From: Bartosz Markowski Date: Fri, 3 Jul 2015 13:33:49 +0000 (+0200) Subject: ath10k: fix QCA61X4 boot up X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a052158aa981ca470673f49c636b289ee16894ea;p=linux-beck.git ath10k: fix QCA61X4 boot up commit a521ee983d312db7 ("ath10k: Add new reg_address/mask to hw register table") broke QCA61x4 support by providing wrong fw_indicator_address, which should have been 0x0003a028 instead of 0x00009028. User experience was a failing boot up sequence (crashing device during initialization): [ 181.663874] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) [ 181.664787] ath10k_pci 0000:02:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 181.688886] ath10k_pci 0000:02:00.0: device has crashed during init [ 181.688897] ath10k_pci 0000:02:00.0: failed to wait for target after cold reset: -70 [ 181.688902] ath10k_pci 0000:02:00.0: failed to reset chip: -70 [ 181.689774] ath10k_pci: probe of 0000:02:00.0 failed with error -70 Fix it by updating the address with correct value. Fixes: a521ee983d31 ("ath10k: Add new reg_address/mask to hw register table") Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c index 1414e1f3c7ac..fef7ccf6e185 100644 --- a/drivers/net/wireless/ath/ath10k/hw.c +++ b/drivers/net/wireless/ath/ath10k/hw.c @@ -63,7 +63,7 @@ const struct ath10k_hw_regs qca6174_regs = { .soc_reset_control_ce_rst_mask = 0x00000001, .soc_chip_id_address = 0x000000f0, .scratch_3_address = 0x00000028, - .fw_indicator_address = 0x00009028, + .fw_indicator_address = 0x0003a028, .pcie_local_base_address = 0x00080000, .ce_wrap_intr_sum_host_msi_lsb = 0x00000008, .ce_wrap_intr_sum_host_msi_mask = 0x0000ff00,