From: Ingo Molnar Date: Sat, 31 Jan 2009 01:48:17 +0000 (+0100) Subject: x86, irq: add IRQ layout comments X-Git-Tag: v2.6.30-rc1~211^2~26^2~2^2~35 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9fc2e79d4f239c1c1dfdab7b10854c7588b39d9a;p=karo-tx-linux.git x86, irq: add IRQ layout comments Describe the layout of x86 trap/exception/IRQ vectors and clean up indentation and other small details. Signed-off-by: Ingo Molnar --- diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 81fc883b3c05..5f7d6a1e3d28 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -3,45 +3,69 @@ #include -#define NMI_VECTOR 0x02 +/* + * Linux IRQ vector layout. + * + * There are 256 IDT entries (per CPU - each entry is 8 bytes) which can + * be defined by Linux. They are used as a jump table by the CPU when a + * given vector is triggered - by a CPU-external, CPU-internal or + * software-triggered event. + * + * Linux sets the kernel code address each entry jumps to early during + * bootup, and never changes them. This is the general layout of the + * IDT entries: + * + * Vectors 0 ... 31 : system traps and exceptions - hardcoded events + * Vectors 32 ... 127 : device interrupts + * Vector 128 : legacy int80 syscall interface + * Vectors 129 ... 237 : device interrupts + * Vectors 238 ... 255 : special interrupts + * + * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table. + * + * This file enumerates the exact layout of them: + */ + +#define NMI_VECTOR 0x02 /* * IDT vectors usable for external interrupt sources start * at 0x20: */ -#define FIRST_EXTERNAL_VECTOR 0x20 +#define FIRST_EXTERNAL_VECTOR 0x20 #ifdef CONFIG_X86_32 -# define SYSCALL_VECTOR 0x80 +# define SYSCALL_VECTOR 0x80 #else -# define IA32_SYSCALL_VECTOR 0x80 +# define IA32_SYSCALL_VECTOR 0x80 #endif /* * Reserve the lowest usable priority level 0x20 - 0x2f for triggering * cleanup after irq migration. */ -#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR +#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR /* * Vectors 0x30-0x3f are used for ISA interrupts. */ -#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) -#define IRQ1_VECTOR (IRQ0_VECTOR + 1) -#define IRQ2_VECTOR (IRQ0_VECTOR + 2) -#define IRQ3_VECTOR (IRQ0_VECTOR + 3) -#define IRQ4_VECTOR (IRQ0_VECTOR + 4) -#define IRQ5_VECTOR (IRQ0_VECTOR + 5) -#define IRQ6_VECTOR (IRQ0_VECTOR + 6) -#define IRQ7_VECTOR (IRQ0_VECTOR + 7) -#define IRQ8_VECTOR (IRQ0_VECTOR + 8) -#define IRQ9_VECTOR (IRQ0_VECTOR + 9) -#define IRQ10_VECTOR (IRQ0_VECTOR + 10) -#define IRQ11_VECTOR (IRQ0_VECTOR + 11) -#define IRQ12_VECTOR (IRQ0_VECTOR + 12) -#define IRQ13_VECTOR (IRQ0_VECTOR + 13) -#define IRQ14_VECTOR (IRQ0_VECTOR + 14) -#define IRQ15_VECTOR (IRQ0_VECTOR + 15) +#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) + +#define IRQ1_VECTOR (IRQ0_VECTOR + 1) +#define IRQ2_VECTOR (IRQ0_VECTOR + 2) +#define IRQ3_VECTOR (IRQ0_VECTOR + 3) +#define IRQ4_VECTOR (IRQ0_VECTOR + 4) +#define IRQ5_VECTOR (IRQ0_VECTOR + 5) +#define IRQ6_VECTOR (IRQ0_VECTOR + 6) +#define IRQ7_VECTOR (IRQ0_VECTOR + 7) +#define IRQ8_VECTOR (IRQ0_VECTOR + 8) +#define IRQ9_VECTOR (IRQ0_VECTOR + 9) +#define IRQ10_VECTOR (IRQ0_VECTOR + 10) +#define IRQ11_VECTOR (IRQ0_VECTOR + 11) +#define IRQ12_VECTOR (IRQ0_VECTOR + 12) +#define IRQ13_VECTOR (IRQ0_VECTOR + 13) +#define IRQ14_VECTOR (IRQ0_VECTOR + 14) +#define IRQ15_VECTOR (IRQ0_VECTOR + 15) /* * Special IRQ vectors used by the SMP architecture, 0xf0-0xff @@ -75,36 +99,36 @@ /* f0-f7 used for spreading out TLB flushes: */ #define INVALIDATE_TLB_VECTOR_END 0xf7 #define INVALIDATE_TLB_VECTOR_START 0xf0 -#define NUM_INVALIDATE_TLB_VECTORS 8 +#define NUM_INVALIDATE_TLB_VECTORS 8 /* * Local APIC timer IRQ vector is on a different priority level, * to work around the 'lost local interrupt if more than 2 IRQ * sources per level' errata. */ -#define LOCAL_TIMER_VECTOR 0xef +#define LOCAL_TIMER_VECTOR 0xef /* * Performance monitoring interrupt vector: */ -#define LOCAL_PERF_VECTOR 0xee +#define LOCAL_PERF_VECTOR 0xee /* * First APIC vector available to drivers: (vectors 0x30-0xee) we * start at 0x31(0x41) to spread out vectors evenly between priority * levels. (0x80 is the syscall vector) */ -#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) +#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) -#define NR_VECTORS 256 +#define NR_VECTORS 256 -#define FPU_IRQ 13 +#define FPU_IRQ 13 -#define FIRST_VM86_IRQ 3 -#define LAST_VM86_IRQ 15 -#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) +#define FIRST_VM86_IRQ 3 +#define LAST_VM86_IRQ 15 +#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) -#define NR_IRQS_LEGACY 16 +#define NR_IRQS_LEGACY 16 #ifdef CONFIG_X86_IO_APIC @@ -112,9 +136,9 @@ #ifndef CONFIG_SPARSE_IRQ # if NR_CPUS < MAX_IO_APICS -# define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) +# define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) # else -# define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) +# define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) # endif #else # define NR_IRQS \ @@ -124,7 +148,7 @@ #endif #else /* !CONFIG_X86_IO_APIC: */ -# define NR_IRQS 16 +# define NR_IRQS 16 #endif #endif /* _ASM_X86_IRQ_VECTORS_H */