp - Checks if an overtemp occured. * @hw: pointer to hardware structure diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h index 9bf2783d7a74..197bdd13106a 100644 --- a/drivers/net/ixgbe/ixgbe_phy.h +++ b/drivers/net/ixgbe/ixgbe_phy.h @@ -108,6 +108,7 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up); +s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw); s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, u16 *firmware_version); s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index f190a4a8faf4..63d862d3fd90 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1009,6 +1009,13 @@ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */ +/* MII clause 22/28 definitions */ +#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */ +#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */ +#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/ +#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/ +#define IXGBE_MII_AUTONEG_REG 0x0 + #define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0 #define IXGBE_MAX_PHY_ADDR 32