From: Ranjani Vaidyanathan Date: Sun, 14 Oct 2012 12:41:05 +0000 (-0500) Subject: ENGR00229470-2 MX6SL-Add support for debug UART to be sourced from 24MHz. X-Git-Tag: v3.0.35-fsl~363 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a10ce6bf6a881d1b5049992284ce81db21db93bb;p=karo-tx-linux.git ENGR00229470-2 MX6SL-Add support for debug UART to be sourced from 24MHz. If "debug_uart" is specified in the command line, uart will be sourced from 24MHz XTAL. This is required for getting the correct power measurements on MX6SL. Certain analog power optimizations are done only if ALL PLLs are bypassed on MX6SL. To verify this path, we need to ensure that UART is not sourced from PLL3. Signed-off-by: Ranjani Vaidyanathan --- diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 8a66f3eeb992..5e9594d744d9 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1742,6 +1742,8 @@ static int serial_imx_resume(struct platform_device *dev) return 0; } +extern int uart_at_24; + static int serial_imx_probe(struct platform_device *pdev) { struct imx_port *sport; @@ -1788,6 +1790,9 @@ static int serial_imx_probe(struct platform_device *pdev) ret = PTR_ERR(sport->clk); goto unmap; } + if (uart_at_24) + clk_set_parent(sport->clk, clk_get(NULL, "osc")); + clk_enable(sport->clk); sport->port.uartclk = clk_get_rate(sport->clk);