From: Luca Ellero Date: Thu, 7 Aug 2014 07:10:25 +0000 (+0200) Subject: staging: comedi: add NI USB-6501 support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a03bb00e50ab4c07107da58a52a0bff7943f360c;p=linux-beck.git staging: comedi: add NI USB-6501 support Enable support for the National Instruments USB-6501 module. The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that provides 24 digital I/O lines channels and one 32-bit counter. This is a preliminary version: GPIO: works counter: doesn't work Signed-off-by: Luca Ellero Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 36f2c7159250..7d6cebc112dc 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -1209,6 +1209,17 @@ config COMEDI_DT9812 To compile this driver as a module, choose M here: the module will be called dt9812. +config COMEDI_NI_USB6501 + tristate "NI USB-6501 support" + ---help--- + Enable support for the National Instruments USB-6501 module. + + The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that + provides 24 digital I/O lines channels and one 32-bit counter. + + To compile this driver as a module, choose M here: the module will be + called ni_usb6501. + config COMEDI_USBDUX tristate "ITL USB-DUX-D support" ---help--- diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile index 8873d4807a01..87ac79136084 100644 --- a/drivers/staging/comedi/drivers/Makefile +++ b/drivers/staging/comedi/drivers/Makefile @@ -125,6 +125,7 @@ obj-$(CONFIG_COMEDI_QUATECH_DAQP_CS) += quatech_daqp_cs.o # Comedi USB drivers obj-$(CONFIG_COMEDI_DT9812) += dt9812.o +obj-$(CONFIG_COMEDI_NI_USB6501) += ni_usb6501.o obj-$(CONFIG_COMEDI_USBDUX) += usbdux.o obj-$(CONFIG_COMEDI_USBDUXFAST) += usbduxfast.o obj-$(CONFIG_COMEDI_USBDUXSIGMA) += usbduxsigma.o diff --git a/drivers/staging/comedi/drivers/ni_usb6501.c b/drivers/staging/comedi/drivers/ni_usb6501.c new file mode 100644 index 000000000000..6a4f965ab79e --- /dev/null +++ b/drivers/staging/comedi/drivers/ni_usb6501.c @@ -0,0 +1,425 @@ +/* + * comedi/drivers/ni_usb6501.c + * Comedi driver for National Instruments USB-6501 + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 2014 Luca Ellero + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Driver: ni_usb6501 + * Description: National Instruments USB-6501 module + * Devices: [National Instruments] USB-6501 (ni_usb6501) + * Author: Luca Ellero + * Updated: 5 Aug 2014 + * Status: works + * + * This driver works, but counter device is not implemented yet. + * + * Configuration Options: + * none + */ + +/* + * NI-6501 - USB PROTOCOL DESCRIPTION + * + * Every command is composed by two USB packets: + * - request (out) + * - response (in) + * + * Every packet is at least 12 bytes long, here is the meaning of + * every field (all values are hex): + * + * byte 0 is always 00 + * byte 1 is always 01 + * byte 2 is always 00 + * byte 3 is the total packet length + * + * byte 4 is always 00 + * byte 5 is is the total packet length - 4 + * byte 6 is always 01 + * byte 7 is the command + * + * byte 8 is 02 (request) or 00 (response) + * byte 9 is 00 (response) or 10 (port request) or 20 (counter request) + * byte 10 is always 00 + * byte 11 is 00 (request) or 02 (response) + * + * + * CMD: 0xE READ_PORT + * REQ: 00 01 00 10 00 0C 01 0E 02 10 00 00 00 03 00 + * RES: 00 01 00 10 00 0C 01 00 00 00 00 02 00 03 00 + + * CMD: 0xF WRITE_PORT + * REQ: 00 01 00 14 00 10 01 0F 02 10 00 00 00 03 00 03 00 00 + * RES: 00 01 00 0C 00 08 01 00 00 00 00 02 + * + * CMD: 0x12 SET_PORT_DIR (0 = input, 1 = output) + * REQ: 00 01 00 18 00 14 01 12 02 10 00 00 + * 00 05 00 05 00 00 00 00 00 + * RES: 00 01 00 0C 00 08 01 00 00 00 00 02 + */ + +#include +#include +#include +#include + +#include "../comedidev.h" + +#define NI6501_TIMEOUT 