From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Thu, 22 Dec 2011 13:03:11 +0000 (-0300)
Subject: [media] bcm3510: convert set_fontend to use DVBv5 parameters
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=a27378c60247a166ed2a941043b4588695c02d91;p=mv-sheeva.git

[media] bcm3510: convert set_fontend to use DVBv5 parameters

Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.

Also, fill the supported delivery systems at dvb_frontend_ops
struct.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---

diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index 43b17fa3a19..a53f83acb38 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -479,16 +479,16 @@ static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq)
 	return -EINVAL;
 }
 
-static int bcm3510_set_frontend(struct dvb_frontend* fe,
-					     struct dvb_frontend_parameters *p)
+static int bcm3510_set_frontend(struct dvb_frontend *fe)
 {
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 	struct bcm3510_state* st = fe->demodulator_priv;
 	struct bcm3510_hab_cmd_ext_acquire cmd;
 	struct bcm3510_hab_cmd_bert_control bert;
 	int ret;
 
 	memset(&cmd,0,sizeof(cmd));
-	switch (p->u.vsb.modulation) {
+	switch (c->modulation) {
 		case QAM_256:
 			cmd.ACQUIRE0.MODE = 0x1;
 			cmd.ACQUIRE1.SYM_RATE = 0x1;
@@ -499,7 +499,8 @@ static int bcm3510_set_frontend(struct dvb_frontend* fe,
 			cmd.ACQUIRE1.SYM_RATE = 0x2;
 			cmd.ACQUIRE1.IF_FREQ = 0x1;
 			break;
-/*		case QAM_256:
+#if 0
+		case QAM_256:
 			cmd.ACQUIRE0.MODE = 0x3;
 			break;
 		case QAM_128:
@@ -513,7 +514,8 @@ static int bcm3510_set_frontend(struct dvb_frontend* fe,
 			break;
 		case QAM_16:
 			cmd.ACQUIRE0.MODE = 0x7;
-			break;*/
+			break;
+#endif
 		case VSB_8:
 			cmd.ACQUIRE0.MODE = 0x8;
 			cmd.ACQUIRE1.SYM_RATE = 0x0;
@@ -552,7 +554,8 @@ static int bcm3510_set_frontend(struct dvb_frontend* fe,
 
 	bcm3510_bert_reset(st);
 
-	if ((ret = bcm3510_set_freq(st,p->frequency)) < 0)
+	ret = bcm3510_set_freq(st, c->frequency);
+	if (ret < 0)
 		return ret;
 
 	memset(&st->status1,0,sizeof(st->status1));
@@ -819,7 +822,7 @@ error:
 EXPORT_SYMBOL(bcm3510_attach);
 
 static struct dvb_frontend_ops bcm3510_ops = {
-
+	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
 	.info = {
 		.name = "Broadcom BCM3510 VSB/QAM frontend",
 		.type = FE_ATSC,
@@ -839,7 +842,7 @@ static struct dvb_frontend_ops bcm3510_ops = {
 	.init = bcm3510_init,
 	.sleep = bcm3510_sleep,
 
-	.set_frontend_legacy = bcm3510_set_frontend,
+	.set_frontend = bcm3510_set_frontend,
 	.get_tune_settings = bcm3510_get_tune_settings,
 
 	.read_status = bcm3510_read_status,