From: Mark Brown Date: Tue, 19 Jan 2010 15:26:56 +0000 (+0000) Subject: ARM: SMDK6410: Set up interrupt range for WM835x on 1190-EV1 PMIC board X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9fca878623378e7dd6da8e7135a561c17bc1112b;p=linux-beck.git ARM: SMDK6410: Set up interrupt range for WM835x on 1190-EV1 PMIC board The WM835x driver won't actually use this yet but it will in the future when the changes converting it to genirq are merged. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 5376880cdd89..eba345fadffe 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -399,6 +399,7 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350) static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = { .init = smdk6410_wm8350_init, .irq_high = 1, + .irq_base = IRQ_BOARD_START, }; #endif diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index 176fe15a61d6..a22758194e6d 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -198,7 +198,11 @@ * interrupt controllers). */ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) +#ifdef CONFIG_SMDK6410_WM1190_EV1 +#define IRQ_BOARD_NR 64 +#else #define IRQ_BOARD_NR 16 +#endif #define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)