From: David Wu Date: Mon, 16 May 2016 14:06:29 +0000 (+0800) Subject: i2c: rk3x: support fast-mode plus for rk3399 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a02f3d081a79ec702b85b9c1a91edf770cf1eab2;p=linux-beck.git i2c: rk3x: support fast-mode plus for rk3399 Implement fast mode plus that allows bus speeds of up to 1MHz. Signed-off-by: David Wu Reviewed-by: Douglas Anderson Tested-by: Caesar Wang Reviewed-by: Heiko Stuebner Tested-by: Heiko Stuebner Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index e9ce6a33e8c4..2bc8b01153d6 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -126,6 +126,17 @@ static const struct i2c_spec_values fast_mode_spec = { .min_hold_buffer_ns = 1300, }; +static const struct i2c_spec_values fast_mode_plus_spec = { + .min_hold_start_ns = 260, + .min_low_ns = 500, + .min_high_ns = 260, + .min_setup_start_ns = 260, + .max_data_hold_ns = 400, + .min_data_setup_ns = 50, + .min_setup_stop_ns = 260, + .min_hold_buffer_ns = 500, +}; + /** * struct rk3x_i2c_calced_timings: * @div_low: Divider output for low @@ -532,8 +543,10 @@ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) { if (speed <= 100000) return &standard_mode_spec; - else + else if (speed <= 400000) return &fast_mode_spec; + else + return &fast_mode_plus_spec; } /** @@ -744,9 +757,9 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate, const struct i2c_spec_values *spec; int ret = 0; - /* Support standard-mode and fast-mode */ - if (WARN_ON(t->bus_freq_hz > 400000)) - t->bus_freq_hz = 400000; + /* Support standard-mode, fast-mode and fast-mode plus */ + if (WARN_ON(t->bus_freq_hz > 1000000)) + t->bus_freq_hz = 1000000; /* prevent scl_rate_khz from becoming 0 */ if (WARN_ON(t->bus_freq_hz < 1000))