From: Sakari Ailus Date: Wed, 25 Mar 2015 22:57:36 +0000 (-0300) Subject: [media] dt: bindings: Add lane-polarity property to endpoint nodes X-Git-Tag: v4.1-rc1~59^2~1^2~254 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9e1ee1b7307e384716a8c2cefca9036a2cf170e5;p=karo-tx-linux.git [media] dt: bindings: Add lane-polarity property to endpoint nodes Add lane-polarity property to endpoint nodes. This essentially tells that the order of the differential signal wires is inverted. Signed-off-by: Sakari Ailus Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 571b4c60665f..9cd2a369125d 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -106,6 +106,12 @@ Optional endpoint properties - link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the actual frequency of the bus, not bits per clock per lane value. An array of 64-bit unsigned integers. +- lane-polarities: an array of polarities of the lanes starting from the clock + lane and followed by the data lanes in the same order as in data-lanes. + Valid values are 0 (normal) and 1 (inverted). The length of the array + should be the combined length of data-lanes and clock-lanes properties. + If the lane-polarities property is omitted, the value must be interpreted + as 0 (normal). This property is valid for serial busses only. Example