1000 + +/* Port request packets */ +static const u8 READ_PORT_REQUEST[] = {0x00, 0x01, 0x00, 0x10, + 0x00, 0x0C, 0x01, 0x0E, + 0x02, 0x10, 0x00, 0x00, + 0x00, 0x03, 0x00, 0x00}; + +static const u8 WRITE_PORT_REQUEST[] = {0x00, 0x01, 0x00, 0x14, + 0x00, 0x10, 0x01, 0x0F, + 0x02, 0x10, 0x00, 0x00, + 0x00, 0x03, 0x00, 0x00, + 0x03, 0x00, 0x00, 0x00}; + +static const u8 SET_PORT_DIR_REQUEST[] = {0x00, 0x01, 0x00, 0x18, + 0x00, 0x14, 0x01, 0x12, + 0x02, 0x10, 0x00, 0x00, + 0x00, 0x05, 0x00, 0x00, + 0x00, 0x00, 0x05, 0x00, + 0x00, 0x00, 0x00, 0x00}; + +/* Response packets */ +static const u8 GENERIC_RESPONSE[] = {0x00, 0x01, 0x00, 0x0C, + 0x00, 0x08, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x02}; + +static const u8 READ_PORT_RESPONSE[] = {0x00, 0x01, 0x00, 0x10, + 0x00, 0x0C, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x02, + 0x00, 0x03, 0x00, 0x00}; + +enum commands { + READ_PORT, + WRITE_PORT, + SET_PORT_DIR +}; + +struct ni6501_private { + struct usb_endpoint_descriptor *ep_rx; + struct usb_endpoint_descriptor *ep_tx; + struct semaphore sem; + u8 *usb_rx_buf; + u8 *usb_tx_buf; +}; + +static int ni6501_send_command(struct comedi_device *dev, int command, + const u8 *port, u8 *bitmap) +{ + struct usb_device *usb = comedi_to_usb_dev(dev); + struct ni6501_private *devpriv = dev->private; + int request_size, response_size; + u8 *tx = devpriv->usb_tx_buf; + int ret; + + if (!tx || !port) + return -EINVAL; + + if (command != SET_PORT_DIR && !bitmap) + return -EINVAL; + + down(&devpriv->sem); + + switch (command) { + case READ_PORT: + + request_size = sizeof(READ_PORT_REQUEST); + /* 4 additional bytes for READ_PORT request */ + response_size = sizeof(GENERIC_RESPONSE) + 4; + + memcpy(tx, READ_PORT_REQUEST, request_size); + + tx[14] = port[0]; + + break; + + case WRITE_PORT: + + request_size = sizeof(WRITE_PORT_REQUEST); + response_size = sizeof(GENERIC_RESPONSE); + + memcpy(tx, WRITE_PORT_REQUEST, request_size); + + tx[14] = port[0]; + tx[17] = bitmap[0]; + + break; + + case SET_PORT_DIR: + + request_size = sizeof(SET_PORT_DIR_REQUEST); + response_size = sizeof(GENERIC_RESPONSE); + + memcpy(tx, SET_PORT_DIR_REQUEST, request_size); + + tx[14] = port[0]; + tx[15] = port[1]; + tx[16] = port[2]; + + break; + + default: + ret = -EINVAL; + goto end; + } + + ret = usb_bulk_msg(usb, + usb_sndbulkpipe(usb, + devpriv->ep_tx->bEndpointAddress), + devpriv->usb_tx_buf, + request_size, + NULL, + NI6501_TIMEOUT); + if (ret) + goto end; + + ret = usb_bulk_msg(usb, + usb_rcvbulkpipe(usb, + devpriv->ep_rx->bEndpointAddress), + devpriv->usb_rx_buf, + response_size, + NULL, + NI6501_TIMEOUT); + if (ret) + goto end; + + /* Check if results are valid */ + + if (command == READ_PORT) { + bitmap[0] = devpriv->usb_rx_buf[14]; + /* mask bitmap for comparing */ + devpriv->usb_rx_buf[14] = 0x00; + + if (memcmp(devpriv->usb_rx_buf, READ_PORT_RESPONSE, + sizeof(READ_PORT_RESPONSE))) { + ret = -EINVAL; + } + } else if (memcmp(devpriv->usb_rx_buf, GENERIC_RESPONSE, + sizeof(GENERIC_RESPONSE))) { + ret = -EINVAL; + } +end: + up(&devpriv->sem); + + return ret; +} + +static int ni6501_dio_insn_config(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + int ret; + u8 port[3]; + + ret = comedi_dio_insn_config(dev, s, insn, data, 0); + if (ret) + return ret; + + port[0] = (s->io_bits) & 0xff; + port[1] = (s->io_bits >> 8) & 0xff; + port[2] = (s->io_bits >> 16) & 0xff; + + ret = ni6501_send_command(dev, SET_PORT_DIR, port, NULL); + if (ret) + return ret; + + return insn->n; +} + +static int ni6501_dio_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + unsigned int mask; + int ret; + u8 port; + u8 bitmap; + + mask = comedi_dio_update_state(s, data); + + for (port = 0; port < 3; port++) { + if (mask & (0xFF << port * 8)) { + bitmap = (s->state >> port * 8) & 0xFF; + ret = ni6501_send_command(dev, WRITE_PORT, + &port, &bitmap); + if (ret) + return ret; + } + } + + data[1] = 0; + + for (port = 0; port < 3; port++) { + ret = ni6501_send_command(dev, READ_PORT, &port, &bitmap); + if (ret) + return ret; + data[1] |= bitmap << port * 8; + } + + return insn->n; +} + +static int ni6501_alloc_usb_buffers(struct comedi_device *dev) +{ + struct ni6501_private *devpriv = dev->private; + size_t size; + + size = le16_to_cpu(devpriv->ep_rx->wMaxPacketSize); + devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL); + if (!devpriv->usb_rx_buf) + return -ENOMEM; + + size = le16_to_cpu(devpriv->ep_tx->wMaxPacketSize); + devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL); + if (!devpriv->usb_tx_buf) { + kfree(devpriv->usb_rx_buf); + return -ENOMEM; + } + + return 0; +} + +static int ni6501_find_endpoints(struct comedi_device *dev) +{ + struct usb_interface *intf = comedi_to_usb_interface(dev); + struct ni6501_private *devpriv = dev->private; + struct usb_host_interface *iface_desc = intf->cur_altsetting; + struct usb_endpoint_descriptor *ep_desc; + int i; + + if (iface_desc->desc.bNumEndpoints != 2) { + dev_err(dev->class_dev, "Wrong number of endpoints\n"); + return -ENODEV; + } + + for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { + ep_desc = &iface_desc->endpoint[i].desc; + + if (usb_endpoint_is_bulk_in(ep_desc)) { + if (!devpriv->ep_rx) + devpriv->ep_rx = ep_desc; + continue; + } + + if (usb_endpoint_is_bulk_out(ep_desc)) { + if (!devpriv->ep_tx) + devpriv->ep_tx = ep_desc; + continue; + } + } + + if (!devpriv->ep_rx || !devpriv->ep_tx) + return -ENODEV; + + return 0; +} + +static int ni6501_auto_attach(struct comedi_device *dev, + unsigned long context) +{ + struct usb_interface *intf = comedi_to_usb_interface(dev); + struct ni6501_private *devpriv; + struct comedi_subdevice *s; + int ret; + + devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); + if (!devpriv) + return -ENOMEM; + + ret = ni6501_find_endpoints(dev); + if (ret) + return ret; + + ret = ni6501_alloc_usb_buffers(dev); + if (ret) + return ret; + + sema_init(&devpriv->sem, 1); + usb_set_intfdata(intf, devpriv); + + ret = comedi_alloc_subdevices(dev, 1); + if (ret) + return ret; + + /* Digital Input/Output subdevice */ + s = &dev->subdevices[0]; + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 24; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = ni6501_dio_insn_bits; + s->insn_config = ni6501_dio_insn_config; + + return 0; +} + +static void ni6501_detach(struct comedi_device *dev) +{ + struct usb_interface *intf = comedi_to_usb_interface(dev); + struct ni6501_private *devpriv = dev->private; + + if (!devpriv) + return; + + down(&devpriv->sem); + + usb_set_intfdata(intf, NULL); + + kfree(devpriv->usb_rx_buf); + kfree(devpriv->usb_tx_buf); + + up(&devpriv->sem); +} + +static struct comedi_driver ni6501_driver = { + .module = THIS_MODULE, + .driver_name = "ni6501", + .auto_attach = ni6501_auto_attach, + .detach = ni6501_detach, +}; + +static int ni6501_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return comedi_usb_auto_config(intf, &ni6501_driver, id->driver_info); +} + +static const struct usb_device_id ni6501_usb_table[] = { + { USB_DEVICE(0x3923, 0x718a) }, + { } +}; +MODULE_DEVICE_TABLE(usb, ni6501_usb_table); + +static struct usb_driver ni6501_usb_driver = { + .name = "ni6501", + .id_table = ni6501_usb_table, + .probe = ni6501_usb_probe, + .disconnect = comedi_usb_auto_unconfig, +}; +module_comedi_usb_driver(ni6501_driver, ni6501_usb_driver); + +MODULE_AUTHOR("Luca Ellero"); +MODULE_DESCRIPTION("Comedi driver for National Instruments USB-6501"); +MODULE_LICENSE("GPL");