From: Alexander Aring <alex.aring@gmail.com>
Date: Sat, 13 Jun 2015 20:15:53 +0000 (+0200)
Subject: at86rf230: use level high as fallback default
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=9ff19e6f44e370d9ac20c2cc677724e44d76f2c6;p=linux-beck.git

at86rf230: use level high as fallback default

This patch use high level interrupt type as fallback handling when no
irq type is given.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 1bf86d2df23f..25e1edecc24b 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1633,7 +1633,7 @@ static int at86rf230_probe(struct spi_device *spi)
 
 	irq_type = irq_get_trigger_type(spi->irq);
 	if (!irq_type)
-		irq_type = IRQF_TRIGGER_RISING;
+		irq_type = IRQF_TRIGGER_HIGH;
 
 	rc = devm_request_irq(&spi->dev, spi->irq, at86rf230_isr,
 			      IRQF_SHARED | irq_type, dev_name(&spi->dev), lp);